VW Golf MK7 AUDI A3 Brake Caliper Adapter Brake System 380x38 Brake Disc Audi R8 6-piston Caliper
- ✓ 380x38 420615301K Audi R8 brake disc
- ✓ 6-piston 420615107A / 420615108A Audi R8 brake caliper
- ✓ front axle
Brake caliper adapter on Golf MK7 Audi A3 and many more model for conversion to 6-piston brake calipers from R8, combined with the Audi R8 ceramic brake discs 380x38mm.
Suitable for following vehicles:
- Audi A3
- Audi A3 Cabriolet
- Audi Q2
- VW Arteon
- VW Golf Sportsvan
- VW Golf VII
- VW Golf VII Variant
- VW Passat Variant
- VW Tiguan
- VW Touran
- Seat Ateca
- Seat Leon
- Seat Leon ST
- Skoda Octavia III
- Skoda Octavia III Combi
- Skoda Superb III
- Skoda Superb Kombi III
Advantages of this brake system:
- high deceleration, also in conjunction with our rear axle braking system
- thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles
- directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems
- Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling
Required components:
- brake caliper: Audi R8 6-piston , reference left 420615107A / right 420615108A
- brake disc: ceramic Audi R8 380x38mm, reference 420.615.301K
Delivery:
- 2x brake caliper adapters for VW Golf MK7 Audi A3 and many more
- 2x centric rings for VW Golf MK4 Audi S3 A3 Cupra R and may other models
- material certificate
Tips, information and advice:
- To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
- For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
- We cannot give you a generalised answer as to which rim size you can ride after your brake conversion. There are simply too many different wheel rims. For this reason, we have developed a template with which you can easily check whether the brake system kit fits under your rim. We have included a link to the template in the description. If your rim does not fit, you can simply use wheel spacers. >> Go directly to customised wheel spacers <<
- Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, which you can use to assemble and then install them according to your requirements. Click here for the steel flex configurator >> Configure steel flex brake line <<
- The handbrake cable must always be used from the installed calliper, which means that the new handbrake cable may have to be adjusted slightly. For conversions in which the original calliper is still used and the original handbrake cable can be used, you may have to route it more directly to compensate for the larger disc diameter and longer travel
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
18 November 2019 22:22
Christian S
Toller Support, tolle Ware super langes Rückgabe Recht... 100% zufrieden!!! MfG
9 February 2020 11:21
Peter S
Sehr gute Beratung Schnelle Lieferung
10 July 2020 03:48
Lukas H
Passt perfekt in Kombination auf dem Rs3 8p und den Radlagern vom 8J TTRS in Verbindung mit der R8 Ceramik Bremsanlage.
15 December 2023 11:05
ALEXANDRE B
SUPER PRODUIT JE RECOMMANDE
18 November 2019 22:22
Christian S
Toller Support, tolle Ware super langes Rückgabe Recht... 100% zufrieden!!! MfG
25 July 2020 05:45
Lukas H
Passt perfekt an den Rs3 8p mit den ttrs Radlager in Verbindung mit der Audi R8 Keramik Bremsanlage! Kann ich nur empfehlen!
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: