.png?ts=1749194267)
.png?ts=1749194267)
VW Corrado Golf 2 3 Passat VR6 Cayenne ZR18 Brake Caliper Adapter R32 Front Axle Brake System
- ✓ 334x32 1J0615301A 1J0615302A Golf 4 R3 brake disc
- ✓ 6-piston 95535142150 / 95535142250 Porsche Cayenne/ VW Tuareg brake caliper
- ✓ front axle
€159.56*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter for Brembo/ Porsche 6-piston brake calipers in connection with the R32 brake disc 334 x 32mm on all VW with bolt circle connection 5x100 mm, VR6 engine and plus axle.
Suitable for:
- Golf VR6
- Corrado VR6
- Passat 35i VR6
These calipers are used as standard for Porsche Cayenne, VW Touareg, and Q7.
The adapters could also be installed on other types of vehicles after a conversion to VR6 axle.
Required material for installation:
- brake caliper: ZR18 Porsche Porsche Cayenne or VW Tuareg , reference 955.351.421.50 + 955.351.422.50
- brake disc: Golf MK4 R32 334x32 mm , reference 1J0 615 301A +1J0 615 302 A
Advantages:
- best possible delay values and performance! Also indispensable for performance increases
- assembly option on all vehicles with wheel rims size 18' inch
- Components come from series production by VW
- If installed correctly, registration with the TÜV is possible.
- Including complete screw material
Is not authorized under the STVO (German Road Licensing Law). However, thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles
Delivery:
- 2x brake caliper adapters, completely galvanized (see picture)
- complete mounting screws set
- material certificate
- Template to check whether the brake system fits under your rim
- tension analysis for easier homologation
Tips, information and notes:
- For better ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
- Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, where you can assemble and then install them according to your requirements.click here for the steel braided line configurator >>configure steel braided brake line<<
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
13 March 2018 20:55
Christian B
Top Passen perfekt
19 March 2020 12:02
Fernando S
Je ne l'ai pas encore appliqué, mais je suis très satisfait du matériel. Lors de l'assemblage, j'envoie des photos.
17 May 2024 03:27
mangasvr6t
Perfecto los alemanes no fallan
14 August 2019 21:07
Wilfried A
Die Produkte von Epytec sind durchdacht und sehr passgenau. Es sind so gut wie keine Fertigungstoleranzen, ersichtlich. Die Montage erfolgt mit den dazugehörigen Schreiben und Scheiben problemlos. Mein Tüv-Ingenieur ist begeistert von der Passgenauigkeit und Materialbeschaffenheit. Die nächsten Teile sind schon bestellt.
10 August 2023 13:04
Benjamin R
Bonjour je ne peux répondre à votre mail car je nai toujours pas reçu ma commande depuis 9jours Je trouve ça très long pour une commande qui vien dAllemagne jusquà la France .
10 August 2016 10:24
oktay31oktay
Top korrekt
19 June 2024 10:11
Michael L
Passt super
18 January 2024 20:32
Vautravers F
Rien à dire,piece qui s'adapte nikel Ne pas hésité à prendre contact avec eux pour vous projets
8 April 2019 15:45
Christopher B
Optisch machen die Adapter einen sehr guten Eindruck! Die Montage war einfach und reibungslos. Ich würde jedem der solch einen Umbau durchführen möchte diese Adapter empfehlen. zur Optimierung: Das Zertifikat könnte gleich beigelegt werden! Da man es für die Tüv Eintragung benötigt. Eure Firma kam Qualitativ und sehr strukturiert und mit viel Erfahrung rüber! Skeptisch war ich eigentlich nicht! Das Ergebnis nach dem Einbau war sehr zufriedenstellend.
5 July 2025 08:56
Héctor José D
Todo perfecto
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
| Motor | Motorcode |
|---|---|
| 2.8 VR6 Syncro | 7M8|174PS(128KW) |
| 2.8 VR6 | 7M6|174PS(128KW) |
| 2.8 VR6 Syncro | 7M9|174PS(128KW) |
| 2.8 VR6 | 7M9|174PS(128KW) |
| 2.8 VR6 Syncro | 7M6|174PS(128KW) |
| 2.8 VR6 | 7M8|174PS(128KW) |
| Motor | Motorcode |
|---|---|
| 2.9 VR6 | 53I|190PS(140KW) |
| Motor | Motorcode |
|---|---|
| 2.9 VR6 Syncro | 3A5|184PS(135KW) |
| 2.8 VR6 | 3A5|174PS(128KW) |
| 2.8 VR6 | 35I|174PS(128KW) |
| 2.9 VR6 Syncro | 35I|184PS(135KW) |
| Motor | Motorcode |
|---|---|
| 2.8 VR6 | 3A2|174PS(128KW) |
| 2.8 VR6 | 35I|174PS(128KW) |
| Motor | Motorcode |
|---|---|
| 2.9 VR6 Syncro | 1H5|190PS(140KW) |
| Motor | Motorcode |
|---|---|
| 2.8 VR6 | 1H1|174PS(128KW) |
| 2.9 VR6 Syncro | 1H1|190PS(140KW) |
| Motor | Motorcode |
|---|---|
| 2.8 VR6 | 1H2|174PS(128KW) |
| Motor | Motorcode |
|---|---|
| 2.8 VR6 Syncro | 7M8|174PS(128KW) |
| 2.8 VR6 | 7M6|174PS(128KW) |
| 2.8 VR6 Syncro | 7M9|174PS(128KW) |
| 2.8 VR6 | 7M9|174PS(128KW) |
| 2.8 VR6 Syncro | 7M6|174PS(128KW) |
| 2.8 VR6 | 7M8|174PS(128KW) |
| Motor | Motorcode |
|---|---|
| 2.9 VR6 | 53I|190PS(140KW) |
| Motor | Motorcode |
|---|---|
| 2.9 VR6 Syncro | 3A5|184PS(135KW) |
| 2.8 VR6 | 3A5|174PS(128KW) |
| 2.8 VR6 | 35I|174PS(128KW) |
| 2.9 VR6 Syncro | 35I|184PS(135KW) |
| Motor | Motorcode |
|---|---|
| 2.8 VR6 | 3A2|174PS(128KW) |
| 2.8 VR6 | 35I|174PS(128KW) |
| Motor | Motorcode |
|---|---|
| 2.9 VR6 Syncro | 1H5|190PS(140KW) |
| Motor | Motorcode |
|---|---|
| 2.8 VR6 | 1H1|174PS(128KW) |
| 2.9 VR6 Syncro | 1H1|190PS(140KW) |
| Motor | Motorcode |
|---|---|
| 2.8 VR6 | 1H2|174PS(128KW) |
- ✓ Desired color can be selected
- ✓ ZR18 / ZL18 Cayenne brake calipers
- ✓ 95535142153 / 955.351.421.53 95535142253 / 955.351.422.53 7L6615123Q / 7L6615149 / 7L6615123J / 7L6615123N
- ✓ 334x32
- ✓ 65mm centering
- ✓ 35mm height
- ✓ 35% better braking performance
- ✓ 75% more service life
- ✓ low dust generation
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ 334x32
- ✓ 65mm centering
- ✓ 35mm height
- ✓ optimized paste for brake systems
- ✓ correct viscosity
- ✓ no squeaking
- ✓ Racing brake fluid
- ✓ Reduction in brake fading
- ✓ improved pedal feel
- ✓ 5x100 bolt circle
- ✓ Plug & Play
- ✓ VW Golf 2-3 / Passat / Corrado
- ✓ Registration-free
- ✓ Greenstuff sports surface
- ✓ temperature up to 650°C
- ✓ 334x32
- ✓ 65mm centering
- ✓ 35mm height
- ✓ 334x32
- ✓ 65mm centering
- ✓ 35mm height
- ✓ 191498625A Golf 2 Golf 3 Caddy
- ✓ OE quality
- ✓ front axle
- ✓ Registration-free
- ✓ Redstuff ceramic covering
- ✓ temperature up to 750°C
- ✓ Length: 52cm
- ✓ M10x1 outside 45° curved
- ✓ M10x1 inside straight
- ✓ Thread M12x1.5
- ✓ ensures comfortable installation of your upgrade brake
- ✓ makes work easier
- ✓ 334x32
- ✓ 65 mm centring
- ✓ 35 mm height
- ✓ double bolt circle 5x110 and 5x112