Brake sleeve Polo G40 & 86C Brake system conversion G60/16V Brake system Brake caliper adapter

Brake sleeve for rear axle brake system conversion on Golf 2 16V brake disc system.Tailor-made for installation on Polo and Polo G40 86C. These sleeves are required so that you can continue to use the original handbrake cable from the Polo with the Golf 2 brake calipers. Material certificate is included. Necessary components to complete the conversion: Stub axle from the Golf Gti 16V with disc brake Brake calipers Golf 2 Girling 38 Brake discs original Golf GTI 16V 226x10mm Scope of delivery: 2 x brake sleeves for Polo G40 brake conversion to G60 tuning Material certificate You will also find suitable axle journals in our range. We also have a conversion of the rear axle to 280 mm ventilated disc brakes on offer.

€33.99*

VW Golf 1 Golf 2 Golf 3 G60 16V brake disk conversion rear axle brake caliper adapter axle journal brake

Axle pivot for Golf 1, Golf 2 and Golf 3 conversion to take over disc brakes on the rear axle from the Golf 2/ 3 G60 / 16V. With these axle journals, which are simply bolted to the rear axle, the rear disc brakes can be driven 1 to 1 from the Golf G60 / 16V. This has the advantage that no complicated conversion is required. Furthermore, our large G60 brake conversions, which we offer, can also be used with these axle pivots on the Golf 1, Golf 2 and Golf 3. Only suitable for the VW Golf 2 and Golf 3 if drum brakes are fitted. The axle pivots are new and are supplied in their original packaging. The following handbrake cable is used OE part number: 191609721D Length: 1840/1220mm Scope of delivery: 2 stub axles for conversion to G60 /16V brake system on the rear axle

€80.65*

VW Golf 2 3 Seat Cupra R Brake calipers Adapter Brake system Brake caliper adapter for front axle

Product descriptionBrake caliper adapter for front axle brake system.Allows the installation of the original Seat Cupra R brake disc system with brake disc diameter 305x28mm in combination with Brembo 4 Piston brake calipers on the following VW vehicles:VW Golf 2 und 3 Seat Leon Cupra R VW Passat VW Corrado VW Jetta VW Polo Seat Toledo Installation is generally possible on all VW and Audi vehicles with bolt circle4 bolts and diameter 100mm.Attention: Please control before purchase !!!!!!!!!!Required material for installation: Seat Cupra R Brembo 4 piston brake calipers Brake discs typ Seat Ibiza Cupra R diameter 305x28mm Nr.: 6KL 615 301 Advantages:Easy and fast assemblySignificantly better perfomance than the standard brake system.Adaptor does not require rectications on your vehicle,therefore easily transformable in its original conditionAllows the installation of 16” wheel rims Scope of delivery:2 high resistant adapter-plates allowing the installation of the brake calipers and disc(see photo) Certificate of material (Proves the conformity of our product in Germany and simplifies authorization by authorities).

€264.51*

Mercedes Benz CL 65 AMG ceramic brake system SLS C197 brake caliper adapter front axle

Brake caliper adapter for the front axle of the Mercedes Benz CL65 AMG to drive the Mercedes Benz SLS AMG ceramic brake system. Advantages of this brake system: Top deceleration values, no comparison to conventional rear brake discs easy construction must have when increasing performance Material certificate is included easy to restore to original condition Required components: Mercedes SLS C197 Brake Calipers Part No. A1974212498 Ceramic brake disc from the Mercedes SLS C197 from the front axle in 410mm part number: A2314211612 Scope of delivery: 2x brake caliper adapter for Mercedes Benz CL65 AMG material certificate

€319.19*

Mercedes Benz CL 65 AMG Ceramic Brake System SLS C197 Brake Caliper Adapter Rear Axle

Brake caliper adapter, rear axle, on Mercedes Benz CL65 AMG to convert to Mercedes Benz SLS AMG ceramic brake system. Advantages of this brake system: top deceleration, without comparison with conventional brake discs easy assembly better performance supplied material certificate can easily be restored to the original state Required components: brake caliper: Mercedes SLS C197, reference A1974231098 brake disc: ceramic Mercedes SLS C197, front axle, 295mm, reference A1974230998 suitable front axle adapters are available in our shop, item no. 787. Delivery: 2x brake caliper adapters for Mercedes Benz CL65 AMG high-strength mounting screws material certificate

€250.52*

2x Brake Discs Audi A4 Avant RS4 Quattro Zimmermann 312x22 100.3353.75

We the company Epytec are your expert in brake systems and suitable brake caliper adapters for conversions. We even installed Zimmermann brake discs for more than 10 years and have only very good experiences with it. Regarding to the braking performance and the longevity, the Zimmermann brake discs are excellent. The Zimmermann sports brake discs have been developed on the basis of standard vehicle brake discs in connection with the motor sport. By combining high-quality cast materials with a perforated braking surface, an optimization of the braking system is achieved Advantages of the Zimmermann brake discs: excellent deceleration properties and no delay of the friction at high temperatures significant less weight and therefore lower mass less "hot spots" by optimized design of the ventilation ducts possible replacement of original disc 1: 1 including ABE, registration is not necessary brake tuning without conversion Delivery: 1 set (2 pieces) Zimmermann sports brake disc Manufacturer's ref. 100.3353.75 including ABE

€530.64*

2xbrake disc Audi A4 Avant RS4 quattro Zimmerman sport 312x22 100.3349.70

We the company Epytec are your expert in brake systems and suitable brake caliper adapters for conversions. We even installed Zimmermann brake discs for more than 10 years and have only very good experiences with it. Regarding to the braking performance and the longevity, the Zimmermann brake discs are excellent. The Zimmermann sports brake discs have been developed on the basis of standard vehicle brake discs in connection with the motor sport. By combining high-quality cast materials with a perforated braking surface, an optimization of the braking system is achieved Advantages of the Zimmermann brake discs: excellent deceleration properties and no delay of the friction at high temperatures significant less weight and therefore lower mass less "hot spots" by optimized design of the ventilation ducts possible replacement of original disc 1: 1 including ABE, registration is not necessary brake tuning without conversion Delivery: 1 set (2 pieces) Zimmermann sports brake disc Manufacturer's ref. 100.3349.70 including ABE

€675.81*

Brake / Pitch Bolt Circle Conversion Kit from 4x100 to 5x100 VW Golf MK1 Solid Brake Disc

Who wants to finally drive with 5x100 rims, is here just right.Complete conversion kit for front and rear axle to drive with rims PCD / Pitch Circle Diameter 5x100 on Golf MK1.Who would like to keep the brake system on his first original, but would still like to install 5x100 rims, has found the right kit here.This is probably the best alternative to our PCD adapters, because the track does not become wider.Suitable for all Golf MK1 Caddy 14d Jetta and Scirocco with solid brake discs on the front axle, 239x10mm. Advantages: no PCD adapter necessary directly to use. No drilling of the brake discs. wheel arches do not necessarily have to be pulled (of course depending on the width of the rim) Delivery: complete conversion kit for front and rear axle to drive with rims PCD / Pitch Circle Diameter 5x100 and complete brake system with wheel bearing etc. (see picture)

€308.31*

Brake / Pitch Bolt Circle Conversion Kit from 4x100 to 5x100 VW Golf MK1 Vented Brake Disc

Who wants to finally drive with 5x100 rims, is here just right.Complete conversion kit for front and rear axle to drive with rims PCD / Pitch Circle Diameter 5x100 on Golf MK1.Who would like to keep the brake system on his first original, but would still like to install 5x100 rims, has found the right kit here.This is probably the best alternative to our PCD adapters, because the track does not become wider.Suitable for all Golf MK1 Caddy 14d Jetta and Scirocco with solid brake discs on the front axle, 239x10mm. Advantages: no PCD adapter necessary directly to use. No drilling of the brake discs. wheel arches do not necessarily have to be pulled (of course depending on the width of the rim) Delivery: complete conversion kit for front and rear axle to drive with rims PCD / Pitch Circle Diameter 5x100 and complete brake system with wheel bearing etc. (see picture)

€308.31*

Conversion Kit VW Golf MK1 Caddy Jetta 16V Brake System to 5x100 G60 Disc Brake Rear Front

Who wants to finally drive with 5x100 rims, is here just right.Complete conversion kit for front and rear axle to drive with rims PCD / Pitch Circle Diameter 5x100 on Golf MK1.Who would like to convert to the G60 brake system of the Golf MK2 front and rear, but still would like to use 5x100 rims, has found the right set here.This is probably the best alternative to our PCD adapters, because the track does not become wider.Suitable for all Golf MK1 Caddy 14d Jetta and Scirocco. Advantages: no PCD adapter necessary directly to use. No drilling of the brake discs. wheel arches do not necessarily have to be pulled (of course depending on the width of the rim) Delivery: complete conversion kit for front and rear axle on model Golf MK1, with rims PCD / Pitch Circle Diameter 5x100 and complete brake system with wheel bearing, brake caliper adapter, etc. (see picture)

€410.94*

Conversion Kit VW GOLF MK1 Caddy Jetta 16V Brake System to 5x100 G60 Disc Brake Rear Front

Who wants to finally drive with 5x100 rims, is here just right.Complete conversion kit for front and rear axle to drive with rims PCD / Pitch Circle Diameter 5x100 on Golf MK1.Who would like to convert to the G60 brake system of the Golf MK2 front and rear, but still would like to use 5x100 rims, has found the right set here.This is probably the best alternative to our PCD adapters, because the track does not become wider. Suitable for all: Golf 1 Golf 1 Cabrio Jetta I Scirocco 53B Caddy14d (only in connection with our adapter plates item 597 for the rear axle) Advantages: no PCD adapter necessary directly to use. No drilling of the brake discs. wheel arches do not necessarily have to be pulled (of course depending on the width of the rim) Delivery: complete conversion kit for front and rear axle on model Golf MK1 to drive with rims PCD / Pitch Circle Diameter 5x100 and complete brake system with wheel bearing, brake caliper adapter, etc. , (see picture)

€553.52*

Screw, Hexagon Socket, Head Cap, Normal Fine Thread M5-M16 High-Strength 10.9 12.9 DIN912 8.8 Steel - Diameter/Size: M14 x 1.5- Length: 55mm - Surface: blank 12.9

Durchmesser/Größe: M14 x 1.5 | Länge: 55mm | Oberfläche: verzinkt 12.9

Cylinder head bolt with hexagon socket, normal and fine thread High-strength DIN912 screws: size: M5-M16 length: 16-180mm surface: 8.8; 10.9; 12.9

Variants from €0.56*

€3.73*

Wheel Spacer Hub Centric Track Plate Brake Disc Golf MK1 MK2 MK3 MK4 Audi

2x spacers /plates made of high-strength aluminum to be mounted under the brake discs. These spacers are used to install discs that are too large in size or diameter and thus touch the wheel axle. Thanks to our spacers, the brake discs are pushed outwards. The spacers / track plates are perfect for Golf MK3, MK4 und Audi series with 5x100 PCD brake discs, and which have a large overall height and could not otherwise be used. The new VAG models usually have a 5x112 PCD. This can be changed with a flat rate of 59 € per disc set. You can also find suitable brake caliper adapter in our shop. Due to the TÜV certificate (technical report) included in the scope of delivery, a registration can be carried out by individual acceptance. Technical data: thickness: 8 mm PCD: 5x100 hub centric: 57,1 disc diameter: 64,8 Delivery: 2x spacers / plates made of high-strenght alumium, 8mm TÜV - certificate for registration

€121.75*

Rings Adaption Handbrake BMW E30 E46 M3 Brake Rear Axle to Porsche Brake Caliper

Ring made of high-quality aluminum to adapt the handbrake function for the BMW E30 M3 when a larger brake system is converted on the rear axle. The aluminum ring serves as an adapter for the 328x20 brake disc of the BMW E46 M3. The original BMW brake disc must be used, otherwise the ring might not fit because other manufacturers have tolerances in the brake discs. The ring is suitable for our brake caliper adapter, item number 171. The ring is simply pressed into the disc and the handbrake function is fully supported again. Delivery: 2x handbrake adapter rings for BMW E30 with the dimensions 185x160x30

€178.80*

Brake Caliper Adapter Audi A4 B6 Porsche 986 Boxter Brake Conversion A8 Brake Disc

Brake caliper adapter on Audi A4 B6 B7 series to convert to Porsche 986 brake caliper, combined with the original Audi A8 brake discs 312x25mm. Suitable for the following vehicles: Audi A4 B7 Audi A4 B6 Advantages: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling. Required components: brake caliper: Porsche Boxter 986, reference 986.351.421 + 986.351.422 brake disc: Audi A8 RS 312x25mm, reference 8E0 615 301 R Delivery: 2x brake caliper adapters high-strength mounting screws Stress analysis / FEM calculation for entry material certificate

€343.20*

Mercedes Benz C63 W204 Brake System 390x36 AMG Brake Caliper Adapter 6-piston

Brake caliper adapter on Mercedes Benz C63 W204, front axle, for conversion to the Mercedes Benz C63 W204 AMG brake discs, 390x36, combined with the Mercedes Benz 6-piston brake calipers.At last an adapter to upgrade from the original 360mm to the 390mm disc of the AMG. Since you do not get the original brackets individually, they are extremely expensive.. With our adapter kit you can install the 390mm disc Plug and Play. Advantages of this brake system: top deceleration, without comparison with conventional brake discs easy assembly better performance supplied material certificate can easily be restored to the original state Required components: brake caliper: Mercedes CLS 63 AMG (C218) 6-piston, reference A1974212698 brake disc: Mercedes CLS 63 , front axle, 390x36mm, reference A2304211212 Brake disc from Mercedes AMG C63 S (S205) from the front axle in 390x36mm Part Number: A2314211812 Delivery: 2x brake caliper adapters for Mercedes Benz W204 C63 high-strength screw material material certificate installation instructions

€214.97*

Brake Caliper Adapter VW T3 Bus Audi R8 8-piston Brake Caliper 365x34 RS4 B7 Brake Disc

Brake caliper adapter, front axle, on VW T3 Bus with 2WD gearbox, to convert to 8-piston Audi R8 RS6 brake caliper, combined with the Audi RS4 B7 brake discs 365x34mm. Suitable for the following vehicles: all VW T3 Bus with 2WD gearbox Required components: special wheel hubs for front axle (Epytec item number: 341) brake caliper: original 8-piston RS4 B7 / R8 Brembo (20767502), reference left 8E0615107 / 3D0615107A + reference right 8E0615108 / 3D0615108A brake disc: Audi R8 RS5 365x34mm, reference 8E0615301AB Advantages: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling. Delivery: 2x brake caliper adapters (see pictures) high-strength mounting screws material certificate Stress analysis / FEM calculation for entry Rims: at least 18 inch

€387.25*

Hexagonal socket head cap srew M12x35x1.5 DIN 912 high resistance entirely thread Blank

Durchmesser/Größe: M12 x 1.5 | Länge: 35mm | Oberfläche: verzinkt 12.9

Hexagonal socket head cap srew high resistance entirely threadType: M12x35Thread 1.5 BlankQuality 12.9

Variants from €0.56*

€2.97*

Hexagonal socket head cap screw M12x30x1.5 Quality 12.9 DIN 912 high resistance with fine pitch thread Blank

Durchmesser/Größe: M12 x 1.5 | Länge: 30mm | Oberfläche: verzinkt 12.9

Hexagonal socket head cap screw high resistance entirely threadType: M12x30Thread 1.5BlankQuality: 12.9

Variants from €0.56*

€1.80*

Hexagonal socket head cap screw M12x20 DIN 912 high resistance with fine pitch thread Blank

Durchmesser/Größe: M12 x 1.5 | Länge: 20mm | Oberfläche: verzinkt 10.9

Hexagonal socket head cap screw high resistance entirely threadType: M12x20Thread: 1.5BlankQuality: 10.9

Variants from €0.56*

€3.00*

Hexagon screw M12x50x1.5 DIN 933 high resistance with fine pitch thread Blank

Durchmesser/Größe: M12 x 1,5 | Länge: 50mm | Oberfläche: verzinkt 10.9

Hexagon screw high resistance entirely thread Type: M12x50Thread 1.5 BlankQuality : 10.9

Variants from €0.51*

€1.73*

Hexagonal socket head cap screw M12x60x1.5 DIN 912 high resistance with fine pitch thread Blank

Durchmesser/Größe: M12 x 1.5 | Länge: 60mm | Oberfläche: verzinkt 12.9

Hexagonal socket head cap screw high resistance partial threadType: M12x60Thread 1.5 BlankQuality 12.9

Variants from €0.56*

€5.68*

Hexagonal screw M16x35x1.5 DIN 961 high resistance with fine pitch thread Blank

Durchmesser/Größe: M16 x 1,5 | Länge: 35mm | Oberfläche: verzinkt 10.9

Hexagonal screw hight resistance entirely threadType: M16x35Thread: 1.5BlankQuality: 10.9

Variants from €0.51*

€3.16*

Hexagonal screw M10x30 DIN 933 Galvanized

Durchmesser/Größe: M10 x Regelgewinde | Länge: 30mm | Oberfläche: verzinkt 8.8

Hexagonal screw entirely threadType: M10x30GalvanizedQuality: 8.8

Variants from €0.51*

€0.66*

Hexagonal screw M08x25 DIN 933 high resistance Blank

Durchmesser/Größe: M8 x Regelgewinde | Länge: 25mm | Oberfläche: verzinkt 10.9

Hexagonal screw high resistance entirely threadType: M08x25BlankQuality: 10.9

Variants from €0.51*

€0.62*

Hexagonal socket head cap screw M10x30 DIN 912 high resistance with fine pitch thread Blank

Durchmesser/Größe: M10 x 1.25 | Länge: 30mm | Oberfläche: verzinkt 12.9

Hexagonal socket head cap screw high resistance entirely threadType: M10x30Thread 1.25BlankQuality 12.9

Variants from €0.56*

€2.39*

Hexagonal socket head cap screw M10x35 DIN 912 high resistance with fine pitch thread Blank

Durchmesser/Größe: M10 x 1.25 | Länge: 35mm | Oberfläche: verzinkt 12.9

Hexagonal socket head cap screw high resistance entirely threadType: M10x35Thread 1.25BlankQuality 12.9

Variants from €0.56*

€5.55*

Hexagonal screw M10x20x1.25 DIN 961 high resistance with fine pitch thread Blank

Durchmesser/Größe: M10 x 1,25 | Länge: 20mm | Oberfläche: verzinkt 10.9

Hexagonal screw high resistance entirely threadType: M10x20Thread: 1.25BlankQuality: 10.9

Variants from €0.51*

€2.35*

Hexagonal countersunk socket screw M10x16 DIN 7991 high resistance Blank

Durchmesser/Größe: M10 x Regelgewinde | Länge: 16mm | Oberfläche: verzinkt 10.9

Hexagonal countersunk socket screw high resistanceType: M10x16BlankClass 10.9

Variants from €0.60*

€0.98*

Hexagonal screw M08x20 DIN 933 high resistance Blank

Durchmesser/Größe: M8 x Regelgewinde | Länge: 20mm | Oberfläche: verzinkt 10.9

Hexagonal screw high resistance entirely threadType: M08x20BlankQuality: 10.9

Variants from €0.51*

€0.63*

Hexagonal screw with flange M10x25 DIN 6921 high resistance Galvanized

Durchmesser/Größe: M10 x Regelgewinde | Länge: 25mm | Oberfläche: verzinkt 10.9

Hexagonal screw with flange partial thread high resistance Type: M10x25GalvanizedQuality: 10.9

Variants from €0.51*

€2.31*

Hexagonal socket head cap screw M12x65x1.5 DIN 912 high resistance with fine pitch thread Blank

Durchmesser/Größe: M12 x 1.5 | Länge: 65mm | Oberfläche: verzinkt 12.9

Hexagonal socket head cap screw high resistance with partial threadType: M12x65Thread 1.5BlankQuality 12.9

Variants from €0.56*

€5.76*

Hexagonal socket head cap screw M12x70x1.5 DIN 912 high resistance with fine pitch thread Blank

Durchmesser/Größe: M12 x 1.5 | Länge: 70mm | Oberfläche: verzinkt 10.9

Hexagonal socket head cap screw high resistance with partial threadType: M12x70Thread 1.5BlankQuality 10.9

Variants from €0.56*

€3.62*

VW T3 Bus Transporter Conversion to Porsche Brake System Brake Caliper Adapter Wheel Bearing

Brake caliper adapter for conversion to the front 4-piston Porsche Boxter S brake caliper, combined with the der 312x28er brake discs from Mercedes .With this brake conservion to Porsche brake system, the wheel hubs are supplied, which maintain the standard VW pitch circle diameter (PCD) and are identical. Advantages of this brake system are the perfect deceleration values. Rims: at least 16 inch. Required components: brake caliper: Porsche Boxter S, reference 996.351.426 + 996.351.425 brake disc: Mercedes S-Klasse 312x28 , reference WD00604 Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Delivery: 2x brake caliper adapters (see picture) 2x wheel hubs 2x wheel bearings for the front axle high strength mounting screws material certificate Stress analysis / FEM calculation for entry

€362.78*

Big Red Porsche 944 924 996 Turbo Adapter Brake Caliper Adapter Brake Caliper Adapter

Porsche caliper adapters for the transaxle series up to 190hp. With the caliper adapters you can drive the 330x34mm Porsche brake discs in conjunction with the large Porsche 996 Turbo brake.Here it is important that the small brake and the narrow axle has been installed, which have a hole size of 76mm. suitable for the following models with the narrow axles (76mm hole spacing): Porsche 944 up to 190 hp Porsche 924 up to 190 hp Important: The adapters fit only to the steering knuckle with hole size 76mm. For steering knuckles with hole size 94mm we also have suitable adapters in the program. Article 301-sonder171122 (click here) Required components: Porsche brake caliper part number: 996.351.429 / 996.351.430 (Only 100% fit with the specified Porsche calipers) Brake discs: 330 x 34 mm Brake disc left VA Porsche reference number: 996 351 409 02, 996 351 409 03, 996 351 409 04 Brake disc right VA Porsche reference number: 996 351 410 02, 996 351 410 03, 996 351 410 04 Brake pad set VA Porsche reference number: 99635194910, 99635194911, 99635194912, 99735194902 The wheel hub must be turned slightly (to size) so that the brake disc fits over it Brake caliper holder are made of high strength steel alloy including material certificate. Advantages: Extreme deceleration values also in conjunction with our rear axle brake system. By the material certificate included in the scope of supply, a registration can be made possible by individual acceptance even with series vehicles Directly suitable for the above mentioned models and therefore easily rebuildable to the original condition at any time. Our EPYTEC brake caliper adapters require no sending in of their series parts, no re-welding - re-milling or re-drilling. Scope of delivery: 2x holder (see picture) Material Certificate

€306.24*

Hub Centric Ring VW Bus T3 from 60.00 to 68.00 mm Audi Brake Disc

Hub centric ring made of steel for bracke system conversion.Our rings are necessary, when discs of car models, having a larger hub diameter, are installed on vehicles with smaller hub diameter . For example, these rings are suitable for conversion of T3 bus brake discs to brake disc system of Audi models. You will find in our shop the corresponding brake caliper adapters. All our rings are designed to be less thick than the discs, so that the rims can fit correctly. Technical data: hub centric internal diameter: 60,00 mm hub centric external diameter: 68,00 mm thickness : 7,00 mm Delivery: 1x hub centric ring for VW T3 bus and many other models with material certificate If you need several rings, you must order the number you need per unit. If you need a special ring, we make custom rings. Contact us.

€16.06*

Hexagonal socket head cap screw M10x40 DIN 912 high resistance with fine pitch thread Blank

Durchmesser/Größe: M10 x 1.25 | Länge: 40mm | Oberfläche: verzinkt 10.9

Hexagonal socket head cap screw high resistance entirely threadType: M10x40Thread 1.25BlankQuality 10.9

Variants from €0.56*

€3.30*

VW Golf 4 VW Polo 6r WRC Audi A3 TT R32 S3 Caliper Brake Adapter Brake Caliper Mounting Bracket

Brake Conversion kit with brake caliper adapters / brackets to allow fitment of the large rear brake system (256x22) from Golf 4 V6 4Motion R32, VW Polo 6r WRC, Audi TT, S3 on all vehicles with front drive of the series Golf 4 Golf 4 TT A3.The adapters are made of high-strength steel and are supplied galvanized Advantages of this brake system: top deceleration, without comparison with conventional brake discs better performance supplied material certificat the brake calipers from the 4Motion models can be fitted with our brackets. Thus, you avoid the purchase of Jubi caliper supports costing around 120 €, and which are difficult to find. Required components: original VW/Audi brake caliper 4motion original large 4motion VW/Audi disc brakes 256x22 Delivery: 2x brake caliper adapters High strength mouting screws material certificat

€34.52*

BMW E30 325i 320i Brake Caliper Adapter Rear E34 540i 294 x19 Discs Brake System 5x120

Brake caliper adapter, rear axle, for BMW E30 models to install the large rear axle caliper E34, combined with the disc of BMW E46 328i, 294x19 mm. The rims must have at least 16 inch. Required components: bracke dics rear BMW E46 328i with 294x19 mm , reference: 34 21 1 165 563 brake caliper reart BMW E34 540i ; E32 740i, 750i ; E36 M3 3,0 u. 3,2L reference: 34 21 1 160 399 reference: 34 21 1 160 400 The following modification is required: conversion to PCD 5x120 with BMW Z4 wheel hub Advantages: high deceleration thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling screws are supplied The handbrake function continues to exist Delivery: 2x brake caliper adapters high-strength mounting screws copy of vehicle documents to simplify the registration material certificate

€146.69*

Brake Caliper Adapter Golf MK2 MK3 Rear Axle 310x22 Phaeton Golf MK4 R32 Caliper

Brake caliper adapter, rear axle, on Golf MK 2 MK3 series , for conversion to 310x22 mm Phaeton brake discs, combined with the R32 / S3 brake calipers. Suitable for the following vehicles (only front WD): Golf MK1 (our item n° 306) Golf MK2 MK3 + GTI + VR6 Corrado Jetta Passat 35i Scirrocco Vento Polo 6N1 Seat Cordoba Seat Ibiza Seat Toledo Advantages of this brake system: High deceleration Thanks to the material certificate supplied with the order, it is possible to approve your purchase even for series vehicles Directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling. Required components: brake calipe: VW Golf R32 V6 or S3 , left VW reference 8N0615423C / right VW reference 8N0615424C brake caliper mounting bracket: reference 8N0615425B brake disc: internally vented VW Phaeton 310x22mm referencde 3D0 615 601 D The bolt circle must be changed to 5x120 (feasible in our house for € 149 for the pair of brake discs) The adapters are delivered black galvanized, which means: the best protection against corrosion and super optics. Delivery: 2x brake caliper adapterfor VW Golf MK1 MK2 MK3 Caddy Scirocco Jetta VR6 etc. 2x wheel hubs with double PCD, 5x100 and 5x112 2x centring rings complete screw kit (10.9) material certificate

€252.88*

Ford Capri Escort Adapter modification brake discs rear axle brake system

Adapter plates for rear axle disc brake system for Ford Capri 1,2,3 and Ford Escort 1 , RS 2000. Full adaptation/fixation kit for brake calipers coming originally from Ford Sierra or Scorpio. No overheating like currently with the standard drum brakes. Assembly option on all vehicles with wheel rims size 13'' Required components: Brake discs from Ford Scorpio Sierra with disc brakes on the rear axle 253x11 Manufacturer number: 5815202536 Brake calipers of the same model. The components from the Scorpio Cosworth with internally ventilated discs can also be used, but it is then important that the brake calipers and brake caliper brackets are also taken from the Corsworth. Advantages: Extreme deceleration values also in connection with our rear axle brake system The material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles Directly suitable for the above models and can therefore be restored to the original condition at any time without any problems Our EPYTEC brake caliper adapters do not require you to send in your serial parts, no re-welding - re-milling or re-drilling. Scope of delivery: 2x adapter conversion brake discs rear axle for Ford Capri Escort Certificate of material High resistant fixation screws Copy of the german document 'Fahrzeugbrief' (equivalent with the English vehicle registration card). Proves the conformity of our product in Germany and simplifies authorization by authorities.

€215.09*

Opel Kadett C Coupe Manta Ascona 16V C20xe Brake caliper Caliper Adapter Front axle brake disc system

Full adaptation/fixation kit for ventilated 16V brake system (calipers and discs)coming originally from Kadett E Calibra Vectra A Astra GSI /16V C20XE for installation on front axle of the following cars: Kadett C Limo Coupe and City Manta B Ascona B Advantages: Best possible deceleration values and performance, also indispensable for performance increases Centering and screws for GSi brake disc available Internally ventilated brake discs, no more overheating and fading. 14 inch rims can be driven Components come from series production by Opel and are easy to obtain If installed correctly, registration with the TÜV is possible. Our adaptation plates need to be installed between the original fixation of the brake disc an the brake disc on the wheel hub.This allows to maintain the width of the wheel lane.There is a centering for the GSI brake disc on the adapters. Rectifications needed for the execution of the conversion: a steering stopper needs to be installed. the centering of the brake disc needs to be modified 70,1 mm on the mesure of our adapter plate (also made by EPYTEC) Scope of delivery: 2x adapter plates completely galvanized 8x high-strength screws to mount the brake disc, these must be shortened so that the full thread of the wheel hub can be used material certificate For the rear axle brake system on we suggest a conversion set from our shop.

€181.05*

Complete Kit Rear Golf MK3 Porsche + S3 5-hole Brake Caliper Adapter Hub Adapter Rear Axle 5x100 + S3 R32

Radnaben Lochkreis: 5x100

Brake caliper adapters with special hub / hub adapter for vehicles with 5x100 PCD in order to install rear brake caliper of Porsche 996 and Audi S3 8L / VW Golf MK4 R32, drive with the front 280mm brake disc of the Passat 35i Vr6 with a total height of 29mm on the rear axle.In this case, the S3 R32 calipers have only function of hand brake. These are necessary because the Porsche calipers do not have the function of hand brake. Suitable for the following VW und Seat models: Golf MK1 (only with our axle pivot - see item 313 in our shop.) Golf MK2 MK3 + GTI+ VR6 Corrado Jetta Passat 35i Scirrocco Vento Polo 6N1 Seat Cordoba Seat Ibiza Seat Toledo Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system better performance supplied material certificate Technics: The Porsche calipers are mounted between the axle beam and the axle stub. The necessary screws are supplied. The adapters for the S3 / R32 caliper are mounted onto the original Golf MK2 /MK3 bracket. With our supplied hub spacers, the 280 mm brake discs are centered and screwed. The track is wider by about 16 mm per side.The inside of the hub spacer is manufactured like the originals and therefore the wheel bearing remains the same.Not permitted under the STVO (German Road Licensing Law). However, thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehiclesFor the rear axle, we offer brake adapters for conversion to the Porsche brake system, combined with the R32 brake discs. Visit our shop.For vehicles equipped with ABS, the ABS disc of all Golf MK3 models can be kept and adjusted exactly on our hub spacers. Required components: brake caliper: Porsche , reference: 996.352.421 + 996.352.422 rear axle: brake caliper with mounting brackets from Audi S3 8L or VW Golf R32 front 280mm brake discs from VR6. Total height: 28,5mm VAG reference : 1H0615301 brake disc PCD habe to be modified to 4x100 (service available from EPYTEC) Delivery: 2x special hubs / hub adapters with 5x100 PCD 2x brake caliper adapters high strength mounting screws material certificate

Variants from €392.98*

€394.80*

Complete Kit Rear Golf MK3 Porsche + S3 4-hole Brake Caliper Adapter Hub Adapter Rear Axle 5x100 + S3 R32

Radnaben Lochkreis: 4x100

Brake caliper adapters with special hub / hub adapter for vehicles with 4x100 PCD in order to install rear brake caliper of Porsche 996 and Audi S3 8L / VW Golf MK4 R32, combined with the front 280mm G60 GTI 16V brake discs on the rear axle.In this case, the S3 R32 calipers have only a function of hand brake. These are necessary because the Porsche calipers do not have the function of hand brake. Suitable for the following VW und Seat models: Golf MK1 (only with our axle pivot - see item 313 in our shop.) Golf MK2 MK3 + GTI+ VR6 Corrado Jetta Passat 35i Scirrocco Vento Polo 6N1 Seat Cordoba Seat Ibiza Seat Toledo Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system better performance supplied material certificate Technics: The Porsche calipers are mounted between the axle beam and the axle stub. The necessary screws are supplied. The adapters for the S3 / R32 caliper are mounted onto the original Golf MK2 / MK3 bracket. With our supplied hub spacers, the 280 mm brake discs are centered and screwed. The track is wider by about 16 mm per side. The inside of the hub spacer is manufactured like the originals and therefore the wheel bearing remains the same.Not permitted under the STVO (German Road Licensing Law). However, thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehiclesFor the rear axle, we offer brake adapters for conversion to the Porsche brake system, combined with the R32 brake discs. Visit our shop.For vehicles equipped with ABS, the ABS disc of all Golf MK3 models can be kept and adjusted exactly on our hub spacers. Required components: brake caliper: Porsche , reference: 996.352.421 + 996.352.422 rear axle: brake caliper with mounting brackets from Audi S3 8L or VW Golf R32 brake disc: Golf G60 5-hole 280mm VR6 brake disc PCD habe to be modified to 4x100 (service available from EPYTEC) Delivery: 2x special hubs / hub adapters with 4x100 PCD 2x brake caliper adapters Porsche 2x brake caliper adapters Audi S3 8L /VW Golf MK4 R32 2x centric rings high strength mounting screws material certificate

€392.98*

Ford Taunus disc brake adapter rear axle brake caliper adapter brake caliper

1 set rear brake caliper adapter for Ford TaunusWith these adapters, the internally ventilated Sierra / Scorpio brake system can be used on the Taunus rear axle. All you need is the discs and calipers from the Sierra/Scorpio! Advantages: No overheating like currently with the standard drum brakes. Assembly option on all vehicles with wheel rims size 13'' Easily transformable in its original state. The material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles Brake disc size: 253x20mm internally ventilated 4x 108 bolt circle Scope of delivery: Brake caliper adapter made of high-strength steel materials certificate

€299.00*

BMW E46 M3 Brake Caliper Adapter Rear Porsche Caliper E46 M3 328x20 Brake Disc

Brake caliper adapter on rear axle of BMW E46 M3 for the conversion to the large E46 M3 328x20 mm brake discs, combined with the caliper of Porsche 986. Suitable for all M3 E46 models without required modifications. The brake system can also be mounted on all other E46 models without problem. It is only necessary to convert to the M3 E46 axle stub / pin or wheel hub. Advantages: high deceleration thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Rims: at least 16 inch.click here for installation instructions Required components: brake caliper: Porsche 986 reference 986.352.421 + 996.352.422 brake disc: BMW E46 M3 328x20mm reference 34212282303 + 34212282304 Front brake pads from Porsche Boxster 986 2.7 the brake pads must be slightly chamfered at the upper edge, as they are slightly overhanging Delivery: 2x brake caliper adapters for BMW E46 M3 high-strength mounting screws material certificate Stress analysis / FEM calculation for entry vehicle document to simplify the registration installation instructions

€175.60*

Brake Caliper Adapter Golf MK1 Rear Axle to 310x22 Phaeton Golf MK4 R32 Caliper

Brake caliper adapter, rear axle, for the mentioned below models to install the Phaeton brake dics 310x22 mm, combined with the original R32 / S3 caliper Suitable for the following vehicles (front WD only): VW Golf MK1 VW Gol MK1 Cabrio Caddy 14d Jetta 1 Golf 2 3 + GTI+ VR6 Corrado Jetta Passat 35i Scirrocco Vento Polo 6N1 Seat Cordoba Seat Ibiza Seat Toledo Advantages of this brake system: High deceleration Thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles Directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling. Required components: internally vented brake discs 335x22 of VW Phaeton, reference: 3D0 615 601 D (the 5x112 PCD must be modified to 5x100, what we can do ourselves in our workshops) brake caliper and brake from R32 / S3 The adapters are delivered black galvanized, therefore best rust protection and great look! Delivery: 2x brake caliper adapters VW Golf MK1 MK2 MK3 Caddy Scirocco Jetta VR6, etc 2x axle stubs, left and right 2x wheel hubs 4x100 or 5x100 PCD 2x suitable centric rings complete screw kit (10.9) material certificate

€286.48*

Details

BMW E30 325i 320i Brake Caliper Adapter rear Porsche E46 M3 328x20 brake disc

Brake caliper adapter, rear axle, for BMW E30 to install the large E46 M3 brake discs, combined with the 328x20 mm brake caliper of Porsche 996.In this kit, there are two rings in order to adapt the handbrake.Suitable for M3 E30 models without modification. The brake system can also be installed on all other E30 models without problems. It is only necessary to convert on the M3 E30 steering stub axles or wheel hubs. Advantages: high deceleration thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling. Rims: at least 16 inch. Required components: brake caliper: Porsche 996, reference 996.352.421 + 996.352.422 the original BMW brake disc must be used, because the handbrake ring could not fit otherwise, since other manufacturers have tolerances in the brake discs brake disc: BMW E46 M3 328x20mm, reference 34212282303 or 34212282304 Delivery: 2x brake caliper adapters for BMW E30 2x O-rings to adapt the handbrake high-strength mounting screws copy of a vehicle document to simplify the registration material certificate

€380.23*

VW Polo 9N Audi S3 335x22 Brake Caliper Adapter Rear Axle

Brake caliper adapter, rear axle, for Polo 9N to convert the 335x22 mm Phaeton brake discs, combined with the original R32 / S3 brake calipers. Suitable for the following vehicles (only 4WD: Polo 9N Advantages of this brake system: high deceleration thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: Audi S3 8L or VW Golf R32 brake disc: internally vented VW Phaeton 335x22mm , reference 4E0615601L (modification of the PCD 5x112 to 5x100 is necessary. This can be modified by us at an avarage price of 59.- € per disc set Delivery: 2x brake caliper adapters high strength mounting screws (10.9) material certificate

€219.00*

Opel Corsa Tigra AB Brake Caliper Adapter Rear Axle Conversion

Adapter für den Umbau auf Scheibenbremsen an der Hinterachse passend für Corsa A B und Tigra. Benötigte Komponenten: Bremssättel vom Astra F / Kadett E / Vectra A Herstellernummer: BHN111E / paarige Art.Nr. BHN110E Bremsscheiben, sowie Handbremsseil vom Astra F / Kadett E / Vectra A Funktionsbeschreibung: Die Platten werden an die Original Corsa bzw. Tigra Hinterachse geschweißt, somit kann die komplette Astra Kadett Vectra Scheibenbremsanlage der Hinterachse verbaut werden. Eine Einbauanleitung mit Bilder wird mitgeliefert. Lieferumfang: Einbauanleitung 2x Adapter 2x Handbremsbleche Materialzertifikat

€203.45*

Complete Kit Rear Golf MK3 Porsche + S3 5-hole Brake Caliper Adapter Hub Adapter Rear Axle 5x100 + S3 R32

Brake caliper adapters with special hub / hub adapter for vehicles with 5x100 or 4x100 PCD in order to install rear brake caliper of Porsche 996 and Audi S3 8L / VW Golf MK4 R32, combined with the front 280mm G60 GTI 16V brake discs on the rear axle.In this case, the S3 R32 calipers have only function of hand brake. These are necessary because the Porsche calipers do not have the function of hand brake. Suitable for the following VW und Seat models: Golf MK1 (only with our axle pivot - see item 313 in our shop.) Golf MK2 MK3 + GTI+ VR6 Corrado Jetta Passat 35i Scirrocco Vento Polo 6N1 Seat Cordoba Seat Ibiza Seat Toledo Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system better performance supplied material certificate Technics: The Porsche calipers are mounted between the axle beam and the axle stub. The necessary screws are supplied. The adapters for the S3 / R32 caliper are mounted onto the original Golf MK2 /MK3 bracket. With our supplied hub spacers, the 280 mm brake discs are centered and screwed. The track is wider by about 16 mm per side.The inside of the hub spacer is manufactured like the originals and therefore the wheel bearing remains the same.Not permitted under the STVO (German Road Licensing Law). However, thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehiclesFor the rear axle, we offer brake adapters for conversion to the Porsche brake system, combined with the R32 brake discs. Visit our shop.For vehicles equipped with ABS, the ABS disc of all Golf MK3 models can be kept and adjusted exactly on our hub spacers. Required components: brake caliper: Porsche , reference: 996.352.421 + 996.352.422 rear axle: brake caliper with mounting brackets from Audi S3 8L or VW Golf R32 front 280mm brake discs from VR6. Total height: 28,5mm VAG reference : 1H0615301 brake disc PCD habe to be modified to 4x100 (service available from EPYTEC) Delivery: 2x special hubs / hub adapters with 5x100 or 4x100 PCD 2x brake caliper adapters high strength mounting screws material certificate

€392.98*

Details

BMW E30 E32 740i Rear Brake Caliper Adapter with 294 x19 Disc Brake System

Brake caliper adapter for BMW E30 rear axle to install the large E32 rear brake caliper, combined with the BMW E46 328i brake disc , 294x19 mm. Including corresponding O-rings. Rims: at least 16 inch. Required components: Rear brake discs BMW E46 328i with 294x19 mm part no: 34 21 1 165 563 Rear brake calipers BMW E32 740i 40/20 part no: 34 21 1 160 399 part no: 34 21 1 160 400 the following modification is necessary for the conversion PCD modification from 5x120 to 4x100 Advantages of this brake system: high deceleration thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Delivery: 2x brake caliper adapters (see picture) complete mounting screws set 2x corresponding O-rings. cop of vehicle documents to simplify the registration material certificate

€183.19*

Golf MK1 MK2 MK3 Corrado Scirrocco Brake Caliper Adapter Porsche 996 Brake System 280 Brake Disc - Wheel Hub Hole Number: 5 Holes

Radnaben Lochkreis: 5x100

Brake caliper adapters with special wheel hub / hub adapter for vehicles with 5x100 bolt circle/pitch circle in order to install rear brake caliper of Porsche 996, combined with the front 280mm VR6 brake discs on the rear axle. Suitable for the following VW und Seat models: Golf MK1 (only with our axle pivot - see item 313 in our shop.) Golf MK2 MK3 + GTI+ VR6 Corrado Jetta Passat 35i Scirrocco Vento Polo 6N1 Seat Cordoba Seat Ibiza Seat Toledo Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system better performance supplied material certificate Technics: The Porsche calipers are mounted between the axle beam and the axle stub. The necessary longe screws are supplied. Thanks to our wheel hubs (in the shop we also have a complete kit with S3 calipers for the handbrake function, which we recommend), the 280mm brake discs are centered and screwed on. The track is wider by about 16 mm per side. The inside of the hub spacer is manufactured like the originals and therefore the wheel bearing remains the same.Not permitted under the STVO (German Road Licensing Law). However, thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehiclesFor the rear axle, we offer brake adapters for conversion to the Porsche brake system, combined with the R32 brake discs. Visit our shop.For vehicles equipped with ABS, the ABS disc of all Golf MK3 models can be kept and adjusted exactly on our hub spacers. Required components: brake caliper: Porsche 996, reference 996.352.421 + 996.352.422 Delivery: 2x special wheel hubs / hub adapters with 5x100 bolt circle/pitch circle 2x brake caliper adapters high strength mounting screws material certificate

Variants from €370.88*

€372.95*

Porsche HA Adapter mit Radnabe ohne S3 /Golf 3

Bremssattel Adapter mit speziellen Radnaben für Fahrzeuge mit 4x100 oder 5x100 Lochkreis um die hinteren Bremssättel vom Porsche 996 in Verbindung mit den vorderen 280mm Vr6 Vorderachs Bremsscheiben an der Hinterachse zu fahren Adapter sind passend für folgende VW und Seat Modelle: Golf 1 ( nur in Verbindung mit unseren Achszapfen (Artikel Nr: 313 die wir im Programm haben) Golf 2 3 + GTI+ VR6 Corrado Jetta Passat 35i Scirrocco Vento Polo 6N1 Seat Cordoba Seat Ibiza Seat Toledo Vorteile dieser Bremsanlage: Top Verzögerungswerte , kein Vergleich zu den herkömmlichen Bremsscheiben hinten ein Muss bei Leistungssteigerung Materialzertifikat wird mitgeliefert Technik: Die Bremssattel Adapter werden zwischen Achskörper und Achszapfen montiert. Die dafür benötigten längeren Schrauben sind im Lieferumfang enthalten. Mit Hilfe unserer Radnaben (im Shop haben wir auch einen Komplett Kit mit S3 Sättel für die Handbremsfunktion, welchen wir empfehlen) werden die 280mm Bremsscheiben zentriert und angeschraubt.Die Spur wird um ca 16 mm pro Seite breiter. Die Radnaben sind an der Lagerinnenseite baugleich wie die Originale.Daher können die Original- radlager weiterverwendet werden.Nicht im Bereich der STVO zugelassen, durch das im Lieferumfang enthaltene Materialzertifikat kann jedoch eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werdenPassend für die Vorderachse bieten wir Ihnen Bremssatteladapter für eine Umrüstung auf die Porschebremsanlage in Verbindung mit der R32 Bremsscheibe an. Schauen Sie in unserem Shop. Bei Fahrzeugen mit ABS kann der ABS Ring von allen 3er Golf Modellen passgenau an unsere Radnaben übernommen werden. Benötigte Komponente: Porsche Bremssattel Teile Nr: 996.352.421 + 996.352.422 Lieferumfang: 2 spezielle Radnaben mit 4x100 Lochkreis 2 Stück Bremssattel Adapter hochfestes Befestigungsschrauben Material Materialzertifikat

€370.88*

Details

Passat 3BG Skoda Superb Audi A6 C5 4B Rear axle Brake disc system Brake caliper adapter Conversion S6 4F 330x22mm

Brake caliper adapter for rear axle brake system to fix brake discs typ S6 4f diameter 330x22mm in combination with Vw/Audi standard brake calipers. Tailor-made for Audi /VW vehicles with front-wheel drive and serial brake discs typ 269x22mm. Construction year: From ’96 on. AUDI A6 (4B, C5) AUDI A6 Avant (4B, C5) VW Passat (3B + 3BG ) VW Passat Variant (3B + 3BG ) Skoda Superb (3U4) Required components Audi VW Quattro brake calipers from e.g. Audi Quattro S6, Passat W8 V8 VAG: 4B0 615 423; 4B0 615 424 (originally installed with the 269x22 brake disc) Brake discs typ A6 4f 330x22 mm Nr.OE-VAG: 4F0 615 601 F (ATE Nr: 24.0122-0223.1 ) Advantages of this braking system: Best deceleration values Significantly better perfomance than the standard brake system. Components come from series production by VW/Audi The registration for public road use should be no problem with correct and complete execution of the work. Scope of delivery: 2x brake caliper adapter completely galvanized (see photo) Certificate of material

€203.63*

Caddy 14d disc Brake Caliper Adapter G60 caliper Rear Lowering

Rear axle adapter kit to convert the Caddy 14D rear axle to G60 disc brake. Advantages: ability to brake and vent a lot better than a conventional drum brake top otics and profesionnal conversion lowered rear axle by 25mm thanks to the material certificate supplied with the order and to a correct conversion, it is possible to register your purchase even for series vehicles can always be restored to the original state without any problems With our brake caliper adapters, the G60 brake discs and brake calipers can be installed onto the Caddy 14d. With our adapter, the track is 15mm wider per side and the vehicle ist 25mm deeper on the rear axle. You only need the G60 axle stubs of the rear axle. Delivery: 2x brake caliper adapters (high-strength steel) high-strength mounting screws (10.9) material certificate Installation instructions With this conversion kit, the S3 / R32 brake can be installed in conjunction with our spacer adapter, combined with the 280mm brake discs on the rear axle. In our shop, we also have corresponding adapters for the front axle to convert to the G60 280 brake. Visit our shop!

€135.21*

VW Golf MK4 VW Polo 6r WRC Audi A3 TT R32 S3 Brake Caliper Adapter Brake System

Brake caliper adapter inorder to install thelarge rear brake system (256x22) from Golf Mk4 V6 4Motion R32 , VW Polo 6R WRC, Audi TT 8N, S3 into all front-wheel-drive vehicles ef the series Golf 4 TT A3. Adapters are made of high-strength steel and are supplied galvanized.The adapter has a thickness of 6mm and a hole spacing of 90mm. Advantages of this brake system: top deceleration, without comparison with conventional brake discs, rear better performance supplied material certificate the brake calipers from the 4Motion models can be fitted with our brackets. Thus, you avoid the purchase of Jubi caliper supports costing around 120 €, and which are difficult to find. Required components: brake caliper: VW Golf R32 V6 or S3 brake caliper left VW reference 8N0615423C, brake caliper right VW referecne 8N0615424C brake caliper mounting braket: reference 8N0615425B brake disc: VW+ Audi 4motion 256x22mm longer fixation screws (also including screws available from us under item no. 683) Delivery: 2x brake caliper adapters material certificate

€24.34*

Audi 100 S4 C4 200 20v Turbo V8 A6 S6 4b VW Passat Rear Brake Caliper Adapter

Brake caliper adapter for original brake calipers in connection with the large 330 x22 brake disc from the S6 4f suitable for all VW/Audi with rear axle brake discs in size 269x22 e.g.: Audi 100 S4 C4 Audi 200 20V Turbo Quattro AUDI A6 TDI AUDI A6 4,2 AUDI A6 Avant AUDI A6 Quattro AUDI S6 V8 Quattro AUDI S6 V8 Avant VW Passat W8 4-Motion VW Passat 2,8 4-Motion VW Passat 2,5 TDI 4-Motion Can also be used in conjunction with all A6 4b and Passat models with small brake discs. There you have to get the ventilated brake calipers of the above models! Required components: Brake calipers Girling 41/43 Teilenummer: 4B0615424 Brake caliper brackets must also be from the calipers that were originally installed with the 269x22 disc Brake discs typ A6 4f 330x22 mm Nr.OE-VAG: 4F0 615 601 B Advantages: Best possible delay values and performance! Also indispensable for performance increases Components come from series production by VW/Audi The material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles Scope of delivery: 2 high resistant adapter galvaniced (see photo) suitable screw set high-strength material certificate

€93.38*

Seat Ibiza 6L VW Polo 9N Audi A1 Brake Caliper Adapter Porsche Caliper R32 Rear Axle

Brake caliper adapter on rear axle for conversion to rear brake caliper of Porsche 996, combined with the 280 mm VR6 front brake discs. The Porsche calipers are connected to the hydraulics of the vehicle and can thus develop an enormous braking force. Since these have no handbrake functions, the rear Audi S3 or Golf MK4 R32 is also used as a hand brake caliper adapter. The hydraulic connection is thereby closed with a blind plug / closure cap, thus this serves only as a hand brake caliper. Suitable for the following vehicles: Ibiza 6L Polo 9N Audi A1 Advantages of this brake system: top deceleration, without comparison with conventional brake discs better performance supplied material certificate can always be restored to the original state without any problems Technics: The Porsche calipers are mounted between the axle beam and the axle stub. The necessary screws are supplied. The track is wider by about 16 mm per side. Not permitted under the STVO (German Road Licensing Law). However, thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles. For the rear axle, we offer brake adapters for conversion to the Porsche brake system, combined with the R32 brake discs. Visit our shop.For vehicles equipped with ABS, the ABS can be used. Required components: brake caliper Porsche 996 reference 996.352.421 + 996.352.422 brake caliper Golf 4 R32 VW reference left 8N0615423C + right 8N0615424C brake caliper mounting bracket: VW reference 8N0 615 425 B or painted in blue from the R32: 1J0 615 425 F brake disc: VR6 GTI 16V 280mm with cup depth 28.5mm VAG-reference: 1H0615301 and VAG-reference 1H0615301A Delivery: 2x brake caliper adapters for conversion to Porsche 2x brake caliper adapters for installing S3 /R32 handbrake caliper high strength mounting screws material certificate

€609.69*

VW Golf R32 Corrado 1 2 3 S3 Rear Brake Caliper Adapter G60 VR6 256x22

Brake caliper adapter for Golf MK1 MK2 MK3 to install rear internally vented brake system from Golf MK4 V6/R32 Audi S3 8L, YoC 1999, (256x22 bracke disc). Suitable for the following VW and Seat models: Golf 2 3 + GTI+ VR6 Corrado Jetta Passat 35i Scirrocco Vento Polo 6N1 Polo 9N Seat Cordoba Seat Ibiza Seat Toledo Golf 1 (Nur bei Umbau auf 5x100 Lochkreis/Passende Radnaben für die Vorderachse gibt es bei uns im Shop) Advantages of this brake system: top deceleration, without comparison with conventional brake discs registration is possible by using original VW / Audi parts better eperformance 5x100 P.C.D. is maintained cheap spare parts Required components: R32/S3 bracke discs rear (256x22 5x100 P.C.D) R32/S3 bracke caliper rear Brake caliper carrier part number: 8N0615425B axle pin, reference. 6XO 501 117 and 6XO 501 118 (right and left) built in Polo 1995-2002 und Lupo 1999-2006 article APA259 Polo 9N hub, part number FAG: 713610490 Other conversion options: As can be seen from the pictures of our customers, it is possible with this system to install the brake discs Phaeton 310x22, combined with brake calipers of the Golf 5 R32. Delivery: 2x adapter plates 2x spacer plates copy of vehicle documents to simplify the registration material certificate For the front axles, we propose you caliper adapters for conversion to Porsche brake system, combined with R32 brake discs. Visit our shop!

€95.31*

New VW T3 bus wheel hubs for brake caliper adapter brake caliper adapter rear axle

New T3 bus wheel hubs for the rear axle. Since the wheel hubs for the rear axle on the T3 are no longer available, we have themnow in stock. The wheel hubs have been completely remanufactured, suitable for the T3 Bus rear axle conversion kit for disc brakes, which you can find in our shop. The weak point of the T3 are clearly the brakes. Especially the undersized rear drum brake. We have therefore developed a conversion kit to convert to the Golf Passat 16V Vr6 brake system in conjunction with Audi brake discs. The wheel hubs have new bolts pressed in. Depending on the conversion, you may need longer wheel bolts if, for example, you still have to drive spacers or rims are installed that have a "large" shaft length. These wheel hubs fit all VW T3 Bus / Transporter. Scope of delivery: 2 completely newly manufactured T3 Bus wheel hubs for the rear axle.

€296.77*

VW T3 BUS Rear axle brake adapter T4 Brake disc transformation Brake caliper adapter

Disc brake adapter to convert the T3 BUS to brake discs on the rear axle of the T4. The holders are made of high-strength steel, completely galvanized. With these adapters, both T4 brake discs, i.e. both the 280 and the 294 brake discs with T4 brake calipers can be used. When buying the components, you only have to make sure that if you want to install the 280 brake disc, for example, you also use the brake calipers and brake caliper carrier that were originally installed with this brake disc. Advantages of this brake system: The remaining fading on the original brake system is gone. Significantly better perfomance than the standard brake system. The material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles Quick and easy assembly possible with the supplied screws The wheel hubs must be turned off for the rear disc or can also be ordered from us. Required material for installation: Brake discs from VW BUS T4 280x12 mm 15 inch VAG: 7D0 615 601 or for 16 inch 294x13.5 OE numbers: 7D0615601C Brake caliper bracket from VW BUS T4 280x12 mm 15 inch VAG:7D0615425B oor for 16 inch OE number: 7D0615425A Brake calipers from the VW BUS T4 15 inch OE number: 7D0 615 424B or for 16 inch OE number: 7D0 615 424A Longer studs for the rear axle The following brake cable fits without modifications to the vehicle if the sleeve is laid generously at the bottom of the swing arm: Brake cable Golf 2, Jetta 2 1988-1992. Cable 1622 mm/ sheath 1221 mm, vehicles with rear disc brakes (except G60) No.: 191 609 721 Suitable adapters for the front axle are also available from us. Scope of delivery: 2x conversion adapter for VW T3 to T4 brake discs for the rear axle Set of matching centering rings Complete set of high resistant srews Certificate of material Copy of the german document 'Fahrzeugschein' (equivalent with the English vehicle registration card). Proves the conformity of our product in Germany and simplifies authorization by authorities.

€217.96*

VW T3 BUS Rear axle brake adapter Girling 38 Brake disc transformation 268x10mm Brake caliper adapter

Complete conversion kit to convert the T3 BUS to brake discs on the rear axle. Advantages of this brake system are:: Top deceleration values no more overheating and fading of the brakes Very favorable procurement of the components TÜV registration with supplied material certificate possible Quick and easy assembly by supplied screws! including brand new wheel hubs with wheel studs Required conversion components:: Brake discs 268x10 height 45,7 from VW Sharan 2.8 VR6 (7M8, 7M9, 7M6) (1995 ) VW NR: 7M0615601 brake caliper Girling 38 OE NR:191615423 + 191615424 matching brake caliper holder OE NR :1H0615426 Brake pads OE NR: 1H0698451F VW Golf 3 4 G60 VR6 etc. it must be checked whether possibly longer wheel bolts for the rear wheel hub must be used, when using e.g. track plates or the rim thickness. Handbrake cable from VW Golf 2 and Jetta OE NR: 191609721D Length: 1840/1220mm Advantages:: Extreme deceleration values also in conjunction with our rear axle brake system. Due to the material certificate included in the scope of delivery, a registration by individual acceptance can also be made possible for series vehicles Direct fit to above mentioned models and therefore at any time problem-free again into the original condition re-toolable Our EPYTEC brake caliper adapters require no sending in of your series parts, no re-welding - re-milling or re-drilling. Scope of delivery: 2x brake caliper holder 2x new manufactured wheel hubs matching centering rings material certificate Complete set of high strength bolts for both sides.

€440.81*

VW T3 bus disc brake rear axle conversion adapter brake brake system brake caliper adapter

Disc brake adapter to convert the T3 BUS to brake discs on the rear axle. Advantages of this brake system: Top deceleration values no more overheating and fading of the brakes Very cheap procurement of the components TÜV registration with supplied material certificate possible Quick and easy assembly possible with the supplied screws! The diameter of the wheel hub on rear axle of your vehicle needs to be modified to allow complet installation of our kit.We have a tailor-made one for this kit in our shop article nr. 358 >>Click here and go directly to the wheel hubs<< Required conversion components: Brake discs 268x10 height 45.7 from the VW Sharan 2.8 VR6 (7M8, 7M9, 7M6) (1995) VW NR: 7M0615601 Brake calipers Girling 38 OE NR: 191615423 Matching brake caliper holder OE NR: 1H0615426 Brake pads OE NR: 1H0698451F VW Golf 3 4 G60 VR6 etc. Longer wheel studs for the rear wheel hub. Handbrake cable from VW Golf 2 and Jetta OE NR: 191609721D Length: 1840/1220mm Advantages: Extreme deceleration values also in connection with our rear axle brake system The material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles Directly suitable for the above models and can therefore be restored to the original condition at any time without any problems Our EPYTEC brake caliper adapters do not require your standard parts to be sent in, no re-welding - re-milling or re-drilling. Scope of delivery: 2 high resistant adapter-plates Set of matching centering rings Complete set of high resistant srews Directions for use for correct installation Certificate of material (Proves the conformity of our product in Germany and simplifies authorization by authorities).

€194.25*

Audi S6 A6 C5 Passat V8 A8 Brake disc transformation Brake caliper adapter Rear axle brake adapter 310x22

Brake caliper adapter to mount brake discs 310x22mm on the rear axle Audi A8 in connection with the original brake calipers. Suitable for all: Audi A6/ S6 C5 (Type 4B) year of manufacture 1997-2004. VW Passat B5 Type 3B not suitable for the C5 2.7T, 2.7T four-wheel drive, V8 four-wheel drive, or RS6 When converting to the larger A8 brake discs, the braking performance is significantly increased due to the efficiency and better cooling of the brake discs. Another advantage is that the brake discs of the A8 cost almost half compared to the original 269x22 brake discs. Thus, our holders have already paid for themselves after the first brake conversion. With this conversion, 17 inch rims can still be retained. Required components: A8 brake discs 310x22 (ATE No: 24.0122-0212.1) Advantages: Extreme deceleration values also in connection with our rear axle brake system The material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles Directly suitable for the models mentioned above and can therefore be restored to the original condition at any time without any problems Our EPYTEC brake caliper adapters do not require your standard parts to be sent in, no re-welding - re-milling or re-drilling. Delivery: 2x brake caliper holder (see picture) high-strength screw material materials certificate

€144.89*

Passat 3BG Skoda Superb Audi A6 C5 4B Rear axle Brake disc system Brake caliper adapter Conversion S6 4F 330x22mm

Brake caliper adapter for rear axle brake system to fix brake discs typ S6 4f diameter 330x22mm in combination with Vw/Audi standard brake calipers. Tailor-made for Audi /VW vehicles with front-wheel drive and serial brake discs typ 256x22mm. Construction year: From ’96 on as: AUDI A6 (4B, C5) AUDI A6 Avant (4B, C5) VW Passat (3B + 3BG ) VW Passat Variant (3B + 3BG ) Skoda Superb (3U4) Required material for installation: Passat 3BG Audi S4 B5 brake calipers Lucas Girling 54 (Originally they’re mounted with 256 x22 mm brake discs) Brake discs typ S6 4f 330x22 mm OE-VAG no: 4F0 615 601 F (ATE Nr: 24.0122-0223.1 ) Advantages: Best possible delay values and performance! Also indispensable for performance increases Components come from series production by VW/Audi The material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles. Scope of delivery: 2 high resistant adapter-plates(see photo) Certificate of material

€209.27*

Audi S4 RS4 Passat W8 4motion Quattro Rear axle Brake disc system Brake caliper adapter 335x22

Brake caliper adapter for original brake calipers in conjunction with the large, internally ventilated 335x22mm brake disc from the Audi A8. Suitable for all VW/Audi with original rear axle brake discs in the size 256x22. Exact fit for the following vehicles: Audi A4 S4 RS4 (8D2, B5 ) Quattro (RS4 only fit facelift with 256x22 ventilated brake discs original rear if the 312x22 brake disc is installed original then di brake caliper carrier from the smaller brake in 256x22 are needed). VW Passat ( 3B2 3B3 3B5 3B6 ) 4motion / Syncro Required components: Brake discs from the A8 / 335x22mm OE number VAG: 4E0 615 601 L(ATE Nr: 24.0122-0214.1 ) Advantages of this brake system: Best possible deceleration values and performance! Indispensable also for performance upgrades Components come from series production of VW/Audi Very inexpensive brake disc procurement Due to the material certificate included in the scope of delivery, a registration by individual acceptance can also be made possible for series vehicles. With this brake should be driven at least 19 inch rims. Do not fit without modifications with the RS4 wheels! Hiweiß: It may happen from time to time that the caliper bracket because of its Gus Tolerantzen is not mashaltig and must be processed. Scope of delivery: 2x Brake caliper adapter completely galvanized (see picture) 4x high-strength screw M10x1,25x25 Material certificate Installation instructions

€134.60*

Caddy 14d Brake Caliper Adapter Brake Disc G60 Rear Lowering

Rear axle adapter kit to convert the Caddy 14D rear axle to G60 disc brake. Advantages: ability to brake and vent a lot better than a conventional drum brake top optics and profesionnal conversion lowered rear axle by 25mm thanks to the material certificate supplied with the order and to a correct conversion, it is possible to register your purchase even for series vehicles can always be restored to the original state without any problems With our brake caliper adapters and the supplied axle pins / stubs, the G60 brake discs and brake calipers can be installed on the Caddy 14d. With our adapter, the track is 15mm wider per side and the vehicle ist 25mm deeper on the rear axle. Delivery: 2x brake caliper adapters (high-strength steel) 2x axle pins / stubs 2x bushs made of high-strength aluminium for the hand brake cable high-strength mounting screws (10.9) material certificate Installation instructions With this conversion kit, the S3 / R32 brake can be installed in conjunction with our spacer adapter, combined with the 280mm brake discs on the rear axle. In our shop, we also have corresponding adapters for the front axle to convert to the G60 280 brake. Visit our shop!

€177.37*

Audi S2 brake caliper adapter rear axle 302x12 brake disc brake system conversion

Brake caliper adapter to mount 302x12mm brake discs on the rear axle of the Audi S2 Coupe (not suitable for Avant and Limo) and identically constructed rear axles Audi A6.With our adapters, the original Audi S2 Coupe brake calipers on the rear axle can be retained. The brake caliper carrier must be minimally processed with a file (0.5-0.7 mm) on the inside dimension where the disc runs! Required components: A6 brake discs from all-wheel drive 302x12mm is the exact part number: 24.0112-0176.1 412176 Advantages of this brake system: Extreme deceleration values also in connection with our front axle brake system The material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles Directly suitable for the models mentioned above and can therefore be restored to the original condition at any time without any problems Our EPYTEC brake caliper adapters do not require your standard parts to be sent in, no re-welding - re-milling or re-drilling. We also offer a suitable brake system for the front axle. Have a look in our shop! Scope of delivery: 2x brake caliper(see picture) high-strength screw material material certificate

€151.11*

VW Golf Scirocco Corrado G60 VR6 16V Brake Caliper Adapter Porsche Rear Axle 280x20

Brake caliper adapter, rear axle, on various VW and Seat models, for conversion to rear brake caliper from Porsche 996, combined with the front brake discs VR6 280mm . Suitable for the following VW und Seat models: Golf MK1 (only with our axle pivot - see item No 313 in our shop) Golf MK2 MK3 + GTI+ VR6 Corrado Jetta Passat 35i Scirrocco Vento Polo 6N1 Seat Cordoba Seat Ibiza Seat Toledo Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system better performance supplied material certificate Technics: The brake caliper adapter are mounted between the axle beam and the axle stub. The necessary screws are supplied. With our hub spacers ( not supplied in this kit , and available with 4 or 5 holes according to the model) , the 280 mm brake discs are centered and screwed (in our shop you will find the complete kit). The track is wider by about 16 mm per side. The inside of the hub spacer is manufactured like the originals and therefore the wheel bearing remains the same.Not permitted under the STVO (German Road Licensing Law). However, thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehiclesFor the rear axle, we propose brake adapters for conversion to the Porsche brake system, combined with the R32 brake discs. Visit our shop.For vehicles equipped with ABS, the ABS disc of all Golf MK3 models can be kept and adjusted exactly on our hub spacers. Required components: brake caliper: Porsche , reference: 996.352.421 + 996.352.422 2x special wheel hubs with which the VR6 disk can be exactly mounted depending on the model, the 4 or 5 hole wheel hubs are available. With 4 holes, the brake discs have to be modified. (click here) brake disc: VR6 , VAG reference : 357698151C Delivery: 2x brake caliper adapters high strength mounting screws material certificate This kit is only for the circuit since there is no cable handbrake.We have the same kit also with handbrake function under the item No 678 in the shop.

€268.21*

VW T3 bus brake conversion Porsche brake caliper rear axle Brake caliper adapter Doka 300x22

Brake caliper adapter, rear axle on all T3 bus models for conversion combined with the Porsche brake calipers. In addition, a handbrake caliper and handbrake cable from the Golf 4 R32 must be installed.The adapters are made of high-strength steel and completely galvanized. The Porsche calipers are connected to the vehicle's hydraulics and can therefore develop enormous braking power. However, since these do not have a handbrake function, the rear Audi S3 or Golf 4 R32 is also used as a handbrake caliper adapter. The hydraulic connection is sealed with a blind plug. Thus, this only serves as a handbrake caliper. On the T3 BUS with ABS, the holders have to be adjusted a little. The fact that the wheel bearing housing has 2 small bulges on the right and left prevents the adapter from being fully seated. To do this, 2 small bevels can simply be sanded. Then the adapter fits perfectly and the distances between the brake caliper and disc fit The adapter is mounted in such a way that the Porsche brake caliper sits towards the front axle and the handbrake caliper towards the rear axle. Advantages: top deceleration the system no longer warms up and no mor thanks to the material certificate supplied with the order, it is possible to register your purchase quick and easy assembly with the supplied mounting screws For rear discs, the hubs must be modified.(even the ones we have in the range have to be turned off a bit) Required components: brake discs from A4 S4 rear axle 300x22mm , original reference : 8E0 615 601 R brake caliper from Porsche 996 (rear axle) reference: 996.352.422 + 996.352.421 (only 100% fits with the indicated Porsche calipers) brake caliper VW Golf 4 R32 for handbrake function , left VW reference: 8N0615423C, right VW reference: 8N0615424C Matching brake pads hand brake caliper part number: JZW698451 brake caliper support / bracket VW reference 8N0 615 425 B. longer stud bolts for the rear axle Corresponding adapters for the front axle also are available from us! Delivery: 2x brake caliper adapters for VW T3 to Porsche, rear axle 2x matching center rings high-strength mounting screws material certificate Stress analysis / FEM calculation for entry

€355.06*

Golf MK1 MK2 MK3 Corrado Scirrocco Brake Caliper Adapter Porsche 996 Brake System 280 Brake Disc - Wheel Hub Hole Number: 4 Holes

Radnaben Lochkreis: 4x100

Brake caliper adapters with special hub / hub adapter for vehicles with 4x100 bolt circle/PCD in order to install rear brake caliper of Porsche 996, combined with the front 280mm VR6 brake discs on the rear axle. Suitable for the following VW und Seat models: Golf MK1 (only with our axle pivot - see item 313 in our shop.) Golf MK2 MK3 + GTI+ VR6 Corrado Jetta Passat 35i Scirrocco Vento Polo 6N1 Seat Cordoba Seat Ibiza Seat Toledo Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system better performance supplied material certificate Technics: The Porsche calipers are mounted between the axle beam and the axle stub. The necessary longe screws are supplied. Thanks to our wheel hubs (in the shop we also have a complete kit with S3 calipers for the handbrake function, which we recommend), the 280mm brake discs are centered and screwed on. The track is wider by about 16 mm per side. The inside of the hub spacer is manufactured like the originals and therefore the wheel bearing remains the same.Not permitted under the STVO (German Road Licensing Law). However, thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehiclesFor the rear axle, we offer brake adapters for conversion to the Porsche brake system, combined with the R32 brake discs. Visit our shop.For vehicles equipped with ABS, the ABS disc of all Golf MK3 models can be kept and adjusted exactly on our hub spacers. Required components: brake caliper: Porsche 996, reference 996.352.421 + 996.352.422 Delivery: 2x special hubs / hub adapters with 4x100 bolt circle/PCD 2x brake caliper adapters high strength mounting screws material certificate

€370.88*

Seat Ibiza 6L VW Polo 9N Audi A1 Adapter Porsche brake caliper rear axle

Bremssattel Adapter um die hinteren Bremssättel vom Porsche 996 in Verbindung mit den vorderen 280 mm G60 VR6 GTI 16V Bremsscheiben an der Hinterachse zu fahren. Adapter sind passend für folgende Modelle: Ibiza 6L Polo 9N Audi A1 Vorteile dieser Bremsanlage: Top Verzögerungswerte! Kein Vergleich zur den herkömmlichen Bremsscheiben hinten ein Muss bei Leistungssteigerung Materialzertifikat wird mitgeliefert Einfach wieder in original Zustand rückrüstbar Technik: Die Bremssattel Adapter werden zwischen Achskörper und Achszapfen montiert. Die dafür benötigten längeren Schrauben sind im Lieferumfang enthalten. Die Spur wird um ca 16 mm pro Seite breiter. Nicht im Bereich der STVO zugelassen. Durch das im Lieferumfang enthaltene Materialzertifikat kann jedoch eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werden.Passend für die Vorderachse bieten wir Ihnen Bremssatteladapter für eine Umrüstung auf die Porschebremsanlage in Verbindung mit der R32 Bremsscheibe an. Schauen Sie in unserem Shop!Bei Fahrzeugen mit ABS kann das ABS weiter verwendet werden Benötigte Komponenten: Porsche Bremssattel Teile Nr: 996.352.421 + 996.352.422 Lieferumfang: 2 Stück Bremssattel Adapter hochfestes Befestigungsschraubenmaterial Materialzertifikat

€432.42*

VW Golf MK4 1.8 T Leon Cupra R Jubi GTI Adapter S3 R32 Brake Caliper Adapter

Brake caliper adapter for Golf MK4, rear axle, to install the brake caliper of R32 / S3, combined with the brake disc 310x22 mm Phaeton. Suitable for following vehicles (only front-wheel drive): VW Golf 4 1.8T 180 PS Jubi GTI VW Golf 4 2,3L 170 PS VW Polo 6r WRC Audi TT 8N Audi A1 Seat Leon Cupra R 1.8T 209 PS Seat Leon Cupra R 1.8T 225 PS. Advantages of this brake system: high deceleration thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: internally vented brake discs 310x22 from VW Phaeton, reference: 3D0 615 601 D (PCD 5x112 must be modified to 5x100, which can also be made in our house) brake caliper and brake pads from R32 / S3 part number: 1J0 615 425 D brake support left Bora 1,8t 180HP Golf MK4 jubinot S3/4WDpart numbre: 1J0 615 426 D brake support right Bora 1,8t 180HP Golf MK4 jubinot S3/4WD The adapters are supplied black galvanized, best rust protection and super optics! Delivery: 2x brake caliper adapters VW Golf MK4 Seat Leon Cupra R complete mounting screws set (10.9) material certificate Stress analysis / FEM calculation for entry

€157.09*

BMW E36 M3 Brake Caliper Adapter Rear Axle Porsche Rear Brake 328x20

Brake caliper adapters for the rear axle of BMW E36 M3 to install the rear brake caliper of Porsche 986, combined with the 328x20mm E46 M3 brake discs. Thanks to our adapter, the Porsche brake caliper is simply screwed to the original axle instead of the original caliper. Advantages of this brake system: top deceleration, without comparison with conventional brake discs easy assembly better performance supplied material certificate can easily be restored to the original state Required components: brake caliper: Porsche 986 rear, reference : 986.352.422 + 986.352.421 brake disc: BMW E46 M3 rear 328x20mm Delivery: 2x brake caliper adapters for BMW E36 M3 high strength mounting screws material certificate

€227.56*

VW Golf 5 6 Jetta 3 Audi A3 Seat Leon Skoda brake caliper adapter R8 TT brake system ceramic brake disc tuning adapter

Brake caliper adapter for aluminium rear axle on all 4WD Golf MK5, MK6, Audi A3, etc, for conversion to R8 brake system. The conversion is combined with the 356x22 mm brake discs from Audi R8/S8, rear.The calipers are connected to the hydraulics of the vehicle and can thus develop an enormous braking force. Adapters are suitable for the following VW and Audi models with aluminum axle OE: 1k0505433/ 1k0505434: Audi A1 (8X) Audi A3 (8P) VW Golf V (1K) VW Golf VI (5K) VW Golf Variante V (1K) VW Golf Variante VI (5K) Seat Altéa (5P) Skoda Octavia (1Z) Skoda Octavia (5E) Skoda Superb (3T) Advantages of this brake system: top deceleration, without comparison with conventional brake discs better performance supplied material certificate Required components: brake caliper: Audi R8 floating brake caliper rear axle from Audi R8 brake disc: 356x22 from Audi R8/S8 Delivery: 2x brake caliper adapters for Audi R8 caliper 2x brake caliper adapers for R8 hand brake caliper high strength mounting screws material certificate

€368.91*

BMW E30 325i 320i Brake Caliper Adapter E46 M3 328x20 Brake Disc

Brake caliper adapter, rear axle, for BMW E30 to install the large E46 M3 brake discs, combined with the 328x20 mm brake caliper of Porsche 996.Suitable for M3 E30 models without modification. The brake system can also be installed on all other E30 models without problems. It is only necessary to convert on the M3 E30 steering stub axles or wheel hubs. Advantages: high deceleration thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling. Rims: at least 16 inch. Required components: brake caliper: Porsche 996, reference 996.352.421 + 996.352.422 brake disc: BMW E46 M3 328x20mm, reference 34212282303 or 34212282304 Delivery: 2x brake caliper adapters for BMW E30 high-strength mounting screws copy of a vehicle document to simplify the registration material certificate

€323.08*

Brake Caliper Adapter Golf MK5 MK6 Bora Audi A3 R8 RS7 S7 S8 Ceramic Brake Disc

Brake caliper adapter to convert the rear axle (aluminium) from all 4WD Golf MK4 Bora Vento Audi A3 to R8 RS7 S7 S8 brake system, ceramic.The conversion is combined with the 370x30 mm ceramic brake discs of Audi R8, front. The calipers are connected to the hydraulics of the vehicle and can thus develop an enormous braking force. However, these do not have handbrake functions. The rear floated caliper of Audi R8 is additionally used as handbrake caliper adapter. The hydraulic connection is thereby closed with a blind plug / closure cap, thus this serves only as a hand brake caliper. Suitable for the following VW and Seat models (4WD) with aluminium axle stub: Audi A3 8P Seat Leon VW Golf MK5 R32 VW Bora/Jetta MK5 Golf MK6 Advantages of this brake system: top deceleration, without comparison with conventional brake discs better performance supplied material certificate Required components: brake caliper: Audi RS7 S7 S8 rear floated caliper of Audi R8 brake disc: Audi RS7, S7 , S8 370x30mm ceramic Delivery: 2x brake caliper adapters for Audi RS7 S7 S8 caliper 2x brake caliper adaper for R8 hand brake caliper high strength mounting screws material certificate Notes/tips: For a better ventilation of the brake system, we recommend removing the dust cover plates and brake anchor plate. For brake conversion on the rear axle, we recommend that you generally proceed as follows: install the adapter with the necessary components and then check if new brake lines are required. Because, depending on the vehicle, the lines may be too short or the line tips may not suitable. We advise you to change to steel braided brake line because of the quality and technical advantage. Specifically for this, we have developed an online brake line configurator, where you can assemble the type of steel braided brake lines you want. Click here to go to the configurator >> Stahlflex-Bremsleitung konfigurieren << always use the hand brake cable of the installed brake caliper. So sometimes you have to modify / adapt the new handbrake cable. For conversions, where the original caliper is used and the handbrake cable can be used, you may need to pull the cable without any other fittings (ie directly) to compensate for the long distance due to the large diameter of the large brake discs.

€598.54*

Audi TT 8j Quattro Rear Axle Brake Caliper Adapter 356x22 mm A6 Brake Disc

Brake caliper adapter on Audi TT 8j Quattro model, rear axle for conversion to 356x22 mm A6 brake discs, combined with the original brake calipers. Suitable for following vehicles with original 310x22 brake discs Audi TT 8j Quattro Advantages of this brake system: high deceleration thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling. Required components: brake discs: 356x22 from Audi A6 , reference 4H0 615 601 F original brake calipers and pads from Audi TT 8j Quattro perforated Wave brake disc from Audi RS7 356x22 mm part number: 4G8.615.601 Info: If you want to run a perforated brake disc, the Wave brake disc from the Audi RS7 with 356x22mm (part number: 4G8.615.601) will also fit, as the Audi S6 S7 S8 brake disc is not available perforated. The brake discs are otherwise exactly identical in dimensions. Delivery: 2x brake caliper adapters for Audi TT 8j Quattro material certificate

€262.99*

Brake Caliper Adapter Rear Axle Audi A4 S4 B5 Audi S4 B7 Brake Disc 300x22

Brake caliper adapter for rear axle of Audi A4/S4, combined with the RS4 B5 brake calipers and brake discs from Audi S4 B7. Suitable for the following vehicles : Audi A4 B5 Audi S4 B5 Advantages of this brake system: discs are cheap, also in our shop high deceleration thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling. Required components: brake discs: Audi S4 B7 300x22 mm , reference 8E0615601K Brake calipers and caliper brackets must be those of the RS4 B5 Delivery: 2x brake caliper adapters high-strength mounting screws material certificate rims: at least 17 inch

€144.82*

Bremssattel Adapter Golf 5 Bora Vento Audi A3 A6 TT Porsche 996 Bremsscheibe Hinterachse

Brake caliper adapter around the rear axle (steel axle) of all front-wheel drive Golf 5 Bora Vento Audi A3 ect. to convert to Porsche. The combination is used in conjunction with the 330x22 mm brake discs from the Audi A6. The Porsche calipers are connected to the vehicle's hydraulics and can therefore develop enormous braking power. However, since these do not have a handbrake function, the rear Audi S3 or Golf 4 R32 is also used as a handbrake caliper adapter. The hydraulic connection is sealed with a blind plug, so it only serves as a handbrake caliper. Adapters are suitable for the following VW and Seat models (front-wheel drive with steel axle): Audi A3 8P Seat Leon SeatToledo Skoda Octavia VW Golf mk5 VW Bora/Jetta mk5 Touran caddy 3 Suitable for all vehicles listed that have a steel knuckle installed (not suitable for vehicles with aluminum knuckles) Advantages of this braking system: Top deceleration values, no comparison to conventional rear brake discs a must when increasing performance Material certificate is included Required components: Porsche brake caliper adapter part no: 996.352.421 + 996.352.422 Rear axle brake calipers with holder from the Audi S3 8L or VW Golf R32 Rear brake disc 330x22 from the Audi A6 part no. 4F0.615.601.B Handbrake cable from the Golf 4 Variant or Skoda Octavia Scope of delivery: 2x caliper adapters for Porsche calipers and R32 / S3 handbrake calipers 2x centering rings high-strength fastening screw material material certificate

€888.47*

VW Golf Scirocco Corrado VR6 16V Brake Caliper Adapter S3 R32 Brake System - 4 holes

Radnaben Lochkreis: 4x100

Brake caliper adapter, rear axle, with special wheel hubs on various VW and Seat models, for conversion to rear brake caliper from Golf 4 V6 / R32 Audi S3 8L (YoC 1999), combined with the front brake discs VR6 280mm. Suitable for the following VW und Seat models: Golf MK1 (only with our axle pivot - see item No 313 in our shop) Golf MK2 MK3 + GTI+ VR6 Corrado Jetta Passat 35i Scirrocco Vento Polo 6N1 Seat Cordoba Seat Ibiza Seat Toledo Technics: Thanks to our wheel hubs (available with 4 or 5 holes according to the model) , the 280 mm brake discs are centered and screwed. The track is wider by about 6-8mm per side. The inside of the wheel hubs are manufactured like the originals and therefore the wheel bearing remains the same. When the wheel hub must be modified to 4-hole, the brake discs must be re-drilled. This service is available from EPYTEC for 69 € per set (2 pieces). Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system better performance supplied material certificate very cheap spare parts thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles For the front axle, we propose brake caliper adapters for conversion to the Porsche brake system, combined with the R32 brake discs. Visit our shop! Required components: brake caliper: left VW reference 8N0615423C, right VW reference 8N0615424C brake caliper mounting bracket: VW reference 8N0 615 425 B or lacquered blue from R32, 1J0 615 425 F Golf 2 G60 brake disc 280x22mm VW Part Number 535615301 pot depth 40mm Delivery: 2x brake caliper adapters 2x wheel hubs for brake disc fixation, 4-hole material certificate Stress analysis / FEM calculation for entry

€223.96*

Audi RS4 B5 Brake Caliper Adapter Rear Brake System 356x22mm RS 6 4G

Brake caliper adapte, rear axle, on Audi RS4 B5 for conversion to brake caliper und brake caliper mounting bracket from Audi S4 B6, combined with the brake discsfrom RS 6 4G ,356 x 22mm. Suitable for the following vehicles: Audi RS4 (8D2, B5 ) Required components: brake caliper: Audi S4 B6 brake caliper mounting bracket: Audi S4 B6 brake disc: Audi RS6 4G 356x22mm, reference 4G0615601 Advantages of this brake system: high deceleration thanks to the material certificate supplied with the order, it is possible to approve your purchase even for series vehicles components come from series production of VW / Audi With this brake, at least 18 inch rims should be used. Do not fit without changes with the RS4 wheels Delivery: 2x brake caliper adapters, completly galvanized (see picture) material certificate

€159.14*

Ford Focus Volvo S40/V50 C30 C70 ST Brake Caliper Adapter Porsche 996 Jaguar 355x32 Brake Disc

Brake caliper adapter suitable for all: Ford Focus MK2 (except RS) Volvo S40/V50 C30 C70 , YoC from 2004 combined with the Porsche 996 4 piston brake calipers and the 355x32mm brake discs from Jaguar. Advantages: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: Porsche 996 , reference 996.351.430 brake disc: Jaguar XK 8 4,2L 355x32mm reference C2C25337 (also available from EBC directly from us) Lieferumfang: 2x brake caliper adapters for Ford Focus MK2 ST and Volvo S40/V50 C30 C70 high strength mounting screws 2x centric rings corresponding steel braided brake lines material certificate copy of vehicle document to simplify the registration Notes/tips: For a better ventilation of the brake system, we recommend removing the dust cover plates and brake anchor plate. For brake conversion on the rear axle, we recommend that you generally proceed as follows: install the adapter with the necessary components and then check if new brake lines are required. Because, depending on the vehicle, the lines may be too short or the line tips may not suitable. We advise you to change to steel braided brake line because of the quality and technical advantage. Specifically for this, we have developed an online brake line configurator, where you can assemble the type of steel braided brake lines you want. Click here to go to the configurator >> Stahlflex-Bremsleitung konfigurieren << always use the hand brake cable of the installed brake caliper. So sometimes you have to modify / adapt the new handbrake cable. For conversions, where the original caliper is used and the handbrake cable can be used, you may need to pull the cable without any other fittings (ie directly) to compensate for the long distance due to the large diameter of the large brake discs.

€494.52*

Subaru Imbreza WRX Bremssattel Adapter Bremsscheibe WRX 289mm

Bremssattel Adapter für den Subaru Imbreza von Baujahr 1993- 2000 ( Nicht passend beim STI ). Mit unserem Bremssattel Adapter kannst du die große Bremsanalage vom Subaru WRX ab Baujahr 2001 verbauen Vorteile dieser Bremsanlage: Extreme Verzögerungswerte auch in Verbindung mit unserer Hinterachsbremsanlage Durch das im Lieferumfang enthaltene Materialzertifikat kann eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werden Direkt passend an die oben genannten Modelle und daher jederzeit problemlos wieder in den Originalzustand rückrüstbar Unsere EPYTEC Bremssattel Adapter erfordern keine Einsendung von euren Serienteilen, kein umschweißen, umfräsen oder umbohren. Benötigte Komponenten: Bremssättel vom Subaru Imbreza WRX ab Baujahr 2001 Teilenummer: 26692FA060 / 26692FA041 Bremsscheibe 289mm Teilenummer: 26700-AE081 Lieferumfang: 2x Bremssattel Adapter für den Subaru Imbreza WRX von Baujahr 1993-2000 komplettes Befestigungsmaterial Material Zertifikat

€269.00*

Brake Caliper Adapter VW T5 T6 Bus Adapter 365x34 Brake Disc Audi RS4 B7 Brake Caliper 8-piston

Brake caliper adapter on VW T5 bus model for conversion to RS4 B7 8-piston Brembo brake calipers, combined with the 365x34 brake dics from Audi RS4 B7. Suitable for following vehicles: VW T5 bus, front axle VW T6 bus, front axle Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: Brake discs from the Audi RS4 B7 365x34 mm part number: 8E0615301AB high 46,5mm brake caliper: Audi RS4 B7 8-piston Brembo (20767502) , reference left 8E0615107 / 3D0615107A , reference right 8E0615108 / 3D0615108A PCD and hub bore hole have to be modified Lieferumfang: 2x brake caliper adapters high-strength mounting screws material certificate

€218.99*

Bremssatteladapter Audi A8 8 Kolben Bremssättel 345x30mm A4 A5 Q5 Bremsscheibe

Bremssatteladapter für 345x30mm Bremsscheibe vom Audi A4, A5, Q5 in Verbindung mit den 8 Kolben Bremssättel vom Audi R8. Passend für folgende Fahrzeuge: AUDI A8 Baureihe Baujahr 99 Benötigte Komponenten: Bremssattel Audi R8 Teilenummer: 4E0 615 107 bzw. 108 Bremsscheiben vom Audi A4 345x30mm OE-Nummer: 100 3332 52 Vorteile dieser Bremsanlage: bestmögliche Verzögerungswerte und Performance! Unverzichtbar auch bei Leistungssteigerungen Komponenten kommen aus Serienfertigung von VW/Audi Kostengünstiges Upgrade, da nur neue Bremsscheiben benötigt werden durch das im Lieferumfang enthaltene Materialzertifikat kann eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werden Lieferumfang: 2x Bremssatteladapter komplett verzinkt Material Zertifikat

€249.00*

Brake Caliper Adapter VW Passat 3BG Brake Conversion Audi RS4 B5 Brake Disc Porsche Panamera Brake Caliper

Brake caliper adapter, front axle, on models VW Passat 3BG, for conversion to dBrembo / Porsche Panamera 6-piston brake caliper, combined with the Audi RS4 B5 brake discs 360 x 32mm. Suitable for the following vehicles: Passat 3BG Required components: brake disc: Audi RS4 B5 360x32 , reference 8D0615302B or RS4 B7 365x34 , reference 8E0615301AB brake caliper: Porsche Cayenne 958 GTS Panamera, reference 7PP615149J / 7PP615150J (Shaft length from the caliper must be 82mm, see yellow mark on the last picture) brake pad: reference 95835193910 Advantages of this brake system: top deceleration, without comparison with conventional brake discs rims: 17 inch components come from the series production of VW registration is possible if correct assembly. including set of mounting screws Delivery: 2x brake caliper adapters, completely galvanized for Passat 3BG complete mounting screws set material certificate

€198.49*

Opel Kadett Astra Omega Porsche Brake calipers Adapter Brake system Brake caliper adapter for front axle

Brake caliper adapter to use Porsche 6-piston calipers from the Porsche Cayenne (18 inch) part number 955.351.421 / 955.351.422, in conjunction with the brake discs from the A8 A6 S8 with the dimensions 347x30 part no. 4F2 4F5 PR 1ZL these only have to be attached to the centering can be adjusted. Perfect fit for all Omega A B. With wheel hub conversion to 5x110 bolt circle on all Opel models e.g. Astra, Calibra, Kadett & Vectra struts to mount. Relatively low conversion effort for enormous braking power Advantages: Extreme deceleration values also in connection with our rear axle brake system The material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles Directly suitable for the above models and can therefore be restored to the original condition at any time without any problems Our EPYTEC brake caliper adapters do not require your standard parts to be sent in, no re-welding - re-milling or re-drilling. tipps und tricks: The Audi brake disc fits despite the different bolt circle of 5x112 because there are M14 holes in the brake disc. The brake disc only has to be turned to the centering diameter from 68mm (Audi) to 70mm (Opel). This means the disc is perfectly centered 8can also be done in-house. Info: The pre-facelift wheel hubs are larger in diameter than the facelift wheel hubs, so they either have to be turned off in the outer diameter or the facelift wheel hubs with wheel bearings must simply be used. The included bushings are optional because there were two different axle types, but in most cases they are not required. Scope of delivery: 2 x caliper adapters Set of high-strength screws materials certificate Stress analysis for better registration

€306.79*

Opel Kadett Calibra Vectra Porsche Brake calipers Adapter Brake system Brake caliper adapter for front axle

Brake caliper adapter for the large Vectra C GTS brake discs 314 x 28mm to be used in conjunction with the Porsche Boxster S and 996 brake calipers (996.351.425 or 426). Can be used without modifications on all Opels with a standard 5x110mm bolt circle such as Omega A B Otherwise with wheel hub conversion to 5x110 bolt circle on all Opel models e.g. Astra, Calibra, Kadett & Vectra can be mounted directly on the strut. low conversion effort for enormous braking power. Advantages: Extreme deceleration values also in connection with our rear axle brake system The material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles directly suitable for the above models and can therefore be restored to the original condition at any time without any problems our EPYTEC brake caliper adapters do not require you to send in your serial parts, no re-welding - re-milling or re-drilling. Scope of delivery: material certificate 2x brake caliper adapters for Vectra C discs with Porsche 996 brake calipers high-strength screw material

€207.59*

Brake Caliper Adapter VW T3 Bus Conversion Porsche Brake System

Brake caliper adapter, VW T3 Bus to convert to front 4-piston Porsche Boxter brake caliper, combined with the 312x28mm Mercedes brake disc. With this brake conversion to Porsche brake system, the wheel hubs,which are supplied, maintain the standard VW PCD (bolt circle) and are identical. Therefore the wheel bearing remains the same. The track is wider by about 6 mm per side. Our adapter kit works with or without ABS. Rims: at least 16 inch Required components: brake caliper: Porsche Boxter , reference 996.351.426 + 996.351.425 (only 100% suitable for the mentioned Porsche calipers) brake disc: Mercedes S-Klasse 312x28 , reference WD00604 Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Delivery: 2x brake caliper adapters (see pictures) 2x wheel hubs high-strength mounting screws 2c center rings material certificate Stress analysis / FEM calculation for entry

€315.16*

Audi 80 90 S2 brake caliper adapter Audi A8 brake disc 323x30 RS3 brake calipers tuning adapter

Brake caliper adapter to mount the Audi RS3 brake calipers in conjunction with the 323x30 brake discs from the Audi A8, on the Audi S2 and Audi 80 / 90, with original 5x112 or 5x112 bolt circle conversions. The standard Audi PCD can be maintained. Furthermore, 16 inch rims can be maintained with this brake system. Required components: brake caliper: Audi RS3 , reference : left 8J0 615 107 + right 8J0 615 108 brake disc: Audi A8 323x30 OE-reference 24.0130-0183.1 Wheel hub from the Audi S2 with 5x112 must be installed (also available in our shop. Item number: 46859) Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling quick and easy assembly Our adapters are supplied galvanized, anti-corrosive according to DIN ISO 9227 Delivery: 2x brake caliper adapters (see picture) Stress analysis matching set of screws material certificate

€334.42*

VW Syncro T3 BUS Front axle brake adapterAudi Ate 57 Brake disc transformation 312x25mm Brake caliper adapter

Brake caliper adapter to convert the T3 BUS Syncro to ventilated 312x25 brake discs with Audi A6 calipers. Advantages of this brake system: Top deceleration values no more overheating and fading of the brakes very cheap procurement of the components. You can find used brake calipers from as little as 49 euros/new brake discs from as little as 70 euros TÜV registration possible with the supplied material certificate quick and easy assembly possible with the supplied screws Required conversion components: Brake discs 312x25 mm Audi A4 Quattro, Audi A6 e.g. 4B0 615 301 A. Brake calipers Audi 100/A6 C4 Girling/ ATE 57 part number: 4A0615123A / 124A Brake caliper carrier from the 288 brake system part number: 3B0615125 at least 16 inch rims are required This bracket set is only for T3 models with 4WD / Syncro! You can find suitable holders for all rear-wheel drive vehicles in our shop (click here) Scope of delivery: 2 piece brake caliper holder 3 mm spacer plates under the brake disc complete set of high strength bolts for both sides material certificate

€159.70*

BMW E36 M3 Porsche 996 Boxter S Brembo Caliper Adapter 345x28

Brake caliper adapter for front axle of BMW E36 and E36 M3, to install the large Porsche Boxter S 4 piston brake caliper, combined with the BMW E46 M3 CSL brake disc 345x28 mm. Rims of at least 18 inch is required. With this adapter, you can also have 17 inch rims with BMW E46 discs in 325x28, but for this, the brake caliper of the Porsche must be adapted to the contact surface. These adapters are supplied galvanized, therefore, anti-corrosive and top optics! Required components: brake disc: BMW E46 M3 CSL 345x28 mm brake caliper: Porsche Boxter S, reference: left 996.351.425 + right 996.351.426 The brake pad must be slightly chamfered at the upper edge, as there is a slight overhang. It doesn't go any lower for reasons of stability Advantages: high deceleration thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling. Delivery: 2x brake caliper adapters for BMW E36 and E36 M3 high-strength mounting screws material certificate

€196.59*

BMW E39 5 series adapter Brembo E38 caliper with E46 M3 325x28 brake discs

Brake caliper adapters for the front axle of BMW E39 to install the large Brembo 4 piston brake calipers from E38 BMW, combined with the E46 M3 325x28 mm brake discs. The rims must have at least 17 inch.If the original BMW Styling 65 rims (original E39 M5 rims, with 245 / 40 / 18 tires) are used, 25mm track plates must be installed. Advantages: high deceleration rims have 17 inch thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling screws are supplied Required components: brake discs: BMW E46 M3 325x28 mm reference : left 34 11 2 282 801 ; right 34 11 2 282 802 brake calipers: BMW E38 Brembo 4 piston reference : left 34 11 1 163 757 ; right 34 11 1 163 758 brake pads: BMW E38 Brembo 4 piston reference : 34 11 6 761 254 Delivery: 2x brake caliper adapters (see picture) high strength mounting screws material certificate stress analysis

€151.30*

VW Golf 1 Caddy 14D Scirocco brake caliper adapter Porsche 996 brake system Abarth brake brake caliper adapter

Brake caliper adapter for front axle brake system from Golf 1, Golf 1 Cabrio, Caddy 14d, Jetta 1, Scirocco.Allows the installation of brake discs typ Abarth diameter 305x28 mm in combination with Porsche 986 4 Piston brake calipers. Advantages of this braking system: Extreme deceleration values also in connection with our rear axle brake system Brake discs with 4x100mm bolt circle. Therefore, the original Golf 1 bolt circle can be retained. The material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles Directly suitable for the above models and can therefore be restored to the original condition at any time without any problems Our EPYTEC brake caliper adapters do not require your standard parts to be sent in, no re-welding - re-milling or re-drilling Required components: Brake discs Abarth Punto EVO 305x28 Total height 45mm Original part number: 51778054 The hub bore must be widened to 65.00mm (can be done in our house for 59 € for the pair of brake discs click here) Porsche brake calipers from the 996 Porsche original part no.: 996.351.425/426 (only 100% suitable with the specified Porsche calipers) Not approved in the area of the STVO, but the material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles. Minimum rim size: from 16 inch rim. Depending on the rim shape and type, the minimum size of the inner diameter can vary. Delivery: 2x brake caliper adapter VW Golf 1 Caddy Scirocco on Porsche brake system suitable screw set high-strength 1x material certificate Please have a look in our shop for a brake caliper adapter to transform your rear axle brake disc system on ventilated 280mm brake discs in combination with S3 brake calipers (click here)

€192.86*

Porsche S2 944 964 C2/4 968CS M030 brake caliper adapter to 993 Big Red brake system 322x32

Big brake on your Porsche 944 S2, 964 C2/4 and 968CS With these brackets you can install the 993 Biturbo brake (322x32) as well as the original M030 brake on the 944 S2 and 968 We designed the bracket to be used for 2 different brake rotors with different overall heights in conjunction with the 4 piston 993 Biturbo calipers. 1. with the 322x32 mm disc brake discs from the 965 / 928GTS with 77 mm total height, or with 993 Biturbo brake disc 72 mm total height. The holes are set off-center and depending on which brake disc would like to be installed, the holder can simply be turned around so that the disc runs centrally to the 993 caliper. 2. or simply the original M030 brake (304 mm) with the M030 caliper and the M030 brake disc can be installed on the 944 S2 and 968 steering knuckle. Still needed components for corresponding conversion: 322 mm -brake discs 965 right 965 351 046 00 322 mm -brake discs 965 left 965 351 045 00 Brake caliper right 928 351 422 03 M030 brake caliper left 928 351 421 03 Advantages: extreme deceleration values also in combination with our rear axle brake system due to the material certificate included in the scope of delivery, a registration by individual acceptance can also be made possible for series production vehicles directly suitable for the above mentioned models and therefore easily rebuildable to original condition at any time our EPYTEC brake caliper adapters require no sending in of your series parts, no re-welding - re-milling or re-drilling. Scope of delivery: 2x brake caliper adapter for Porsche 944 S2, 964 C2/4 and 968CS without m030 material certificate high strength bolt set Stress analysis for registration

€135.27*

BMW E36 Z3 Performance Brake Caliper Adapter Front

Brake caliper adapter for the front axle of BMW E36/Z3 to install the BMW Performance 6 piston brake caliper, combined with the 345x28mm E46 M3 brake discs.The BMW Performance 6 piston calipers are easily installed on the original axle support in place of the original calipers . Advantages of this brake system: top deceleration, without comparaison with conventional brake discs easy assembly better performance supplied material certificate can easily be restored to the original state Required components: BMW Performance 6 piston brake caliper from 135i reference left 34116786741 + right 34116786742 Brake pads from the BMW 135i part no. 34 11 6 786 044 brake disc from the BMW E46 M3 CSL front axle 345x28mm Delivery: 2x brake caliper adapters for BMW E36 high strength montage screws material certificate stress analysis for registration

€208.06*

VW Syncro T3 BUS 16 Inch Front Axle Audi Ate 57 Brake Caliper Adapter Brake 312x25

Brake caliper adapter on T3 bus Syncro ( 16 inch axle ) for conversion to internally vented 312x25 brake discs, combined with Audi A6 brake caliper. Advantages: top deceleration the system no longer warms up and no more fading very cheap components. You can find second-hand caliper from 49.- € / new from 70.-€ thanks to the material certificate supplied with the order, it is possible to register your purchase quick and easy assembly with the supplied mounting screws Required components: brake discs: 312x25 mm Audi A4 Quattro, Audi A6, e.g. 4B0 615 301 A brake calipers: Audi 100/A6 C4 Girling/ ATE 57 brake caliper mounting brackets from 288th brake system at least 16 inch rims These adapters are designed for the T3 4WD / Syncro and 16-inch axle models. For the rear-wheel drive engines, you will find the corresponding adapters in our shop. Delivery: 2x brake caliper adapters for 16-inch axle 2x spacer plates under the bracke discs, 3 mm high-strength mounting screws material certificate

€257.32*

VW Beetle Caliper Adapter Porsche 944 Floating Caliper Brake Caliper Adapter 282,5x20,5

Brake caliper adapter with special plates including Porsche 5x130 PCD to install floating brake caliper of Porsche 944 onto VW Bettle with drum brake and axle leg (YoC: 1965-1968). Advantages of this brake system: top deceleration, without comparison with conventional brake system Is not authorized under the STVO (German Road Licensing Law) However, thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles easy assembly. Can be easily returned to original state. No welding, milling and drilling Required components: floating brake caliper from Porsche 944 brake discs from Porsche 944 2,7 l 282,5x20,5mm Porsche reference: 944 351 951 02 wheel bearing from VW Bettle, OE: 311 405 625, 311 405 645 For the wheel hubs the grease caps of the Porsche 944 can be used. Shaft sealing ring / Simmerring are taken over from the original Beetle. Scope of delivery: 2x special plates / spacers made of aluminium with Porsche 5x130 PCD 2x brake caliper adapters complete mounting screws set Static stress analysis material certificate

€460.20*

Audi A4 S4 B7 TTRS Audi TTRS Brake Caliper Adapter

Brake caliper adapter, front axle, for Audi A4 S4 to convert to the TTRS brake calipers, combined with the Audi A4 320x30 brake discs. Suitable for the following models: Audi A4 B7 Audi S4 B7 Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: original TTRS , reference left 8J0 615 107 , right 8J0 615 108 brake disc: Audi A4 S4 320x30mm , reference 8E0615301AD brake pads: reference 8J0 698 151 E Delivery: 2x brake caliper adapters high-strength mounting screws material certificate

€249.00*

VW Golf 1 Caddy 14d Jetta Scirocco Brake Caliper Adapter Brake System Golf 4 5 GTI Discs 312x25

Brake caliper adapter, front axle, for the Golf MK1 models to install the caliper of Golf 5 GTI, combined with the disc of Golf 4 GTI 312x25. Suitable for the following vehicles: Golf 1 Golf 1 Cabrio Jetta 1 Caddy 14d Scirocco Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling. Required components: Golf 5 GTI brake calipers , reference: 1K0.615.123.E + 1K0.615.124.E Brake caliper carrier from the VW Golf 5 GTI. Part number: 1K0 615 125 C Brake pad kit , reference: 5K0.698.151 Golf 4 GTI brake discs , reference: 8N0.615.301.A in connection with our 5x100 wheel hubs (article no .: 46729-5) or the brake discs have to be re-drilled (can also be made in-house) Delivery: 2x brake caliper adapters high-strength mounting screws material certificate

€106.42*

BMW E36 M3 Brake Caliper Adapter Front Axle Porsche 996 Brake System Brake 345x28

Brake caliper adapter on front axle of BMW E36 M3 for conversion to brake caliper from Porsche 996, combied with the 345x28mm E46 M3 brake dics. Thanks to our adapters, the Porsche calipers are easily installed on the original axle support in place of the original calipers. Advantages of this brake system: top deceleration, without comparison with conventional brake discs easy assembly better performance supplied material certificate can easily be restored to the original state Required components: brake caliper: Porsche 996 (rear axle) reference 996.352.425 + 996.352.426 brake disc: BMW E46 M3 (front axle) 345x28mm Delivery: 2x brake caliper adapters for BMW E36 M3 high-strength mounting screws material certificate Notes/tips: For a better ventilation of the brake system, we recommend removing the dust cover plates and brake anchor plate. For brake conversion on the rear axle, we recommend that you generally proceed as follows: install the adapter with the necessary components and then check if new brake lines are required. Because, depending on the vehicle, the lines may be too short or the line tips may not suitable. We advise you to change to steel braided brake line because of the quality and technical advantage. Specifically for this, we have developed an online brake line configurator, where you can assemble the type of steel braided brake lines you want. Click here to go to the configurator >> Stahlflex-Bremsleitung konfigurieren << always use the hand brake cable of the installed brake caliper. So sometimes you have to modify / adapt the new handbrake cable. For conversions, where the original caliper is used and the handbrake cable can be used, you may need to pull the cable without any other fittings (ie directly) to compensate for the long distance due to the large diameter of the large brake discs.

€312.12*

Brake Caliper Adapter BMW E30 to E34 540i Brake Disc E36 M3 315x28

Brake caliper adapter for front axle of BMW E30 with BMW E36 or E46 wheel hub to install the 315x28 brake discs from E36 M3.Brake caliper from BMW E36 M3 are required, combined with brake caliper bracket of E34 540i. Required components: brake caliper: BMW E36 M3 brake caliper mouting bracket / support: BMW E34 540i brake disc: BMW E36 M3 315x28mm original reference: 34112227171 conversion kit to convert to 5 holes hub (item number 126 in our shop ) Advantages: high deceleration thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling. Delivery: 2x brake caliper adapters (see picture) 2x spacer plates 12mm high-strength mounting screws copy of a vehicle document to simplify the registration material certificate rims: at least 17 inch

€223.63*

Bremssattel Adapter Audi A5 TTRS RS3 Audi TT Bremsanlage Bremssattel Adapter 370x32

Bremssattel Adapter für die Audi A5 Baureihe auf die TTRS Bremssättel in Verbindung mit den original TTRS Bremsscheiben. Die Adapter passen für folgende Fahrzeuge : Audi A5 Vorteile dieser Bremsanlage: durch das im Lieferumfang enthaltene Materialzertifikat kann eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werden Direkt passend an die oben genannten Modelle und daher jederzeit problemlos wieder in den Originalzustand rückrüstbar Unsere EPYTEC Bremssattel Adapter erfordern keine Einsendung von euren Serienteilen, kein umschweißen, umfräsen oder umbohren. Benötigte Komponenten: Original TTRS Bremssättel Bremssattel links Teile Nr: 8J0 615 107 Bremssattel rechts Teile Nr: 8J0 615 108 Satz Bremsbeläge Teile Nr: 8J0 698 151 E Bremsscheiben vom TTRS 370x32 mm Teilenummer 8J0615301F (RS3 Scheiben passen nicht, andere Topftiefe) Bremsscheibenzentrierung von 65mm auf 68mm aufdrehen. Lieferumfang: 2x Bremssattel Adapter Materialzertifikat

€269.00*

Chrysler 300C brake system brake caliper adapter Audi RS6 brake 360x32

Brake caliper adapter on front axle of Chrysler 300c for conversion to the large 8 piston brake calipers, combined with the 360x32mm Chrysler 300c brake discs. Advantages: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake calipers: VW Phaeton 5.0 V10 W12 8 piston , Brembo reference 20.7675.02 brake discs: Chrysler 300c 360x32mm , reference 5290537 brake pads: Audi , reference 8e0698151h / Brembo reference p85078 Delivery: 2x brake caliper adapters (see picture) Set of high-strength screw material material certificate

€311.34*

Brake Caliper Adapter Audi S6 Porsche 993 Brake Caliper Audi S4 320x30mm Brake Disc

Brake caliper adapter on Audi S6 C4 model for conversion to Porsche 993 brake calipers, combined with the Audi S4 B5 320x30mm brake discs. Suitable for the following vehicles: Audi S6 C4 A reference number and the EPYTEC logo is engraved on our caliper adapters. Thus, it is possible to register your purchase even for series vehicles, according §21 i.V.m. § 19/2 StVZO (German Road License Legislation). Advantages high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake calipers: Porsche 993 turbo , reference 993 351 426 , Brembo reference 20.5249.00 brake discs: Audi S4 B5 320x30mm , reference 8E0615301AE brake pads: original 993 turbo Delivery: 2x brake caliper adapters for Audi S6 C4 high strength mounting screws material certificate Notes/tips: For a better ventilation of the brake system, we recommend removing the dust cover plates and brake anchor plate. For brake conversion on the rear axle, we recommend that you generally proceed as follows: install the adapter with the necessary components and then check if new brake lines are required. Because, depending on the vehicle, the lines may be too short or the line tips may not suitable. We advise you to change to steel braided brake line because of the quality and technical advantage. Specifically for this, we have developed an online brake line configurator, where you can assemble the type of steel braided brake lines you want. Click here to go to the configurator >> Stahlflex-Bremsleitung konfigurieren << always use the hand brake cable of the installed brake caliper. So sometimes you have to modify / adapt the new handbrake cable. For conversions, where the original caliper is used and the handbrake cable can be used, you may need to pull the cable without any other fittings (ie directly) to compensate for the long distance due to the large diameter of the large brake discs.

€320.49*

Big Red Porsche 944 S2 924 928 968 / 996Turbo Adapter Brake Caliper Adapter Brake Caliper Adapter

1 pair of new Big Red caliper adapters for conversion from Porsche 944 S2 924 928 968 to the big brake system of the Porsche 996 Turbo. With this adapter, the complete brake system of the above models can be adopted plug & play. Important: The adapters fit only to the steering knuckle with hole size 94mm. For steering knuckles with hole size 76mm we also have suitable adapters in the program. (click here) Technical data of the brake system: Porsche brake caliper part number: 996.351.429 / 996.351.430 (Only 100% suitable with the specified Porsche calipers) Brake discs: 330 x 34 mm Brake disc left VA Porsche reference number: 996 351 409 02, 996 351 409 03, 996 351 409 04 Brake disc right VA Porsche reference number: 996 351 410 02, 996 351 410 03, 996 351 410 04 Brake pad set VA Porsche reference number: 99635194910, 99635194911, 99635194912, 99735194902 Brake caliper holder are made of high strength steel alloy including material certificate. Advantages: Extreme deceleration values also in conjunction with our rear axle brake system. Due to the material certificate included in the scope of delivery, a registration by individual acceptance can also be enabled for series vehicles Directly suitable for the above mentioned models and therefore easily rebuildable to the original condition at any time. Our EPYTEC brake caliper adapters require no sending in of their series parts, no re-welding - re-milling or re-drilling. Scope of delivery: 2x holder (see picture) Material certificate Screw set high strength Stress analysis for easier registration We also have suitable saddle holders for the 964 and 911 in our program.

€252.92*

Big Red Porsche Brake Adapter Brake caliper adapter 964 911 993 996 Turbo Gt3 Caliper conversion on front axle

New Big Red Brake caliper adapter for Porsche conversion 964 911 993 on the large brake system of the Porsche 996 Turbo GT2 GT3.With these adapters, the complete brake system of the above models can be used plug & play. Required material for installation: Brake calipers no.: 996.351.429.10 + 996.351.430.10 (a successful conversion is only possibile with the before mentioned pieces!!!) Brake discs from 996 Turbo 330 x 34 mm no.: 996 351 409 02 + 996 351 410 02 Brake caliper holders are made of high-strength steel alloy including material certificate. Advantages: Extreme deceleration values also in connection with our rear axle brake system The material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles Directly suitable for the above models and can therefore be restored to the original condition at any time without any problems Our EPYTEC brake caliper adapters do not require your standard parts to be sent in, no re-welding - re-milling or re-drilling Scope of delivery: 2 x adapter (see photo) certificate of material complete screw set (10.9) To transform the brake disc system of Porsche 944, S2 , 924, 928 and 968 have please a look at our product range.

€178.52*

VW T3 BUS Front axle brake adapterAudi Ate 57 Brake disc transformation 312x25mm Brake caliper adapter

Brake caliper adapter to convert the T3 BUS to ventilated 312x25 brake discs with Audi A6 calipersAn independent conversion description from one of our customers can be found here: https://schrauberlaube.de/'page_id=25899 Advantages of this brake system: Top deceleration values no more overheating and fading of the brakes Very cheap procurement of the components brake calipers used from 49.- € new brake discs from 70.- € The material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles Quick and easy assembly possible with the supplied wheel hubs and screws! The wheel hubs supplied retain the standard VW bolt pattern and are identical to the original dimensions. This means that the wheel bearings can continue to be used and the track is only 6 mm wider on each side. Required material for installation: Brake discs 312x25 mm Audi A4 quattro, Audi A6 e.g. 4B0 615 301 A Brake calipers Audi 100 / A6 C4 Girling / ATE 57 Part No: 4A0615123A / 4A0615124A (left, right) Brake caliper brackets that were installed with the 288 brake system.(are required because of the shorter design of the holder Part number: 3B0615125 At least 16 inch rims should be used Advice: This adapter is for all T3 buses built after 1986. Yours before 1986 require the >> adapter with article no. 466 << Scope of delivery: 2 high resistant adapter-plates 2x matching centering rings Certificate of material Complete set of high resistant srews 2x wheel hub for installation on front axle. Copy of the german document 'Fahrzeugschein' (equivalent with the English vehicle registration card). Proves the conformity of our product in Germany and simplifies authorization by authorities. stress analysis You can find installation instructions from a customer here: https://schrauberlaube.de/'page_id=25899 Here is an installation video from our customer, the steering knuckle is lightly machined as it is built before 1986, nothing needs to be machined on steering knuckles built after 1986, and a different brake caliper is used, hence the light machining:

€252.13*

Brake Caliper Adapter VW T3 Bus Conversion Porsche Brake System

Brake caliper adapter, VW T3 Bus to convert to front 4-piston Porsche Boxter brake caliper, combined with the 312x28mm Mercedes brake disc. Our adapter kit works with or without ABS. Furthermore, the price-performance ratio of the Porsche calipers, as well as the Mercedes discs (the pair allready from 130 € from Zimmerman) is right. Required components: special wheel hubs, front axle (EPYTEC item number 341). A complete kit is available in our shop, item number 276 rims: at least 16 inch brake caliper: Porsche Boxter , reference 996.351.426 + 996.351.425 (only 100% suitable for the mentioned Porsche calipers) brake disc: Mercedes S-Klasse 312x28 , reference 220 421 09 12 rims: at least 16 inch Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Delivery: 2x brake caliper adapters (see pictures) high-strength mounting screws material certificate Stress analysis / FEM calculation for entry

€174.89*

VW T3 4-wheel Syncro BUS conversion to Porsche brake caliper adapter brake system brake caliper adapter

Brake caliper adapter for front axle brake system for T3 14 Zoll Syncro to fix brake discs typ Audi A4 A6 diameter 288x25mm in combination with Porsche 996 4 Piston brake calipers. The advantages of this brake system are the perfect deceleration values. Furthermore, the price-performance ratio of the Porsche brake calipers and the brake discs is right. Required components: rear Porsche 996 brake calipers Porsche part number 996.352.421 + 996.352.422 (Only 100% suitable with the specified Porsche calipers) Brake discs Audi A6 A4 288x25 OE numbers: 4A0 615 301 C (VAG), 4A0 615 301 D (VAG), 4A0 615 301 E (VAG), 8E0 615 301 Q (VAG) other comparison numbers: V10-80049 (VAICO ), 100.1216.20 (ZIMMERMANN), 100.1216.70 (ZIMMERMANN) This brake disc system allows the installation of 15” wheel rims.Click here for the matching adapter for the 16 inch axle article 1143 (click here) Advantages: The remaining fading on the original brake system is gone. Significantly better perfomance than the standard brake system. Our adaptors do require only small rectifications on your vehicle.Therefore easily transformable in its original condition The registration for public road use should be no problem with correct and complete execution of the work. Scope of delivery: 2 brake adapter (see photo) Certificate of material (Proves the conformity of our product in Germany and simplifies authorization by authorities) High resistant screws for fixation Stress analysis

€174.68*

Audi S2 80 90 Brake Caliper Adapter Big Red 993 Brake Calipers 323x30 Audi A8 Brake Disc Tuning Adapter

Brake caliper adapter to mount the Porsche Big Red 993 calipers in conjunction with the large brake discs in 323x30 from the Audi A8 on the Audi S2, Audi 80 / 90, with original 5 x112 or 5x112 bolt circle conversions.The standard Audi bolt circle can be retained. Thus, the complex and costly 5x130 mm Porsche bolt circle conversion is not required. Furthermore, 16 inch rims can be driven with this brake system Required components: Porsche 993 Big Red Brake Calipers Part No: 993.351.425 / 993.351.426 Brake pads part number: 92835194002 Brake discs from Audi A8 in 323x30 OE numbers: 4D0 615 301A Wheel hub from Audi S2 with 5x112 must be installed (also available in our store. Part number: APA185 click here) Important: Our brake caliper adapters only fit with the specified components, please be sure to use them exactly. Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling quick and easy assembly anticorrosiv according to DIN ISO 9227 Delivery: 2x brake caliper adapters (see pictures) suitable high-strength screw set material certificate copy of vehicle documents to simplify the registration Stress analysis / FEM calculation for entry

€184.44*

Brake Caliper Adapter Audi 200 20v S4 for Porsche 993 Biturbo Brake System

1 pair of high strength caliper adapters for the front axle to mount the Porsche Turbo or the identical large RS2 calipers (also called The Big Red) on the Audi S4 c4 and Audi 200 Turbo 20v. Fits all models that were equipped with the undersized and vulnerable so-called UFO brake. Hole spacing on the brake caliper mounting: 130mm.With our adapters you can combine the Porsche brake calipers with the 323x30 discs from the Audi A6 A8 and S8. This has the following advantages for you: The AUDI bolt circle of 5x112 mm can be retained. therefore no costly Porsche bolt circle conversion. Cost-effective brake discs, you get the pair already for about 150€. Deceleration values similar to Porsche Turbo Only small adjustments to strut and hub nötwendig Problemos again in original condition Rückrüstbar Double the service life compared to the original brake system Brackets are made of high strength steel alloy (Including material certificate) Adapters are delivered galvanized, best corrosion protection according to DIN ISO 9227 By the material certificate included in the scope of supply a registration can be made possible by individual acceptance also with series vehicles Required components: Brake discs part number: 4D0 615 301 J, 4D0 615 301F Brake caliper part number: 993.351.425.10 / 993.351.426.10 (Only 100% suitable with the specified Porsche calipers) Scope of delivery: 2 high strength brake caliper holders for the UFO strut. Material certificate Installation cable

€304.46*

BMW Z1 E30 Brake Caliper Adapter E34 540i Brake Discs 312x25

Brake caliper adapter on front axle from BMW E30 for conversion to the large brake system from BMW E34 540i, combined with Audi S3 brake discs 312 x 25mm. Required components: brake calipers: BMW E34 540i with support / bracket and brake pads brake discs: Audi S3 (8L) / Golf 4 GTI 312x25mm reference 8N0 615 301 A brake disc PCD habe to be modified to 4x100 (service available from EPYTEC Advantages of this brake system: high deceleration thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Delivery: 2x brake caliper adapters (see picture) high-strength screw set material certificate Rims: at least 17 inch.

€159.75*

BMW E36 E46 Porsche 996 Boxter S Brake Caliper Adapter 345x28 Brake Disc

Brake caliper adapter on front axle of BMW E36 (all models except M3) for the conversion to the large Porsche Boxter S 4 piston brake calipers, combined with the BMW E46 M3 CSL 345x28 mm brake discs. Rims of at least 18 inch is required. With this adapter, you can also have 17 inch rims with BMW E46 discs in 325x28, but for this, the brake caliper of the Porsche must be adapted to the contact surface. Required components: brake caliper: Porsche Boxter S, reference left 996.351.425 + right 996.351.426 brake disc: BMW E46 M3 CSL 345x28 mm The brake pad must be slightly chamfered at the upper edge, as there is a slight overhang. It doesn't go any lower for reasons of stability Advantages: high deceleration thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling. mounting screws are supplied Delivery: 2x brake caliper adapters (see picture) high-strength mounting screws material certificate Installation instructions

€141.59*

VW T3 BUS Caliper Adapter Brake Caliper Audi Ate 57 288x25 15-inch Brake System

We finally designed a brake caliper adapter that be installed on the T3 2WD bus (not Syncro) under the 15-inch rims. The adapters are mounted with 288x25 mm internally vented brake discs and with the Audi A6 calipers. Advantages: top deceleration system no longer warms up and no more fading very cheap components. you can find second-hand caliper from 49.- € / new from 70.-€ thanks to the material certificate supplied with the order, it is possible to register your purchase possible quick and easy assembly with the supplied mounting screws Required components: brake discs 288x25 mm Audi A4 Quattro, Audi A6 z.B. OE-number:4A0 615 301 C (VAG), 4A0 615 301 D (VAG), 4A0 615 301 E (VAG), 8E0 615 301 Q (VAG) other comparaison number:V10-80049 (VAICO), 100.1216.20 (ZIMMERMANN), 100.1216.70 (ZIMMERMANN) bracke calipers Audi 100/A6 C4 Girling/ ATE 57 reference : 4A0615123A/4A0615124A (left, right) brake caliper brackets required for mounting the 288th brake system. Part No.:4A0615125A(required because of the shorter shape of these brackets) Brake Pads Original Parts NR VW 4A0698151A (We also have matching ones from EBC in our assortment (see accessories on this page below) Only suitable with the 14 inch axle of T3 (you can see it with the screws fixing the calipers. The thread should be 16 mm) Because of the thickness of the brake discs, the track is widened by 7mm for each side. Important!!! So that you can bleed the brake system cleanly, we recommend to mount the brake calipers reversed, i.e. to mount the left brake caliper on the right vehicle side and the right brake caliper on the left vehicle side. Delivery: adapter system for brake caliper complete set of high-strength screws for both sides hub centric rings for the discs matching wheel hubs material certificate stress analysis

€251.60*

VW T3 Bus Brake Caliper Adapter Caliper Audi Ate 57 288x25 15-inch Brake System

We finally designed a brake caliper adapter that be installed on the T3 2WD bus (not Syncro) under the 15-inch rims. The adapters are mounted with 288x25 mm internally vented brake discs and with the Audi A6 calipers. Advantages: top deceleration the system no longer warms up and no more fading very cheap components. you can find second-hand caliper from 49.- € / new from 70.-€ thanks to the material certificate supplied with the order, it is possible to register your purchase quick and easy assembly with the supplied mounting screws Required components: Brake discs 288x25 mm Audi A4 Quattro, Audi A6 z.B. OE-number:4A0 615 301 C (VAG), 4A0 615 301 D (VAG), 4A0 615 301 E (VAG), 8E0 615 301 Q (VAG) other comparaison numbers :V10-80049 (VAICO), 100.1216.20 (ZIMMERMANN), 100.1216.70 (ZIMMERMANN) bracke calipers Audi 100/A6 C4 Girling/ ATE 57 reference : 4A0615123A/4A0615124A (left, right) Brake caliper brackets required for installing the brake system 288.Part No.4A0615125A (required because of the shorter form of these brackets) Hubs that are also available in our shop, item number 341. A complete kit including hub is also available in our shop, number 657 Only suitable with the 15 inch axle of T3 (you can see it with the screws fixing the calipers. The thread should be 16 mm) Because of the thickness of the brake discs, the track is widened by 7mm for each side. Important!!!So that you can bleed the brake system cleanly, we recommend to mount the brake calipers reversed, i.e. to mount the left brake caliper on the right vehicle side and the right brake caliper on the left vehicle side. Delivery: 1x adapter system for brake caliper 1x complete set of high strength screws for both sides 2x hub centric rings for the discs material certificate

€147.71*

Audi S4 b6 b7 8H Brake Caliper Adapter Caliper Mounting Bracket TTRS RS3 370x32

Brake caliper adapter, front axle, for Audi A4 and S4 b7 to install the calipers TTRS , combined with the original TTRS brake discs 370x32. Suitable for the following vehicles: Audi S4 B7 Audi A4 B7 Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: original TTRS brake calipers. reference left : 8J0 615 107. reference right : 8J0 615 108 brake pads, reference : 8J0 698 151 E brake discs Audi TT RS 370x32mm reference 8J0 615 301F Hub bore must be turned from 65mm to 68mm. (also possible in our house, click here) Delivery: 2x brake caliper adapters for Audi S4 B7 high strength mounting screws copy of the vehicle document to simplify the registration material certificate

€433.44*

BMW E36 M3 Performance Brake Caliper Adapter Front Brake System 345x28

Brake caliper adapters for the front axle of BMW E36 M3 to install the 6 piston BMW Performance brake calipers, combined with the 345x28mm E46 M3 brake discs. Thanks to our adapter, the 6 piston BMW Performance brake calipers are simply screwed to the original axle instead of the original caliper. Advantages of this brake system: top deceleration, without comparison with conventional brake discs easy assembly better performance supplied material certificate can easily be restored to the original state Required components: brake caliper: BMW Performance 6 piston from 135i , reference: left 34116786741 ; right 3411678674 Brake pads from the BMW 135i Part No. 34 11 6 786 044 bracke disc: BMW E46 M3 CSL front axle 345x28mm Delivery: 2x brake caliper adapters for BMW E36 M3 high strength mounting screws material certificate

€172.12*

Audi S2 80 90 RS2 Brake Caliper Adapter 345x30 S8 Brake Disc Brake System

Brake caliper adapter for front axle on Audi S2 Audi 80/90 with original 5x112 or 5x112 bolt circle conversions, for conversion to brake caliper of Audi RS2, combined with the brake discs of Audi S8 345x30. Suitable for the following vehicles: Audi S2 Audi 80 Audi 90 Advantages: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: Audi RS2 reference 8A0 615 106 k brake disc: Audi S8 345x30mm reference 4D0 615 301 B Scope of Delivery: 2x brake caliper adapters for Audi 80, 90, S2 ect material certificate

€448.21*

Brake Caliper Adapter Porsche 911 964 996 GT3 Brake System GT3 Brake Disc 350x34

Brake caliper adapter on Porsche 911 964 for conversion to 996 GT3 brake calipers, combined with Porsche GT3 brake discs 350x34 mm Suitable for the following vehicles: Porsche 911 Porsche 964 Advantages: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: original Porsche GT3 brake disc: Porsche GT3 350x34 mm Delivery: 2x brake caliper adapters high strength mounting screws material certificate

€279.00*

VW T4 Bus Audi TT TTRS RS3 Audi TT Brake Caliper Adapter 345x30 Brake Disc

Brake caliper adapter, front axle, for VW T4 bus, to convert to TTRS brake calipers, combined with the Golf 5 R32 brake discs. Suitable for the following model: VW T4 Bus Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: original TTRS , reference left 8J0 615 107 , right 8J0 615 108 brake disc: Golf MK5 R32 345x30mm , reference J0615301F ( brake pads: reference 8J0 698 151 bore hole of brakce disc muss be modified to Ø=68mm minimal hub Ø=139mm . Delivery: 2x brake caliper adapters for VW T4 Bus. Conversion to TTRS high-strength mounting screws material certificate

€204.15*

Bremssattel Adapter Audi A4 S4 C6 TTRS Bremssättel TTRS Bremsscheiben 370x32.

Bremssattel Adapter für den Audi S4 C6 auf die TTRS Bremssättel in Verbindung mit den TTRS Bremsscheiben 370x32. Die Adapter passen für folgende Fahrzeuge : Audi S4 C6 Audi A4 C6 Vorteile dieser Bremsanlage: extreme Verzögerungswerte auch in Verbindung mit unserer Hinterachsbremsanlage durch das im Lieferumfang enthaltene Materialzertifikat kann eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werden direkt passend an die oben genannten Modelle und daher jederzeit problemlos wieder in den Originalzustand rückrüstbar unsere EPYTEC Bremssattel Adapter erfordern keine Einsendung von Euren Serienteilen, kein Umschweißen, Umfräsen oder Umbohren. Benötigte Komponenten: Original TTRS Bremssättel Bremssattel links Teile Nr: 8J0 615 107 Bremssattel rechts Teile Nr: 8J0 615 108 Satz Bremsbeläge Teile Nr: 8J0 698 151 E Bremsscheiben vom TTRS 370x32 mm Teilenummer 8J0615301F (RS3 Scheiben passen nicht, andere Topftiefe) Die Nabenbohrung der Bremsscheibe muss auf 68mm augedreht werden. ( auch bei uns im Haus machbar ) Lieferumfang: 2x Bremssatteladapter für den Audi A4 S4 C6 Materialzertifikat KFZ Schein mit Eintragung es sollten mindesten 18 Zoll Felgen gefahren werden.

€269.00*

Audi A4 A6 Passat 3BG Skoda Audi TT Brake Caliper Adapter 370x32 Brake Disc TTRS Bremssattel

Brake caliper adapter, front axle, for Passat 3BG serie to convert to the TTRS brake calipers, combined with the original TTRS brake discs Suitable for the following models: Passat ( 3B2 3BG ) Audi A4 (8D2 B5 ) Audi A6 ( 4B C5 ) Skoda Superb ( 3u4 ) As the TTRS disc could touch the wishbone because of its high height, we have developed spacers of 8mm thickness, which are mounted under the brake disc. The discs are thus pushed outwards. In addition, the disc with the plate is perfectly centered on the axle stub. The spacers are naturally contained in the delivery. Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: original TTRS , reference left 8J0 615 107 , reference right 8J0 615 108 brake disque: TTRS 370x32, reference 8J0615301F (RS3 dics are not suitable) brake pads: reference 8J0 698 151 E Delivery: 2x brake caliper adapters 2x spacers under discs copy of vehicle documents material certificate

€251.37*

Opel Omega Porsche Brake Caliper Adapter Brake Audi A8 Brake Disc Front Axle

Brake caliper adapter, front axle, on models e.g. Opel Omega B, for conversion to the brake discs 323 x 30mm from Audi A8, combined with the Porsche Boxster S and 996 brake calipers (996.351.425 or 426). Can be used without modifications on all Opels with a standard 5x110mm bolt / pitch circle such as Omega A B.Otherwise with wheel hub conversion to 5x110 bolt / ptich circle on all Opel models e.g. Astra, Calibra, Kadett & Vectra can be mounted directly on the suspension strut. Required components: brake caliper: Porsche Boxter S, reference left 996.351.425 right 996.351.426 brake disc: Audi A8 323x30mm, reference 3D0 615 301 G hub diameter of the brake discs can be modified from 68mm to 70mm (can also be done by EPYTEC) Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Delivery: 2x brake caliper adapters for Opel Omega with Audi A8 brake discs and Porsche 996 brake calipers material certificate

€279.99*

Brake Caliper Adapter T2 YoC 77 to Audi A6 Brake System

Brake caliper adapter, front axle, on T2 bus model for conversion to internally vented brake discs 312x25mm, combined with Audi A6 brake caliper. Advantages: top deceleration the system no longer warms up and no more fading quick and easy assembly with the supplied mounting screws Required components: brake caliper: Audi A6 ATE 974 + 973 , reference 4F0615124 brake disc: Audi A6 312x25 mm , reference 3B0 615 301 B T2 Lowering of steering knuckles Delivery: 2x brake caliper adapters high strength montage screws material certificate Rims: at least 16 inch.

€346.34*

BMW E46 M3 Brake Caliper Adapter Porsche 996 E46 M3 CSL 345x28 Brake Disc

Brake caliper adapter , front axle, on models BMW E46 M3 for conveersion to the large BMW E46 M3 CSL brake discs, 345x28 mm, combined with brake caliper from Porsche 996. Suitable for all M3 E46 models, without modifications. This brake system can also be fitted to all other E46 models. Only important is the conversion on axle pin / stub or wheel hub from M3 E46. Advantages of this brake system: high deceleration thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: Porsche 996, reference 996.351.425 + 996.351.426 brake disc: BMW E46 M3 CSL 345x28mm (front axle) , reference 34 11 2 282 445 The brake caliper must be milled off approx. 5.5mm on the contact surface. Rinms: at least 19 inch. Delivery: 2x brake caliper adapters for BMW E46 M3 high-strength mounting screws material certificate

€176.92*

Renault Clio 3 4 Modus Captur Kangoo Dacia Dokker Logan Bremsanlage Bremssattel Adapter 300x24

Bremssattel Adapter für die Renault und Dacia Baureihe auf die Renault Clio RS / Megan RS Bremssättel in Verbindung mit den original Renault Scenic 2 Bremsscheiben 300x24. Die Adapter passen für folgende Fahrzeuge: Renault: Clio 3 Clio 4 Modus Captur Kangoo 2 ( 4-Loch ) Zoe Dacia: Dokker Lodgy Sandero Logan Vorteile dieser Bremsanlage: Durch das im Lieferumfang enthaltene Materialzertifikat kann eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werden Direkt passend an die oben genannten Modelle und daher jederzeit problemlos wieder in den Originalzustand rückrüstbar Unsere EPYTEC Bremssattel Adapter erfordern keine Einsendung von euren Serienteilen, kein umschweißen, umfräsen oder umbohren. Benötigte Komponenten: Bremssättel vom Clio 3 RS Bremssattel links Teile Nr: 7701066288 Bremssattel rechts Teile Nr: 7701066289 Bremsscheiben vom Renault Scenic 2 300x24 mm Teilenummer 7701207897 Um den Adapter am Achschenkel zu besfestigen können die original Scharauben verwendet werden Lieferumfang: 2x Bremssattel Adapter hochfeste Montageschrauben Materialzertifikat

€269.00*

Brake Caliper Adapter BMW Performance E46 M3 Facelift Front Axle

Brake caliper adapter for the front axle of BMW E46 M3 Facelift to install the BMW Performance 6 piston brake caliper, combined with the 345x28mm E46 M3 CSL brake discs.Thanks to our adapters, the BMW Performance 6 piston calipers are easily installed on the original axle support in place of the original calipers. Advantages of this brake system top deceleration, without comparison with conventional brake discs easy assembly better performance supplied material certificate can easily be restored to the original state Required components: brake caliper: BMW Performance 6-piston 135i , reference 34 11 6 786 741 Brake pads from the BMW 135i Part No. 34 11 6 786 044 brake disc: BMW E46 M3 CSL (front axle) 345x28mm Delivery: 2x brake caliper adapters for BMW E46 M3 Facelift Set of high strength bolts material certificate Stress analysis / FEM calculation from the adapter

€189.70*

Brake Caliper Adapter Volvo 850 T5 850 T5R 4-piston Brake Caliper Alfa Romeo Brake Disc XC90

Brake caliper adapter for all: Volvo 850 T5, 850 T5R and V70 up to year of manufacture 2000 in connection with the Alfa Romeo 159 / Brera / Spider 4-piston Brembo calipers and the Volvo XC90 336x30 brake discs. Advantages of this brake system: thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling the original brake lines can be retained. Required components: brake caliper:l Alfa Romeo 4-piston Brembo, reference 07E121162 / 07E111260 / 77363537 / 77364508 / 77364510 brake pad: Alfa Romeo, reference 77364900 / 77365202 brake disc: Volvo XC90 336x30 , reference 30657301 Delivery: 2x brake caliper adapters for Volvo 850 T5, 850 T5R and V70 up to year of manufacture 2000 suitable high-strength screw set material certificate At least 17 inch rims must be used.

€210.71*

BMW E46 Brake Caliper Adapter Porsche Cayenne Rear Brake Caliper E46 M3 CSL 345x28 Brake Disc

Brake caliper adapter on BMW E46, front axle, for conversion to BMW E46 M3 CSL brake discs (345x28mm), combined with the rear brake calipers from Porsche Cayenne. Suitable for all E46 models without modifications. Advantages of this brake system: high deceleration thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components:: brake caliper: Porsche Cayenne rear , reference ( stands on the calipers, rear number distinguishes right and left caliper) 955.352.421 + 955.352.422 (only 100% compatible with the specified Porsche calipers) / Brembo left: 20.7673.03 , right 20.7673.04 brake disc: BMW E46 M3 CSL 345x28mm , front axle, reference 34 11 2 282 445 Rims: at least 17 inch Delivery: 2x brake caliper adapters for BMW E46 M3 high strength mounting screws material certificate

€241.02*

Brake Caliper Adapter BMW E30 to E36 M3 Brake Disc 315x28 Brake E38 Brake Caliper

Brake caliper adapter, front axle, for BMW E30 with BMW E36 E46 wheel hub, for conversion to 315x28 E36 M3 brake discs, combined with the brake calipers and brake caliper mounting brackets from BMW E38. Required components:: brake caliper and brake caliper mounting bracket: BMW E38 , reference: left 34111163757, right 34111163758 brake disc: BMW E36 M3 315x28mm , reference 34112227171, 34112227737 conversion kit to 5-hole wheel hub (item n° 126 in our shop;) Advantages of this brake system: high deceleration thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Delivery: 2x brake caliper adapters (see picture) 2x spacers under discs high-strength mounting screws material certificate Rims: at least 17 inch

€214.12*

Brake Caliper Adapter T2 YoC 77 Porsche 996 Boxter Caliper Audi A6 Brake Disc

Brake caliper adapter on model T2 bus transporter, front axle, for conversion to internallly vented 312x25mm brake discs, combined with the Porsche Boxter brake calipers. Advantages: top deceleration the system no longer warms up and no more fading thanks to the material certificate supplied with the order, it is possible to register your purchase quick and easy assembly with the supplied mounting screws Required components: brake disc: Audi A6 312x25 , reference 3B0 615 301 B brake caliper: Porsche Boxter, reference 996.352.421 + 996.352.422 Delivery: 2x brake caliper adapters high strength mounting screws Rims: at least 17 inch.

€318.58*

VW Golf MK4 Audi A3 TT Seat Rim Centric Ring Extension Bush Spacer Brake Conversion

VW Golf MK4 Audi A3 TT Seat Rim Centric Ring / Extension Bush. Ideal and definitely recommended for combination with our brake conversion. Often there is almost no space on the wheel hub to center the rim. Or you still need spacing plates / spacers so that the rim comes out further. This bushing / rim centering extension is simply placed on the front of the wheel hub and you instantly have 10mm more available. Delivery: 1x rim centric ring / extension bush, high-strength steel, for VW Golf MK4 Polo 9N Bora Audi A3 TT

€13.88*

5mm Spacing Plate / Bush / Bushing for and under Brake Caliper Adapter

5mm spacing plate / bush / bushing for brake system. This comes under and between the 4 oder 6-piston brake caliper and srew fixation point.The plates are made of stainless steel!! Delivery: 1x spacing plate / bush / bushing for brake caliper adapter, height 5mm, stainless steel

€13.78*

Brake Caliper Adapter Golf MK1 G60 Brake Disc Porsche 986 Brake Caliper

Brake caliper adapter, front axle, for Golf MK1 serie to convert to 4-piston Porsche Boxter 986 brake calipers rear axle, combined with the 280mm G60 brake discs. Suitable for following vehicles: VW Golf MK1 VW Golf MK1 Cabrio Caddy 14d Jeta 1 Scirocco Polo g40 Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system 15 inch rims is possible brake disc with 4x100 PCD. Therefore, the original Golf MK1 PCD can be maintained. thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: 986 Porsche Boxter , reference 986.352.421 / 422 (only 100% suitable for the mentioned Porsche calipers) brake disc: VW Golf MK2 / MK3 G60 280x22 , reference: 6KL 615 301 Delivery: 2x brake caliper adapters for VW Golf MK1 Caddy Scirocco to Porsche brake system high-strength mounting screws material certificate

€306.23*

Brake Caliper Adapter Golf MK1 Rear Axle to 310x22 Phaeton Golf MK4 R32 Caliper - Hub 5 Holes

Radnaben Lochkreis: 5x100

Brake caliper adapter, rear axle, for the mentioned below models to install the Phaeton brake dics 310x22 mm, combined with the original R32 / S3 caliper Suitable for the following vehicles (front WD only): VW Golf MK1 VW Gol MK1 Cabrio Caddy 14d Jetta 1 Golf 2 3 + GTI+ VR6 Corrado Jetta Passat 35i Scirrocco Vento Polo 6N1 Seat Cordoba Seat Ibiza Seat Toledo Advantages of this brake system: High deceleration Thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles Directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling. Required components: internally vented brake discs 335x22 of VW Phaeton, reference: 3D0 615 601 D (the 5x112 PCD must be modified to 4x100 or 5x100, what we can do ourselves in our workshops) brake caliper: VW Golf R32 V6 oder S3 , VW reference left 8N0615423C + right 8N0615424C brake caliper mounting bracket: reference 8N0615425B The adapters are delivered black galvanized, therefore best rust protection and great look! Delivery: 2x brake caliper adapters VW Golf MK1 MK2 MK3 Caddy Scirocco Jetta VR6, etc 2x axle stubs, left and right 2x wheel hubs 5x100 2x suitable centric rings complete screw kit (10.9) material certificate

Variants from €286.48*

€303.40*

Brake Caliper Adapter Golf MK1 Rear Axle to 310x22 Phaeton Golf MK4 R32 Caliper - Hub 4 Holes

Radnaben Lochkreis: 4x100

Brake caliper adapter, rear axle, for the mentioned below models to install the Phaeton brake dics 310x22 mm, combined with the original R32 / S3 caliper Suitable for the following vehicles (front WD only): VW Golf MK1 VW Gol MK1 Cabrio Caddy 14d Jetta 1 Golf 2 3 + GTI+ VR6 Corrado Jetta Passat 35i Scirrocco Vento Polo 6N1 Seat Cordoba Seat Ibiza Seat Toledo Advantages of this brake system: High deceleration Thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles Directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling. Required components: internally vented brake discs 335x22 of VW Phaeton, reference: 3D0 615 601 D (the 5x112 PCD must be modified to 4x100 or 5x100, what we can do ourselves in our workshops) brake caliper: VW Golf R32 V6 oder S3 , VW reference left 8N0615423C + right 8N0615424C brake caliper mounting bracket: reference 8N0615425B The adapters are delivered black galvanized, therefore best rust protection and great look! Delivery: 2x brake caliper adapters VW Golf MK1 MK2 MK3 Caddy Scirocco Jetta VR6, etc 2x axle stubs, left and right 2x wheel hubs 4x100 2x suitable centric rings complete screw kit (10.9) material certificate

€286.48*

BMW E30 Wheel Hub Conversion PCD 5x120 E36 E46 Adapter Spacer Front 5 Hole Hub

Conversion kit für all BMW E30 models to install the wheel hub of BMW E46 and E36 with 5x120 PCD.The adapter bushs / bushings and the nuts are made of high-strength steel and black galvanized. Assembly: The adapter buchs are simply placed on the original E30 axle stub. Then the E36/E46 hub with the original E36/E46 bearings and the dust cover can then be placed over it and then screwed with the nuts (with lock function). You can reset the original state at any time.Brake caliper adapters for larger brake systems are available in our shop,e.g under article number 149. The axle track is then 7mm wider on each side.If you want to keep the original brake system or a large brake system where the brake discs have a different bolt pattern such as 5x120, we can simply re-drill the brake discs for you -> you can find the article -> by clicking here Required components: hub E36/E46, including wheel bearing and dust cover Socket wrench insert with wrench size 46 for mounting the wheel hub Delivery: 2x adapter bushs for conversin BMW E30 to E36/E46 hub 2x nuts (with lock function) material certificate

€105.75*

Brake Caliper Adapter Golf MK2 MK3 Rear Axle to 310x22 Phaeton u. Golf 4 R32 Caliper

Brake caliper adapter, rear axle, on Golf MK1 MK2 series for conversion to 310x22 mm Phaeton brake discs, combined with the R32 / S3 brake caliper. Suitable for the following vehicle (only Front WD): Golf MK1 (only with our axle pivot / pin, Epytec, item number 313) Golf MK2 MK3 + GTI+ VR6 Corrado Jetta Passat 35i Scirocco Vento Polo 6N1 Seat Cordoba Seat Ibiza Seat Toledo Advantages of this brake system: high deceleration thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: VW Golf R32 V6 or S3 , VW reference left 8N0615423C, right 8N0615424C brake caliper mounting bracketr, reference 8N0615425B brake disc: internally vented VW Phaeton 310x22mm, reference 3D0 615 601 D Delivery Lieferumfang: 2x brake caliper adapters VW Golf MK1 MK2 Mk3 Caddy Scirocco Jetta VR6 etc. high-strength mountig screws material certificate

€170.56*

Hub Centric Ring Golf Corrado G60 VR6 16V Corrado Rear Axle Brake System R32 S3

Hub centric ring made of steel for bracke system conversion.Our rings are necessary, when discs of auto models, having an important hub diameter, are installed on vehicles with smaller diameter hub. For example, these ring are suitable for mounting onto Golf MK1 MK2 MK3 VR6 G60 brake discs from front axle to rear axle. You will find in our shop the corresponding brake caliper adapters. All our rings are designed to be less thick than the discs, so that the rims can fit correctly. Technical data: hub centric internal diameter: 57,10 mm hub centric external diameter: 65,00 mm thickness : 5,50 mm Delivery: 1x hub centric ring for Golf MK1 MK2 MK3 VR6 G60 and many other models If you need several rings, you must order the number you need per unit. If you need a special ring, we make custom rings. Contact us.

€24.99*

Hexagonal screw M16x40x1.5 DIN 961 high resistance with fine pitch thread Galvanized

Durchmesser/Größe: M16 x 1,5 | Länge: 40mm | Oberfläche: verzinkt 10.9

Hexagonal screw high resistance entirely threadType: M16x40Thread: 1.5GalvanizedQuality: 10.9

Variants from €0.51*

€3.09*

Hexagonal socket head cap screw M10x30 DIN 912 high resistance with fine pitch thread Blank

Durchmesser/Größe: M10 x 1.25 | Länge: 25mm | Oberfläche: verzinkt 12.9

Hexagonal socket head cap screw high resistance entirely threadType: M10x30Thread 1.25BlankQuality 12.9

Variants from €0.56*

€2.72*

Hexagonal socket head cap screw high resistance M12x25x1.5 DIN 912 with fine pitch thread Blank

Durchmesser/Größe: M12 x 1.5 | Länge: 40mm | Oberfläche: blank 12.9

Hexagonal socket head cap screw high resistance entirely threadType: M12x25Thread 1.5 BlankQuality 10.9

Variants from €0.56*

€1.99*

Hexagonal countersunk socket screw M10x20x1,25 DIN 7991 Blank

Durchmesser/Größe: M10 x 1,25 | Länge: 25mm | Oberfläche: blank 10.9

Hexagonal countersunk socket screw high resistanceType: M10x25Thread: 1.25BlankClass 10.9

Variants from €0.60*

€3.33*

Screw Hexagon Socket Head Cap Normal Fine Thread M5-M16 High-Strength 10.9 12.9 DIN912 8.8 Steel - Diameter/Size: M6 x Standard Thread- Length: 40mm - Surface: galvanized 8.8

Durchmesser/Größe: M6 x Regelgewinde | Länge: 40mm | Oberfläche: verzinkt 8.8

Cylinder head bolt with hexagon socket, normal and fine thread High-strength DIN912 screws: size: M5-M16 length: 16-180mm surface: 8.8; 10.9; 12.9

€0.56*

Centric Ring from 60.00 to 67.00 mm Mercedes Brake Disc Toyota Supra

Hub centric ring made of steel for brake system conversion.Our rings are necessary, when discs of auto models, having a larger hub diameter, are installed on vehicles with smaller diameter hub. For example, these rings are suitable for brake discs conversion T3 bus into brake disc system from Mercedes models. You will find in our shop the corresponding brake caliper adapters. All our rings are designed to be less thick than the discs, so that the rims can fit correctly. Technical data: hub centric internal diameter: 60,00 mm hub centric external diameter: 67,00 mm thickness : 8,00 mm Delivery: 1x hub centric ring with material certificate If you need several rings, you must order the number you need per unit. If you need a special ring, we make custom rings. Contact us.

€22.99*

Hexagonal socket head cap screw M12X35 Stainless steell V2A DIN 912 Blank

Durchmesser/Größe: M14 x 1.5 | Länge: 35mm | Oberfläche: verzinkt 12.9

Hexagonal socket head cap screw entirely threadType: M12x35Stainless steel (V2A)

Variants from €0.56*

€4.32*

Screw Hexagon Socket Normal Fine Thread M5-M16 High-Strength 10.9 12.9 DIN933 8.8 Steel - Diameter/Size: M10 x Standard Thread - Length: 40mm - Surface: blank 10.9

Durchmesser/Größe: M10 x Regelgewinde | Länge: 40mm | Oberfläche: blank 10.9

High-strength hexagon head screw with thread up to the head Size: M10x40 Alloy: blank Strength class 10.9

Variants from €0.51*

€0.93*

Hub Centric Ring Brake Disc E46 E30 E36 BMW 328i 325i 62.00 to 75.00 mm

Hub centric ring made of steel for bracke system conversion.Our rings are necessary, when discs of car models, having a larger hub diameter, are installed on vehicles with smaller diameter hub. For example, these rings are suitable for mounting E46 brake discs onto the BMW E30. You will find in our shop the corresponding brake caliper adapters. All our rings are designed to be less thick than the discs, so that the rims can fit correctly. Technical data: hub centric internal diameter: 62,00 mm hub centric external diameter: 75,00 mm thickness : 6,00 mm Delivery: 1x hub centric ring for BMW and many other models with material certificate If you need several rings, you must order the number you need per unit. If you need a special ring, we make custom rings. Contact us.

€28.99*

Aluminum bush Ø outside 21; Ø inside 10.5; Length 9.5

Bushing Ø ouside 21 mm Ø inside 10,5 mm Length 9,5 mm Material Aluminium Scope of delivery: 1x bush Aluminium

€10.07*

Screw, Hexagon Socket, Head Cap, Normal Fine Thread M5-M16 High-Strength 10.9 12.9 DIN912 8.8 Steel - Diameter/Size: M10 x 1.25 - Length: 50mm - Surface: blank 10.9

Durchmesser/Größe: M10 x 1.25 | Länge: 50mm | Oberfläche: verzinkt 10.9

Cylinder head bolt with hexagon socket, normal and fine thread High-strength DIN912 screws: size: M5-M16 length: 16-180mm surface: 8.8; 10.9; 12.9

Variants from €0.56*

€2.90*

Hub Centric Ring Brake Disc VW Golf MK4 R32 Audi A3 S3 TT Cupra R 65.10 to 67.90 mm

Hub centric ring made of steel for brake system conversion.Our rings are necessary, when discs of car models, having a larger hub diameter, are installed on vehicles with smaller diameter hub. For example, these rings are suitable for brake discs conversion on models Golf MK4 Audi A3 Seat Leon Cupra R etc. into brake disc system of the new models VW Audi with hub centric diameter 68,00 mm. You will find in our shop the corresponding brake caliper adapters. All our rings are designed to be less thick than the discs, so that the rims can fit correctly. Technical data: hub centric internal diameter: 65,10 mm hub centric external diameter: 68,00 mm thickness : 7,00 mm Delivery: 1x hub centric ring for VW Golf MK4 Audi S3 A3 Cupra R and many other models with material certificate If we do not have a suitable centring ring, you can easily create one in our configurator (click here) and order it directly.

€19.99*

Hub Centric Ring Brake Disc VW Golf MK5 GTI 6 65.10 to 66.80 mm Audi A3 S3 Scirocco

Hub centric ring made of steel for bracke system conversion.Our rings are necessary, when discs of car models, having a larger hub diameter, are installed on vehicles with smaller diameter hub. For example, these rings are suitable for mounting Mercedes brake discs onto the Golf MK5, MK6 Audi S3 A3 etc. You will find in our shop the corresponding brake caliper adapters. All our rings are designed to be less thick than the discs, so that the rims can fit correctly. Technical data: hub centric internal diameter: 65,10 mm hub centric external diameter: 66,8 mm thickness : 7,00 mm Delivery: 1x hub centric ring for VW Golf MK5 MK6 Polo Audi S3 A3 and many other models with material certificate If you need several rings, you must order the number you need per unit. If you need a special ring, we make custom rings. Contact us.

€16.98*

stainless steel bush Ø outside 20; Ø inside 7; Length 18.5

Bushing Ø ouside 20 mm Ø inside 7 mm Length 18,5 mm Material Stainless steel V2A Scope of delivery: 1x bush Stainless steel V2A

€15.17*

Cylinder Head Bolts Hexagon Socket Normal FineThread M5-M16 10.9 12.9 DIN912 8.8 Steel - Size: M10 x 1,5 - Lenght: 80mm - Blank 12.9

Durchmesser/Größe: M10 x 1.25 | Länge: 80mm | Oberfläche: blank 12.9

Cylinder-head bolts with hexagon socket, flat head, high-strengthDimension: M10x80 Alloy blankQuality 10.9

Variants from €0.56*

€5.27*

Cylinder Head Bolts Hexagon Socket Normal FineThread M5-M16 10.9 12.9 DIN912 8.8 Steel - Size: M14 x 1,5 - Lenght: 100mm - Blank 12.9

Durchmesser/Größe: M14 x 1.5 | Länge: 100mm | Oberfläche: verzinkt 12.9

Cylinder-head bolts with hexagon socket, flat head, high-strengthDimension: M14x100 Alloy blankQuality10.9

Variants from €0.56*

€8.01*

Screw Hexagon Socket Head Cap Normal Fine Thread M5-M16 High-Strength 10.9 12.9 DIN912 8.8 Steel - Diameter/Size: M14 x 1.5 - Length: 80mm - Surface: blank 12.9

Durchmesser/Größe: M14 x 1.5 | Länge: 80mm | Oberfläche: verzinkt 12.9

Cylinder head bolt with hexagon socket, normal and fine thread High-strength DIN912 screws: size: M5-M16 length: 16-180mm surface: 8.8; 10.9; 12.9

Variants from €0.56*

€6.96*

Screw Hexagon Socket Head Cap Normal Fine Thread M5-M16 High-Strength 10.9 12.9 DIN7991 8.8 Steel - Diameter/Size: M12 x 1,5 - Length: 30mm - Surface: blank 10.9

Durchmesser/Größe: M12 x 1,5 | Länge: 30mm | Oberfläche: verzinkt 10.9

Senkkopfschrauben Normal und FeingewindeHochfeste DIN7991 Schrauben: Größen: M5-M16 Längen: 12-60mm Oberfläche: 8.8; 10.9; 12.9

Variants from €0.60*

€5.08*

Hub Centric Ring Wheel Hub Golf Corrado G60 VR6 16V Corrado Rear Axle Brake System R32 S3

Hub centric ring made of steel for bracke system conversion.Our rings are necessary, when discs of car models, having a larger hub diameter, are installed on vehicles with smaller diameter hub. For example, these rings are suitable for mounting brake discs from new VW Audi models with 68,00 mm hub centric onto the Golf MK1 MK2 MK3 VR6 G60. All our rings are designed to be less thick than the discs, so that the rims can fit correctly. Technical data: hub centric internal diameter: 57,00 mm hub centric external diameter: 68,00 mm thickness : 6,00 mm Delivery: 1x hub centric ring for VW Golf MK1 MK2 MK3 Corrado VR6 G60 and many other models with material certificate If you need several rings, you must order the number you need per unit. If you need a special ring, we make custom rings. Contact us.

€20.99*

Steel / Zincor Bush Bushing Sleeve Ø External 25; Ø Internal 12,2 Length 3,0

Bush / bushing / sleeve external diameter: 25mm internal diameter: 12,2mm lenght: 3mm material: steel-electrolytically galvanized Delivery: 1x bush / bushing / sleeve, steel-electrolytically galvanized

€2.36*

Screw Hexagon Socket Normal Fine Thread M5-M16 High-Strength10.9 12.9 DIN912 8.8 Steel- Size: M14 x 1,5 - Length: 40mm - Surface: blank 12.9

Durchmesser/Größe: M14 x 1.5 | Länge: 40mm | Oberfläche: verzinkt 12.9

Cylinder head bolts with hexagon socketSize: M14x40 Thread pitch: 1,5Material steel high-strength quality 12.9

Variants from €0.56*

€4.85*

Screw, Hexagon Socket, Head Cap, Normal Fine Thread M5-M16 High-Strength 10.9 12.9 DIN912 8.8 Steel - Diameter/Size: M14 x Standard Thread - Length: 70mm - Surface: blank 10.9

Durchmesser/Größe: M14 x Regelgewinde | Länge: 70mm | Oberfläche: blank 10.9

Cylinder head bolt with hexagon socket, normal and fine thread High-strength DIN912 screws: size: M5-M16 length: 16-180mm surface: 8.8; 10.9; 12.9

Variants from €0.56*

€8.92*

Stainless Steel Bush Bushing Sleeve Ø External 20; Ø Internal 10,2; Length 5

Bush / bushing / sleeve external diameter: 20mm internal diameter: 10,2mm length: 5mm material: stainless steel Delivery: 1x stainless steel bush / bushing / sleeve

€13.17*

Stainless Steel Bush Sleeve Galvanized Ø external 25; Ø internal 12,2; Length 23,4

Bush / bushing / sleeve external diameter: 25mm internal diameter: 12,2mm lenght: 23,4mm material: stainless steel Delivery: 1x bush / bushing / sleeve made of stainless steel

€12.56*

Mercedes Benz W463 G-Klasse Brake System 380x36 AMG Brake Caliper Adapter 6-piston

Brake caliper adpater, front axle, on all Mercedes Benz W463 G-Klassen for conversion to Mercedes Benz 6-piston brake caliper from G63 AMG, combinend with the Mercedes Benz G63 AMG brake discs. Advantages of this brake system: top deceleration, without comparison with conventional brake discs easy assembly better performance supplied material certificate can easily be restored to the original state Required components: brake caliper: Mercedes G63 AMG 6-piston , reference A 463 420 51 00 + A 463 420 52 00 brake disc: Mercedes G63 AMG (front axle) reference A 463 421 15 00 Delivery: 2x brake caliper adapters for Mercedes Benz W463 G-Klasse high-strength mounting screws material certificate

€223.36*

VW T3 Transporter Brake Caliper Adapter Audi ATE 981 982 Brake System 347x30 Front Axle

Brake caliper adapter, front axle, on model T3 bus/transporter for conversion to auf internally ventred 347x30mm brake discs, combined with the Audi A6 brake calipers. Advantages: top deceleration the system no longer warms up and no more fading very cheap components. thanks to the material certificate supplied with the order, it is possible to register your purchase quick and easy assembly with the supplied mounting screws Required components: brake disc: Audi A6 347 x 30 mm, reference 4F0615301G brake caliper mit mounting bracket: ATE 981 + 982 from Audi A6 4F for 347mm disc, manufacture reference 8E0615124B wheel hubs to center around the brake disc are also available in our shop only fitting with the 14 inch axle of the T3 (to determine at the caliper mounting screw, this must have 16mm thread) Rims: at least 16 inch Delivery: 2x brake caliper adapters, front axle, VW T3 bus/transporter/van high-strength mounting screws material certificate Installation instructions

€192.36*

Hub Centric Ring VW T3 Bus Van Utiliy to Phaeton Audi Discs

Hub centric ring made of steel for bracke system conversion.Our rings are necessary, when discs of car models, having a larger hub diameter, are installed on vehicles with smaller diameter hub. For example, these rings are suitable for brake discs conversion on models VW T3 into brake disc system of the new models VW Audi with hub centric diameter 68,00 mm. You will find in our shop the corresponding brake caliper adapters. All our rings are designed to be less thick than the discs, so that the rims can fit correctly. Technical data: hub centric internal diameter: 64,65 mm hub centric external diameter: 68,00 mm thickness : 9 mm Delivery: 1x hub centric ring for VW T3 bus transporter If you need a special ring, we make custom rings. Contact us.

€25.84*

Brake Disc Centric Ring Audi VW 57,1x66,9 mm Mercedes Brake Disc

Hub centric ring made of steel for brack system conversion.Our rings are necessary, when discs of car models, having a larger hub diameter, are installed on vehicles with smaller diameter hub. These centering rings are suitable, for example, for brake discs conversion at Audi, VW on the brake discs of Mercedes models. Matching caliper adapters are also available in our shop. All our rings are designed to be less thick than the discs, so that the rims can fit correctly. Technical data: hub centric internal diameter: 57,10 mm hub centric external diameter: 66,90 mm Center ring height: 5,00 mm Delivery: 1x hub centric ring for VW, Audi and other models material certificate If you need several rings, you must order the number you need per unit. If you need a special ring, we make custom rings. Contact us.

€23.99*

Centric Ring Brake Disc Centering BMW X5 72,50-75,00 mm BMW 7 F01

Centric ring made of steel for bracke system conversion.Our rings are necessary, when discs of car models, having a larger hub diameter, are installed on vehicles with smaller hub diameter. For example, these rings are suitable on models BMW series 7 F01 for a brake disc conversion to BMW X5, BMW E46, etc. You can also find the right brake caliper adapter in our shop. All our rings are designed to be less thick than the discs, so that the rims can fit correctly. Technical data: hub centric internal diameter: 72,50 mm hub centric external diameter: 75,00 mm thickness : 7,00 mm Delivery: 1x centering ring for BMW and many other models material certificate Regarding to the order: if you need several rings, you must order the number you need per unit. If you need a special ring, we make custom rings. Contact us.

€23.99*

%

Opel Manta Ascona Kadett Adapter Distanzblech Ersatz für original Hitzebleche Edelstahl

Distanzblech das als Ersatz für original Hitzeblech dienen aus rostfreiem Edelstahl an der Hinterachse passend für Kadett C Manta und Ascona B. Lieferumfang: 1x Distanzblech das als Ersatz für original Hitzeblech dienen, aus rostfreiem Edelstahl

€4.30* €11.37* (62.18% saved)

Mercedes Benz SLK 55 AMG Brake System 360x32 AMG Performance Brake Caliper Adapter 6-piston

Brake caliper adapter, front alxe, on models Mercedes Benz SLK 55 AMG, for conversion to the Mercedes Benz SLK 55 AMG Performance 6-piston brake calipers, combimed with the 360x32mm brake discs.Since the original mounting brackets are not available individually, they are extremely expensive. With our adapter kit you can install the performance brake system plug and play. Advantages of this brake system: top deceleration, without comparison with conventional brake discs easy assembly better performance supplied material certificate can easily be restored to the original state Required components: brake caliper: Mercedes SLK 55 AMG Performance 6-piston, reference 20.8885.041A / 20.8885.031A brake disc: Mercedes SLK 55 AMG black series, front, 360x32mm, reference 209 421 0112 Delivery: 2x brake caliper adapters for Mercedes Benz SLK 55 AMG complete screw kit material certificate installation instructions

€178.74*

Brake Caliper Adapter BMW E92 E93 E91 6-piston Caliper BMW 135i 345x28 Brake Disc BMW E46 CSL

Brake caliper adapter, front axle, on models BMW E92 E93 E91 E90, etc., for conversion to dBMW Performance 6-piston brake calipers, combined with the 345x28mm BMW E46 CLS brake discs. Suitable for the following vehicles with a hole size of 122mm on the axle mount: BMW E90 BMW E91 BMW E92 BMW E93 BMW E82 (anchor plate must be shortened by a few cm on the underside) Advantages of this brake system: top deceleration, without comparison with conventional brake discs easy assembly better performance supplied material certificate can easily be restored to the original state Required components: brake caliper: BMW Performance 6-piston135i, reference 34 11 6 786 741 Brake pads from the BMW 135i Part No. 34 11 6 786 044 brake disc: BMW E46 M3 CSL , front, 345x28mm, reference : 3411 2 282 446 Delivery: 2x brake caliper adapters for BMW E92 E93 E91 E90, etc. high-strength mounting screws material certificate

€222.23*

Honda Civic CRX Integra Ballade Rover Camber Adjustement Plate Rear Plates Camber

You do not want to spend money on tires that are worn only on one side, but you want more grip and better performance' Or do you just want to get the opposite' High curve speed and cool optics. Then we have the product for you! With this product, you can adjust the camber according to your needs. Kit of camber correction / adjustment plates for rear axle. Makes possible a camber correction / ajustement. Thanks to our plates, you can modify the rear camber. Ideal for lowering the rear axle and correcting the angle defect if the tires are worn only on one side. We recommend it for racing or slalom circuits. Or simply on the road, to take turns at a higher speed. Our plates are mounted between the pivot of the axle stub and the axle. Quick and easy assembly. The wheels are then moved 5mm outwards. The plates are manufactured with high precision. They are made of steel and completely galvanized. Maximum anticorrosive protection and good optics. Suitable for all Honda / Rover models (except for Syncro - 4WD): Honda Civic 1984-1987 Honda Civic Shuttle 1984-1987 Honda CRX 1984-1987 Honda Integra 1986-1988 Honda Ballade 1984-1987 Rover 200 1984-1989 Thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles. Delivery: 2x plates, right and left material certificate

€31.25* €66.94* (53.32% saved)

Details

Audi A6 C5 S4 8D B5 Brake Caliper Adapter Audi TTRS Brake Caliper Audi A4 Brake Disc 345x30 Brake System

Brake caliper adapter for all VAG models listed below, for conversion to the TTRS brake calipers, combined with the brake discs from the Audi A4 (345x30 bolt circle 5x112), Suitable for the following vehicles: Audi A6 (C5 4B) Audi S4 (8D B5) To use the standard 17 inch Avus rims, the saddle has to be slightly adjusted. With 18 inch rims, the adapters fit Plug & Play. Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: original TTRS, reference left 8J0 615 107 + right 8J0 615 108 brake pad: referenceJ0 698 151 E brake disc: Audi A4 345x30mm, reference 8E0615301K Delivery: 2x brake caliper adaptera (see picture) high-strength mounting screws material certificate

€418.01*

Audi S4 A4 B5 Brake Caliper Adapter Rear Axle Cayenne 4-piston 330x22 Brake Disc Tuning Adapter

Brake caliper adapter, rear axle, on models Audi S4 A4 B5 for conversion to the Porsche Cayenne brake calipers.Combined with the 330x22 mm brake discs from Audi A6, rear. The Porsche calipers are connected to the hydraulics of the vehicle and can thus develop an enormous braking force. However, these do not have handbrake functions. The rear axle of Audi S4 B5 is additionally used for a handbrake brake caliper adapter. The hydraulic connection is thereby closed with a blind plug / closure cap, thus this serves only as a hand brake caliper. Suitable for the following VW und Seat models (4WD): Audi A4 B5 Audi S4 B5 Advantages of this brake system: top deceleration, without comparison with conventional brake discs perfectly matches our brake caliper adapter for the front axle must have for better performance supplied material certificate Required components: Handbrake caliper original Audi S4 B5 for 22mm thick brake discs, part number: 8D0 615 424 C, 8D0 615 423 C Brake caliper carrier original Audi S4 B5 for 22mm thick brake discs, part number: 8D0 615 405 S Brake calipers from the Porsche Cayenne from the rear axle part number: (stands on the rear number on the brake calipers, distinguishes right and left calipers) 955.352.421 + 955.352.422 (only 100% suitable with the specified Porsche calipers) Brembo NR:20.7673.03 Rear brake disc 330x22 from the Audi A6 part number: 562507JC Delivery: 2x brake caliper adapters for Porsche Cayenne caliper 2x brake caliper adaper to adapt the hand brake caliper high strength mounting screws material certificate Stress analysis

€358.04*

Centering Ring for Brake Disc Custom Made Audi VW Seat Opel Honda

Exclusive and individual centering rings according to your wishes There is such a large selection of brake discs that a centering ring is almost always needed so that the brake disc can be centered on the wheel hub, as the hub bores are different. With our configurator we offer you the possibility of assembling centering rings according to your desired dimensions. Possible uses are: Centering rings for brake discsCentering rings for rimsCentering rings, wherever something needs to be centered Facts and delivery: All rings are made of high-strength steel. The scope of delivery is regulated by the number of items selected by you (selected number of items 1 piece = 1 ring). And that is how it works: Simply select your desired dimensions below. When you have filled out in all the required fields, you can put your desired quantity in the shopping cart legen. Pay there and then we immediately start production.

€34.00*

Brake caliper adapter custom configurator

Exclusive and individual: Brake caliper adapter according to your choice We manufacture your brake caliper adapters for your desired components and for your vehicle. Here is a selection for you, how customers have managed to mount their desired combination on their vehicle with the configurator. Audi RS 4 Avant B7 brake upgrade to Mercedes AMG C63 brake system, click here. Audi 80 Avant brake upgrade to RS2 calipers, click here. To enable us to make the required brake caliper adapters for your project, we need a few data from you. You can find out exactly what this data is by clicking through the individual steps of the configurator below. In advance you will find the templates here to take your measurements on the vehicle.>>print the PDF-template I-adapter, click here<<>>print the PDF-template L-adapter, click here<<

€111.00*

PCD Adapter Spacer Custom-Made Manufacturing

Exclusive and individual bolt circle adapters / track extensions according to your wishes There is such a large selection of rims that there are almost never the right adapter plates to fit your vehicle. This is over now! With our configurator, we offer you the possibility to put together bolt circle adapters and wheel spacers according to your desired dimensions. Facts and scope of delivery: All plates are made of high-strength aircraft aluminum and are delivered with engraving on the plate and a technical certificate from TÜV (technical report) delivered. This allows registration by individual acceptance. The scope of delivery is regulated by the number of pieces you choose (selected number of pieces 1 piece = 1 plate and the necessary mounting screws to fix the plate to the scar). The mounting screws to fix the bolt circle adapters to the vehicle are delivered in such a way that the thread looks 20mm out of the plate. Please check if the length is sufficient so that the screw goes completely through the wheel hub and engages in all threads. Realized customer projects:Here is a selection for you of how customers have used the configurator to mount their dream rim on their vehicle or what is possible with our bolt circle adapters. Example on a Porsche rim, click here. Example of a bolt circle adapter on an offroadbuggy, click here. Better cornering stability for a trailer, learn more. And this is how it works: Just select your vehicle below. We make a pre-selection of vehicle data which are listed in our database. Some fields are already filled out automatically. If your vehicle is not listed or you have a motorbike or quad you can also make the selection manually. You can choose the bolt circle adapter/track width from 20mm thickness per side in 1mm steps. This is especially useful if you want to achieve a maximum width of your vehicle. With this you are no longer bound to straight dimensions. When you have filled out all required fields you can put your desired quantity into the shopping cart and pay there. We manufacture all adapter plates with thread for the rims, so that the rims can always be fixed with wheel bolts. Important Info:We manufacture all adapter plates with thread for the rims, so that the rims can always be fastened with wheel bolts and not with stud and no longer with wheel nuts as with your vehicle: The plates are clearly more favorable in the production and thus for you more favorably. With defective wheel bolts, the change is an enormous effort. The plate must be completely dismantled and the knurled bolt pressed out. This is not necessary for wheel bolts. Just order a new screw and you are done! You have a much larger selection of wheel bolts for your desired rim, the selection of wheel nuts is much smaller. Developed exclusively for alloy wheels, they offer a customised fit and optimum performance. With an impressive load capacity of up to 850 kg/wheel, our bolt circle adapters set new standards in load capacity. Please note that they are not suitable for steel rims. Configure your bolt circle adapters now for the highest quality in your conversion

€96.00*

Details

Mercedes Benz E63 W212 CLS 63 W218 ceramic 402x39mm brake system Mercedes Benz 6-piston brake caliper adapter

Brake calipet adapter, front axle, on models Mercedes Benz E63 W212 and CLS63 W218, for conversion to the Mercedes Benz Ceramic brake discs 402x39, combined with the Mercedes Benz 6-piston W205, W213, C190 brake calipers.zu.Since the original Mercedes brake caliper bracket is not available for purchase individually, but only in conjunction with the 6-piston calipers, we have developed this adapter.. Advantages of this brake system: top deceleration, without comparison with conventional brake discs easy assembly better performance supplied material certificate can easily be restored to the original state Required components: brake caliper: Mercedes W197 SLS W205 C63 AMG 6-piston, reference A204 421 99 98 and A204 421 97 98 or 2124219798 and 2124219998 brake disc: ceramic brake disc from Mercedes CLS 63, 402x39mm, front axle, reference : 231 421 15 12 / 231 421 16 12 Delivery: 2x brake caliper adapters for Mercedes Benz E63 W212 CLS 63 W218 complete screw kit material certificate

€194.31*

Gearbox Mounting Bracket VW Polo Lupo 02M 6-speed Gear Transmission Golf MK4 R32 Conservion 1,8T Engine

Gearbox mounting bracket for 02M 6-speed gearbox.With this bracket , nothing stands in the way of converting to a 1.8T engine in the VW Polo, Lupo.It is absolutely necessary in order to install the original 02M 6-speed gearbox from Golf MK4 R32 engine into the above models. Advantages: quick and easy conversion for 02M 6-speed gearbox and the 1.8T engine excellent corrosion protection. All parts are supplied galvanized. 100% fitting screws are supplied Delivery: 1x gearbox mounting bracket for conversion to 02M 6-speed gearbox material certificate

€62.67*

Brake Caliper Adapter VW Passat 3B 3BG Brake Disc 269x22 Audi Allroad C5 Brake Caliper Rear Axle Conversion

Brake caliper adapter on model Passat 3BG, rear axle, for conversion to rear brake disc 269x22 mm, combined with the brake calipers of Passat 3BG 4 Motion. Advantages of this brake system: top deceleration, without comparison with conventional brake discs easy assembly better performance supplied material certificate Required components: brake caliper: 3BG 4 Motion brake caliper, reference VW left 4B0 615 423, right 4B0 615 424 brake caliper mouting bracket: reference 4D0 615 425 B brake disc: 269x22 vom Audi Allroad C5 reference, 4Z7 615 601 Delivery: 2x brake caliper adapters complete screw kit material certificate

€93.77*

Brake Caliper Adapter VW T-Roc Brake Disc Golf Mk7R 310x22 Brake System Brake Caliper Conversion

Brake caliper adapter, rear axle, on model VW T-Roc, for conversion to the 10x22 mm Golf Mk7R brake discs, combined with the VW Golf Mk7R brake calipers. Suitable for: VW T-Roc Advantages of this brake system: extreme delay values thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake disc: internally ventilated 310x22, VW Golf 7R, reference 1K0615601N original brake calipers with carrier for handbrake from Golf 7R part number: Part number brake caliper: 5Q0615424 / 5Q0615424 Part number brake caliper carrier: 5Q0615425 / 8V0615425B Delivery: 2x brake caliper adapters VW T-Roc complete screw material (10.9) material certificate

€61.13*

Brake Caliper Adapter Opel Astra H TTRS Brake System 370x32 TTRS Brake Caliper Conversion Tuning

Brake caliper adapter on models Opel Astra H series, for conversion to the TTRS brake calipers. combined with the original TTRS brake discs. Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: original TTRS, reference left8J0 615 107 / right 8J0 615 108 brake pads: set, reference 8J0 698 151 E brake disc: TTRS 370x32 mm, reference 8J0615301F (RS3 discs do not fit, different bell depth) brake discs have to be rebored to 4x110 and hub bores have to be modified to 70mm (can also be done in our house) Delivery: 2x brake caliper adapters high-strength mounting screws material certificate

€441.30*

Audi RS4 B5 Brake Caliper Adapter Rear Axle Audi RS5 Brake Disc 330x22 VW T5 T6 Caliper Tuning Adapter

Brake caliper adapter, rear axle, on model Audi RS4, for conversion to the RS5 brake discs 330x22, combined with the rear VW T5 T6 transporter brake calipers. The adapters are suitable to all Audi RS4 models Vorteile dieser Bremsanlage: Only other discs are required, all other components are original, i.e. don't buy expensive components Discs can be obtained cheaply, also directly from us. High deceleration Thanks to the material certificate supplied with the order, it is possible to approve your purchase even for series vehicles Directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake disc: Audi RS5 330x22, reference 8T0.615.601.A brake caliper: T5 T6 transporter, reference7H0 615 423 Brake caliper carrier from the Audi A4 part number: 8K0.615.425.A / 8K0.615.426.A brake pads: reference 4G0615415 Delivery: 2x brake caliper adapters for Audi RS4 high-strength mounting screws material certificate

€342.59*

BMW E30 Brake Caliper Adapter 294x22 Brake Disc Mini Countryman BMW E36 Brake Caliper 5-Hole Conversion

Brake caliper adpater (front axle) on model BMW E30 with the BMW E36 E46 hub, for conversion to 294x22 brake discs from Mini Countryman, combined with the brake caliper from BMW E36/E46 320i-328i.A very good advantage with this brake system is that the original rims can be used. Required component: brake caliper: BMW E36/E46 320i-328i, reference 34 11 1 160 352 right / 34 11 1 160 351 left brake caliper mounting bracket: BMW E36/E46 320i-328i, reference: 34 10 6 758 104 brake disc: 294x22 from Mini Countryman, reference: 34 11 9 804 828 consersion kit to 5-hole hub (item-number 126 in our shop ) the brake caliper mounting bracket has to be modified a little so that it does not interfere with the axle support Advantages of this brake system: high deceleration the original rims can be used thanks to the material certificate supplied with the order, it is possible to approve your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling. Delivery: 2x brake caliper adapters for BMW E36 complete screw kit Stress analysis / FEM calculation for entry material certificate the original rims can be used

€145.50*

Brake Caliper Support Carrier VW Corrado Golf MK1 MK2 MK3 Jetta Passat 35 i VR6 G60 Rear Axle Brake Conversion Tuning

New brake caliper support / carrier / bracket for the rear axle, suitable for VW Corrado Golf MK1 MK2 MK3 Jetta Passat 35 i VR6 G60. The brake caliper supports are suitable in connection with many of our brake caliper adapters. Delivery: 2x brake caliper supports / carriers / brackets for VW Corrado Golf MK1/2/3 Jetta PassatPart number: 357 615 125 C

€79.36*

Brake Caliper Brake Caliper Mounting Bracket Brake Pads VW Golf Corrado G60 Conversion Front Axle

New brake calipers, brake caliper mounting brackets and brake pads for conversion to VW Golf Corrado G60. The brake caliper is suitable in connection with many brake caliper adapters from us. Delivery: 4x brake pads 8D0 698 151L, 357 698 151B, 357 698 151 brake caliper front axle left 443 615 124A, 443 615 124F, 443 615 124FV, 857 615 124 brake caliper front axle right 443 615 123A, 443 615 123F, 443 615 123FX, 857 615 123 brake caliper mounting brackets, left+right, front axle VW Golf Corrado G60

€213.57*

Brake Caliper VW Golf Corrado G60 Conversion Lucas Girling 54 ATE Front Axle right

A new brake caliper, left, for Golf MK2, MK3, G60 Corrado and many other models. The brake caliper is suitable in connection with many brake caliper adapters from us. Suitable manufacter reference: 443 315 124 A, 443 315 124 F, 443 315 124 A FV, 443 315 124 FX 857615124 Delivery: 1x brake caliper, right, for VW Golf MK2 MK3 Corrado G60 consersion / ATE / Girling 54

€71.47*

Bremssattel VW Golf 3 4 Cabrio Sharan Vento Seat G60 Umbau Lucas Girling 54 ATE Hinterachse links

Ein neuer Bremssattel linke Seite Hinterachse für Golf 3,4, Sharan, Vento G60 und viele weitere Modelle. Die Bremssättel sind passend in Verbindung mit vielen Bremssatteladapter von uns. Passende OE Vergleichsnummern: 1001960 1478438 1H0 615 423 1H0 615 423 A 1H0 615 423 B 1H0 615 423 D 1H0 615 423 DX Lieferumfang: 1x Bremssattel links Hinterachse für VW Golf 3,4, Sharan, Vento G60 Umbau Lucas / ATE / Girling 54

€108.51*

Bremssattel VW Golf 3 4 Cabrio Sharan Vento Seat G60 Umbau Lucas Girling 54 ATE Hinterachse rechts

Ein neuer Bremssattel, Faustsattel, rechte Seite Hinterachse für Golf 3,4, Sharan, Vento G60 und viele weitere Modelle. Die Bremssättel sind passend in Verbindung mit vielen Bremssatteladapter von uns. Passende OE Vergleichsnummern: 1001959 1121350 1478429 1H0 615 424 1H0 615 424 A 1H0 615 424 B 1H0 615 424 D 1H0 615 424 DX Lieferumfang: 1x Bremssattel rechts Hinterachse für VW Golf 3,4, Sharan, Vento G60 Umbau Lucas / ATE / Girling 54

€108.51*

Opel Manta A Ascona Kadett C Adapter Disc Brake Conversion Brake Rear Axle Caliper Tuning Adapter

Adapter for convertion to disc brakes, rear axle, on models Kadett C Manta and Ascona B with the small brake drum. Required components: brake caliper: VW or Audi Girling 38 installed in the Golf, Vento, Passat, Scirocco, Corrado on the rear axle brake caliper mounting bracket: rear Golf Mk2 Mk3, reference 6N0615425/6N0615426 handbrake cable: VW / Audi that the calipers are made of brake disc: Audi 80, size 245 x 10, YoC 86-96, rear axle (used with 4 x 108 bolt circle). The bolt circle must be rebored to 4x100) Adapters are supplied galvanized. Therefore best protection against corrosion according to DIN ISO 9227 Suitable from 13 inch rims Delivery including important spacer plates that replace the original heat plates made of stainless steel Dlivery: 2x adapters for Kadett C Manta and Ascona B with the small brake drum 2x spacer plates for Kadett C Manta and Ascona B with the small brake drum installation instructions material certificate stress analysis / FEM calculation for registration

€164.75*

Mercedes Benz GLC GLS Ceramic Brake System 420x40 AMG Brake Caliper Adapter 6-piston Tuning Adapter

Brake caliper adapter, front axle, on models Mercedes Benz GLC, for conversion to the Mercedes Benz GLS ceramic AMG brake system 420x40 with the 6-piston brake calipers.Finally an adapter to be able to upgrade from the original 360mm to the 420mm ceramic brake disc from the AMG. With our adapter kit you can install the 420mm disc plug & play. Advantages of this brake system: top deceleration, without comparison with conventional brake discs easy assembly better performance supplied material certificate can easily be restored to the original state Required components: brake caliper: Mercedes GLS 63 AMG (X166) 6-piston brake disc: ceramic Mercedes GLS 63 AMG (X166), front axle, 420x40mm Delivery: 2x brake caliper adapters for Mercedes Benz GLC X253 / C253 high-strength screw material material Certificate installation instructions

€323.32*

Brake caliper adapter BMW 5 F10 F11 6 BMW M5 M6 F10 brake system 6 piston brake caliper brake disc 400x36 tuning adapter

Brake caliper adapter, front axle, on models 5th, 6th BMW F10, F11, F12 and F13, for conversion to the BMW F10 M5 and M6 F10 6-piston brake calipers, combined with the 400x36mm BMW F10 M5 brake discs.The BMW M5 6-piston calipers are simply screwed to the original axle mount using our tuning adapter instead of the original caliper. Advantages of this brake system: top deceleration, without comparison with conventional brake discs easy assembly better performance supplied material certificate can easily be restored to the original state Required components: brake caliper: BMW F10 M5 6-piston, reference 34117845747 / 34 11 7 845 748 brake disc: BMW F10 M5, front axle, 400x36mm, reference 34 11 2 284 102 / 34 11 2 284 101 Delivery: 2x brake caliper adapters for 5th, 6th BMW F10, F11, F12 and F13 complete screw kit material certificate Stress analysis / FEM calculation for registration

€210.13*

VW T3 Transporter Brake Caliper Adapter before Year of Manufacture 1986 Audi Ate 57 Brake Caliper 312x25 Front Axle

Brake caliper adapter, front axle, on model T3 transporter for conversion to internally vented 312x25mm brake discs, combined with the Audi A6 calipers. Suitable for VW T3 transporter, manufactured before 1986 with M12 screw mount on the axle Advantages: top deceleration the system no longer warms up and no more fading very cheap components. You can find second-hand caliper from 49.- € / new from 70.-€ thanks to the material certificate supplied with the order, it is possible to register your purchase quick and easy assembly with the supplied mounting screws Required components: brake disc: Audi A4 quattro, Audi A6 312x25mm, reference e.g 4B0 615 301 A Brake caliper: Audi 100/A6 C4 Girling/ ATE 57, reference 4A0615123A + 4A0615124A (left,right) brake caliper mounting brackets that were installed with the 288 brake system (required because of the shorter design of the bracket) wheel hubs to center the brake disc are also available in our shop. since the screwing surface for the adapter is not level, it must be planned before installing the adapter so that the adapter fits properly. At least 16 inch rims should be used so that the diameter of the brake disc fits underneath Hint: This adapter is for all T3 bus before Bj 86 is yours after Bj 86 you need the >> adapter with the article no: 346 << Delivery: 2x brake caliper adapters for VW T3 transporter, manufactured before 1986 with M12 screw mount on the axle< matching centering rings set of high-strength screws

€145.54*

VW T3 Transporter Brake Caliper Adapter Audi ATE 981 982 Brake System 347x30 Front Axle

Brake caliper adapter, front axle, on model T3 bus/transporter for conversion to auf internally ventred 347x30mm brake discs, combined with the Audi A6 brake calipers. Wheel hubs are supplied with this brake conversion, which retain the standard VW bolt circle /pitch circle (5x112) and are dimensionally identical. This means that the wheel bearings can continue to be used and the track is only 6 mm wider on each side. Advantages: top deceleration the system no longer warms up and no more fading very cheap components. thanks to the material certificate supplied with the order, it is possible to register your purchase quick and easy assembly with the supplied mounting screws The wheel hubs supplied retain the standard VW bolt circle/pitch circle and are identical to the original dimensions. This means that the wheel bearings can continue to be used and the track is only 6 mm wider on each side. Required components: brake disc: Audi A6 347 x 30 mm, reference 4F0615301G brake caliper mit mounting bracket: ATE 981 + 982 from Audi A6 4F for 347mm disc, manufacture reference 8E0615124B wheel hubs to center around the brake disc are also available in our shop only fitting with the 14 inch axle of the T3 (to determine at the caliper mounting screw, this must have 16mm thread) Delivery: 2x brake caliper adapters, front axle, VW T3 bus / transporter / van high-strength mounting screws material certificate 2 x required wheel hubs matching centering rings

€312.18*

BMW 3th E92 E93 E91 Brake Caliper Adapter F30 F31 Brake Caliper Conversion M2 M3 Brake Disc 380x30 4-piston Front

Brake caliper adapter, front axle, on models BMW E92 E93 E91 E90 etc, for conversion to the BMW F30/31 4-piston brake caliper, combined with the 380x30mm brake discs from BMW M2/3/4. Suitable for the following vehicles: BMW E90 BMW E91 BMW E92 BMW E93 BMW 1er Advantages of this brake system: top deceleration, without comparison with conventional brake discs ust have for better performance supplied material certificate can easily be restored to the original state easy assembly: The sleeves with knurls are simply glued / pressed into the brake caliper instead of the original sleeves. The sleeves are eccentric and can therefore be pressed perfectly, so that the brake caliper sits perfectly on the disc.The other sleeve serves as a spacer sleeve so that the brake caliper sits nicely in the center over the disc and is mounted between the axle and caliper.Just screw the whole thing in place and the conversion is done. Required components brake caliper: BMW F30/31 4-piston, reference left: 34116799469 / right: 34116799470 brake disc: BMW M2/3/4 , front axle 380x30mm, reference left: 34112284809 / right: 34112284810 Delivery: 1x set of brake caliper adapters für BMW E92 E93 E91 E90, etc. high-strength mounting screws CAD anylysis for the registration material certificate

€175.92*

Mercedes Benz CLS W218 X218 W205 W213 C190Bremsanlage 6-Kolben Bremssattel Keramik 402x39mm Adapter Tuning Adapter

Bremssattel Adapter für die Vorderachse des Mercedes Benz CLS W218 / X218 vom 250er bis 500er um auf die Mercedes Benz Keramic Bremsscheibe 402x39 in Verbindung mit den Mercedes Benz 6-Kolben W205, W213, C190 Bremssättel zu fahren.Da es die original Mercedes Bremssattelträger nicht einzeln zu kaufen gibt, sondern nur in Verbindung mit den 6 Kolben Sätteln, haben wir diesen Adapter entwickelt. Vorteile dieser Bremsanlage: Top Verzögerungswerte, kein Vergleich zu den herkömmlichen Bremsscheiben einfache Montage ein Muss bei Leistungssteigerung Materialzertifikat wird mitgeliefert einfach wieder in original Zustand rückrüstbar Benötigte Komponenten: Mercedes W197 SLS W205 C63 AMG 6-Kolben Bremssättel Teile Nr. A204 421 99 98 und A204 421 97 98 Ceramic Bremsscheibe vom Mercedes CLS 63 von der Vorderachse in 402x39mm Teilenummer: 231 421 15 12 / 231 421 16 12 Lieferumfang: 2x Bremssattel Adapter für Mercedes Benz CLS W218 / X218 vom 250er bis 500er inklusive hochfestes Schraubenmaterial Materialzertifikat

€306.88*

Steering Gear New VW T3 Transporter T3 Utility Platform Chassis Servo / Power Steering Hydraulic 251422061 VW

New hydraulic steering gear for your VW T3 transporter, platform, utility and T3 chassisThe steering gear is no longer manufactured by VW worldwide. Here with us you can now order this as a new part! So far you have been dependent on having the steering gear overhauled if it was no longer perfect. You can now save yourself this time and the often high costs.Now install your new steering gear and you have more time to take care of your other modifications. Suitable for the following vehicles: VW T3 transporter VW T3 utility VW T3 platform/chassis Advantages: new steering gear (does not require overhaul) extreme time saver higher safety when driving power / servo steering Manufacturer part number: 251422061 VW 251422061C VW 251422061X Technical data: criterioncetail new part type of gear hydraulic length (overall) 598mm mounting hole spacing 440mm input shaft height 26mm input shaft connection type toothed number of teeth on the input shank 54 input shaft diameter 17.5mm left/right hand Drive for left-hand drive Delivery: 1x hydraulic steering gear as shown including tie rods for your VW T3 transporter, platform, utility and T3 chassis

€521.47*

Brake Caliper Adapter BMW E92 E93 E91 E90 M3 6-piston Caliper BMW M5 F10 400x36 Brake Disc M5 Brake System

Brake caliper adapter, front axle, on models BMW E92 E93 E91 E90 and many more, for conversion to the BMW M5 F10 6-piston brake calipers, combined with the matching 400x36mm brake discs from the BMW M5 F10. Suitable for the following vehicles: BMW E90 M3 BMW E91 M3 BMW E92 M3 BMW E93 M3 BMW M3 4.0 V8 BMW E82 M 1er Advantages of this brake system: top deceleration, without comparison with conventional brake discs easy assembly better performance supplied material certificate can easily be restored to the original state Required components: brake caliper: BMW M5 F10 6-piston, reference 34117852119, 34117852120 brake disc: BMW M5 F10, front axle, 400x36mm, reference 34112284101, 34112284102 the hub bore of the brake disc must be widened to 79mm (can also be done in-house) Delivery: 2x brake caliper adapters for BMW E92 E93 E91 E90 uvm. complete screw kit material certificate

€189.10*

Brake Caliper Adapter BMW 5 F10 F11 Xdrive Brake System 4-piston Brake Caliper BMW G30-31 Brakce Disc 348x36 Tuning Adapter

Brake caliper adapter, front axle, on models 5th, 6th BMW F10, F11, F12 and F13 Xdrive, for conversion to the die BMW G30-31 4-piston brake calipers, combined with the BMW F11 Xdrive 348x36mm brake discs.The BMW M5 4-piston brake calipers are simply screwed onto the original axle mount using our tuning adapter instead of the original caliper. Advantages of this brake system: top deceleration, without comparison with conventional brake discs easy assembly better performance supplied material certificate can easily be restored to the original state Required components: brake caliper: BMW G30-31 4-piston Brembo, reference 4116891273 / 34116891274 brake disc: BMW F11 X-Drive , front axle, 348x36mm, reference: 3411 6 785 670 Delivery: 2x brake caliper adapters for 5th, 6th BMW F10, F11, F12 andF13 Xdrive models complete screw kit material certificate

€54.99*

Brake Caliper Adapter VW T2 transporter Mercedes W126 Brake Disc 300x28 Caliper Porsche Boxter Brake System Tuning Adapter

Brake caliper adapter, front axle, on model VW T2 transporter for conversion to the internally vented 300x28mm brake discs from Mercedes Benz W126, combiné with the Porsche Boxter calipers. Advantages: top deceleration the system no longer warms up and no more fading thanks to the material certificate supplied with the order, it is possible to register your purchase quick and easy assembly with the supplied mounting screws Required components: brake disc: Mercedes Benz W126 300x28 reference A 126 421 0412 brake caliper: Porsche Boxter reference: 996.351.425 + 996.351.426 The wheel hub must be modified so that the brake bell of the Mercedes brake disc fits over it. (can also be done in our house) Lieferumfang: 2x brake caliper adapters for VW T2 transporter high-strength mounting screws material certificate At least 16 inch rims should be used.

€189.12*

Mercedes Benz GLC GLS AMG Brake System 390x36 AMG Brake Caliper Adapter 6-piston Tuning Adapter

Brake caliper adapter, front axle, on models Mercedes Benz GLC, for conversion Advantages of this brake system: top deceleration, without comparison with conventional brake discs easy assembly better performance supplied material certificate can easily be restored to the original state Required components: brake caliper: Mercedes S / SL63 / 65 AMG 6-piston, reference A2314212698 Brake disc from Mercedes GLS 63 AMG (X166) from the front axle in 390x36mm Part Number: A2304211212 Brembo No: 09.9313.33 Brake disc from Mercedes AMG C63 S (S205) from the front axle in 390x36mm Part Number: A2314211812 Lieferumfang: 2x brake caliper adapters for Mercedes Benz GLC X253 / C253 high-strength mounting screws material certificate installation instructions

€192.99*

Bremssatteladapter Audi 100 C4 S4 A6 S6 C4 Audi RS6 Bremssattel 356x22 Wave Bremsscheibe Audi R8 Handbremse Hinterachse

Bremssattel Adapter um die Hinterachse von allen Audi 100 S4 C4 etc. auf die Audi RS6 Bremsanlage umzubauen in Verbindung mit dem Audi R8 Handbressattel. Die Audi RS6 Bremssättel werden an die Hydraulik des Fahrzeuges angeschlossen und können somit eine enorme Bremskraft entfalten. Der Hydraulikanschluss am Audi R8 Bremssattel einfach mit einem Blindstopfen verschließen. Somit dient dieser nur als Handbremssattel. Adapter sind passend für folgende Audi Modelle (Allrad): Audi 100 S4 C4 Audi S6 C4 Audi A6 C4 Vorteile dieser Bremsanlage: Top Verzögerungswerte, kein Vergleich zu den herkömmlichen Bremsscheiben hinten Ein Muss bei Leistungssteigerung Materialzertifikat wird mitgeliefert Benötigte Komponenten: Bremssattel original Audi RS6 4G für 22mm starke Bremscheiben, Teilnummer: 4G0 615 403 E Bremssattelträger original Audi RS6 4G für 22mm starke Bremscheiben , Teilenummer: 4G0 615 425 Handbremssattel original Audi R8 Schimmsattel Teilenummer Brembo: 22.8274.03 Wave Bremsscheibe 356x22 hinten vom Audi RS6 Teilenummer: 4G0 615 601 E Lieferumfang: 2x Bremssatteladapter für Audi 100 C4 S4 Baureihe hochfestes Befestigungsschraubenmaterial Materialzertifikat

€475.47*

Brake Caliper Adapter Audi RS4 A4 S4 B6 B7 E8 Brake System Mercedes C63 AMG 6-piston Caliper Brake Disc 390x36

Brake caliper adapter on models Audi RS4 RS5 B7, for conversion to the 6-piston brake calipers from Mercedes C63 AMG W204, combined with the original 2-part brake disc of Mercedes AMG c63 W204 390X36mm Suitable for the following vehicles: Audi RS4 B7 Quattro Audi A4 B7 Audi A4 B6 Seat Exeo Advantages of this brake system: thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling. Required components: 6 piston brake caliper from Mercedes C63 AMG W204, reference Brembo: 20A495.03, original reference.: A204 421 2011 2-parts brake disc: Mercedes AMG c63 W204 390X36mm, reference 09.9313.33, converted to RS4 B7 disc pots Tip &Note: the brake disc bells from the Audi RS4 B7 can simply be screwed at the Mercedes brake disc Delivery: 2x brake caliper adapters for Audi A4 S4 RS4 B6 B7 E8, Seat Exeo material certificate high-strength mounting screws

€241.48*

VW T3 Bus Conversion T4 Brake Disc Rear Axle Brake Caliper Adapter

Brake disc adapter on T3 bus model for conversion to T4 brake disc, rear axle. With these adapters, both T4 brake discs, 280 and 294 , can be mounted with the T4 caliper. Just be careful when buying components: if you want to install, for example, the 280 brake discs, you have to use the original brake calipers and the original brake caliper mounting brackets for the 280 brake discs. Advantages: top deceleration compared to the undersized original brake system the system no longer warms up and no more fading thanks to the material certificate supplied with the order, it is possible to register your purchase quick and easy assembly with the supplied mounting screws Completely new wheel hubs with wheel bolts included Required components: Brake discs from VW BUS T4 280x12 mm 15 inch VAG: 7D0 615 601 or for 16 inch 294x13.5 OE numbers: 7D0615601C Brake caliper bracket from VW BUS T4 280x12 mm 15 inch VAG:7D0615425B or for 16 inch OE number: 7D0615425A Brake caliper from VW BUS T4 15 inch OE numbers: 701 615 424 or for 16 inch OE number: 701 615 424A it must be checked whether longer wheel bolts may have to be used for the rear wheel hub, when using e.g. wheel spacers or the rim thickness. The following brake cable fits without modifications to the vehicle if the sleeve is laid generously at the bottom of the swing arm: Brake cable Golf 2, Jetta 2 1988-1992. Cable 1622 mm/ sheath 1221 mm, vehicles with rear disc brakes (except G60) No.: 191 609 721 Suitable adapters for the front axle also available from us. Delivery: 2x conversion adapters for VW T3 to T4 brake discs, rear axle Set of matching centering rings high-strength mounting screws 2x wheel hubs material certificate

€468.94*

Brake caliper adapter Mercedes E55 E63 W211 C219 CLS 55 CLS 63 SL63 SL55 R230 CLS 63 AMG brake system Benz 390x36 brake caliper 6-piston tuning adapter

Brake caliper adapter, front axle, on models Mercedes Benz E55 AMG, E63 W211, C219, CLS 55 AMG, CLS 63 AMG, SL 63, 55 R230, for conversion to the Mercedes Benz GLS AMG brake system 390x36, combined with the 6-piston caliper. Advantages of this brake system: top deceleration, without comparison with conventional brake discs easy assembly better performance supplied material certificate can easily be restored to the original state Required components: brake caliper: Mercedes S / SL63 / 65 AMG 6-piston, referecne A2314212698 Brembo reference: 20.A495.04 brake disc:Mercedes GLS 63 AMG (X166), front axle, 390x36mm, reference: A2304211212 Brembo reference Nr: 09.9313.33 Brake disc from Mercedes AMG C63 S (S205) from the front axle in 390x36mm Part Number: A2314211812 Delivery: 2x brake caliper adapters for Mercedes Benz E55 AMG, E63 W211, C219, CLS 55 AMG, CLS 63 AMG, SL 63, 55 R230 high-strength mounting screws material certificate Static stress analysis / FEM calculation for registration installation instructions

€174.69*

BMW E46 316 328i Brake System Brake Caliper Adapter 4-piston Porsche 996 Brake Caliper 328x20 Brake Disc BMW E46 M3 Tuning Adapter

Brake caliper adapter, rear axle, on models BMW E46, for conversion to the E46 M3 brake discs with 328x20 mm, combined with the brake calipers Porsche 986, 996. Suitable for all E46 (except M models) suitable without modifications. Advantages: high deceleration thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake disc: rear BMW E46 M3, 328x20mm, reference 34212282303 oder 34212282304 brake caliper: Porsche 986, reference 986.352.421 / 986.352.422, or reference 996.352.421 / 996.352.422 Delivery: 2x brake caliper adapters for den BMW E46 high-strength mounting screws material certificate

€179.91*

%

Audi S6 C4 Brake Caliper Adapter HP2 Brake System Audi TTRS 8V 8-piston Caliper 370x34 Brake Disc

Brake caliper adapter, front axle, on Audi A6 S6 and Audi 100 serie, for conversion to die Audi TTRS 8V brake system, 370x34mm brake disc and 8-piston Brembo brake caliper. Suitable for all front axles equipped with the HP2 suspension strut / shock absorber Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: original Audi TTRS 8V 8-piston, reference 8V0 615 107 / 8V0 615 108 brake disc: Audi TTRS 8V 370x34 mm, reference 8V0 615 301S Delivery 2x brake caliper adapters high-strength mounting screws material certificate

€145.65* €238.48* (38.93% saved)

BMW E31 E32 E34 Brake Caliper Adapter Brake System BMW F21 F30 F32 370x30 Brake Disc

Brake caliper adapter for the front axle of BMW 31 / 32 / 34, for conversion to the large brake system of BMW F21 / 30 / 32Suitable for all BMW 31 / 32 / 34 that have the spring strut/suspension with part number 31 31 2226166 / 31 31 2226167 installed. Required components: brake caliper: BMW F21 / 30 / 32 4-piston reference: 34116799469 34116799470 Brembo reference: 20.A788.03 / 04 brake disc: BMW F21/30/32 370x30mm, reference 34106797603 Advantages of this brake system: high deceleration thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Delivery: 2x brake caliper adapters for BMW 31 / 32 / 34 high-strength mounting screws material certificate At least 19 inch rims should be used.

€160.41*

BMW E24 E28 E31 E32 E34 Brake Caliper Adapter Brake System BMW F21 F30 F32 340x30 Brake Disc

Brake caliper adapter for the front axle of the BMW E24 / 28 / 31 / 32 / 34 to mount the large brake system of the BMW F21 / 30 / 32.Suitable for all BMW E24 / 28 / 31 / 32 / 34 that have the spring strut with part number 31 31 2226166 / 31 31 2226167 installed. Required components: BMW F21 / 30 / 32 4-piston brake caliper reference: 34116799465 / 34116799466 (with M logo ) reference: 34116850931 / 34116850932 (gray) Brembo reference: 20.A788.01 / 02 brake disc: BMW F21/30/32 340x30mm reference: 34106797602 Advantages of this brake system: high deceleration thanks to the material certificate supplied with the order, it is possible to approve your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling. Delivery: 2x brake caliper adapters for BMW E24 / 28 / 31 / 32 / 34 complete screw kit material certificate At least 17 inch rims should be used.

€160.41*

BMW 3er E92 E93 E91 M Brake Caliper Adapter Brake F30 F31 Brake Caliper Conversion M2 M3 Brake Disc 380x30 4-piston

Brake caliper adapter for the front axle of all BMW M models E92 E93 E91 E90 for conversion to the BMW F30/31 4-piston brake caliper, combined with the 380x30mm brake discs of BMW M2/3/4. Suitable for the following vehicles (M models): BMW E90 BMW E91 BMW E92 BMW E93 Advantages of this brake system top deceleration, without comparison with conventional brake discs better performance supplied material certificate can easily be restored to the original state easy assembly: The sleeves with knurls are simply glued / pressed into the brake caliper instead of the original sleeves. The sleeves are eccentric and can therefore be pressed perfectly, so that the brake caliper sits perfectly on the disc. Required components: brake caliper: BMW F30/31 4-piston, reference left: 4116799469 / right: 34116799470 brake disc: BMW M2/3/4, front axle, 380x30mm, reference left: 34112284809 / right: 34112284810 Delivery 1x set of brake caliper adapters for BMW M-Modelle E92 E93 E91 E90 high-strength mounting screws material certificate installation instructions

€223.75*

Centric Ring Ford Focus 63,5x65,00mm Audi VW Brake Disc

Centric ring made of steel for bracke system conversion.Our rings are necessary, when discs of car models, having a larger hub diameter, are installed on vehicles with smaller hub diameter. For example, these rings are suitable on Ford models for a brake disc conversion to Audi models. You can also find the right brake caliper adapter in our shop. All our rings are designed to be less thick than the discs, so that the rims can fit correctly. Technical data: hub centric internal diameter: 63,50 mm hub centric external diameter: 65,00 mm thickness : 6,00 mm Delivery: 1x centering ring for Ford Focus ST and many other models material certificate

€33.99*

Brake Caliper Adapter Front Axle BMW E24 E28 E31 E32 E34 Brake Disc BMW E34 E31 M5 345x32 Audi A8 4N 6-piston Brake Caliper

Brake caliper adapter, front axle, on models BMW E24 / 28 / 31 / 32 / 34, for conversion to the BMW E34 E31 M5 345x32 brake discs, combined with the Audi A8 4N 6-piston brake calipers.Suitable for all BMW E24 / 28 / 31 / 32 / 34 that have installed the shock absorber with part number 31 31 2226166 / 31 31 2226167 (not suitable for M models). Required components: brake caliper: Audi A8 4N 6-piston, reference 4N0 615 105 R / 4N0 615 106 R brake disc: BMW E34 E31 M5 345x32, reference 34112227736 / 34112227735 Advantages: high deceleration thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Delivery: 2x brake caliper adapters for BMW E24 / 28 / 31 / 32 / 34 high-strength mounting screws material certificate

€371.38*

Brake Caliper Adapter BMW E92 E91 E90 Brake Disc BMW E92 M3 360x30 Alfa Romeo giulia quadrifoglio Brembo 6-piston Caliper

Brake caliper adapter for the front axle of BMW E92 E93 E91 E90, etc. (reference 3121 6764443-03) for conversion to the Alfa Romeo giulia quadrifoglio Brembo 6-piston brake calipers, combined with the 360x30mm brake discs from BMW E92 M3. Suitable for the following vehicles: BMW E90 BMW E91 BMW E92 BMW E93 BMW 1er Advantages of this brake system: top deceleration, without comparison with conventional brake discs easy assembly better performance supplied material certificate can easily be restored to the original state Required components: brake caliper: Alfa Romeo giulia quadrifoglio Brembo 6-piston Brembo, reference 20C32705 brake caliper: BMW E92 M3 360x30mm, reference 2283385 / 2283386 Delivery: 1x set of brake caliper adapters for BMW E92 E93 E91 E90 and many more. high-strength mounting screws material certificate

€435.10*

Audi S2 Avant Limo Audi 80 Brake Caliper Adapter Rear Axle 302x12 Brake Disc Brake Conversion

Brake caliper adapter to mount the Audi A6 brake discs 302x12mm on the rear axle of the Audi S2 Avant, Limo and Audi 80 B4 Quatrro with 5-hole wheel hubs, combined with the original Audi S2 Coupe brake calipers on the rear axle. Required components: brake disc: A6 all-wheel drive brake discs 302x12mm, reference: 24.0112-0176.1 brake caliper: original Audi S2 Coupe , rear axle Advantages: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Delivery: 2x brake caliper adapters, rear axle, Audi S2 Avant and Limo and Audi 80 B4 Quattro with 5-hole wheel hubs high-strength mounting screws material certificate

€200.24*

Bremssatteladapter VW T2 Bus Umbau Bremsanlage Porsche 911 282x24 Bremsscheibe Porsche 4 Kolben Bremssattel Red9design Vorderachse

Bremssattel Adapter um den VW T2B Bus auf der Red9design Vorderachse, auf innenbelüftete Porsche 911 282x24mm Bremsscheiben in Verbindung mit den Porsche Boxter Sätteln umzubauen. Vorteile dieser Bremsanlage sind: Top Verzögerungswerte kein Heislaufen und Fading der Bremse mehr TÜV Eintragung mit mitgeliefertem Materialzertifikat möglich Schnelle und einfache Montage durch mitgelieferte Schrauben möglich! Benötigte Umbaukomponenten: Bremsscheiben vom Porsche 911 282x24 Teilenummer: 911.351.041.22 Radnaben vom Porsche 911 Teilenummer: 911.341.065.06 Radlager können vom T2B übernommen werden, diese sind gleich wie beim Porsche 911 Bremssättel Porsche Boxter Teilenummer: 996.351.421 + 996.351.422 Red9design Vorderachse Lieferumfang: 2x Bremssattel Halter für VW T2 Bus Kompletter Satz hochfeste Schrauben für beide Seiten Materialzertifikat Es sollten mindestens 16 Zoll Felgen gefahren werden.

€263.53*

Audi A80 90 B4 S2 Brake Caliper Adapter Audi S8 Brake Disc 345x30mm Audi 4-piston Brake Caliper Tuning Adapter Conversion

Brake caliper adapters, front axle, on models Audi S2 and Audi 80 / 90, for conversion to the 4-piston Brembo brake calipers from Audi S8 D2, combined with the Audi S8 brake discs 345x30mm, with original 5x112 or 5x112 bolt/pitch circle conversion. Required components:: brake caliper: Audi 4-piston Audi S8 D2, reference 4D0615107D | 4D0615108D brake disc: Audi S8 345x30mm, reference 4D0615301B Height: 59.5 mm wheel hub from the Audi S2 with 5x112 must be installed (also available in our shop. Item number: 46859) Advantages: significantly better deceleration values than the undersized original brake system high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Delivery: 2x brake caliper adapters for Audi 80, 90, S2, uvm high-strength mounting screws material certificate

€194.27*

Toyota MR2 W3 MRS Brake Caliper Adapter 305x28 Fiat 4-piston Brembo Caliper Alfa Romeo 159 Brera Tuning Adapter Conversion Brake System

Brake caliper adapter, front axle, on Toyota MR2 W3 MRS, for conversion to the Alfa Romeo 159 Brera 4-piston calipers, combined with the Fiat Grande Punto brake discs 305x28 mm. Advantages: high deceleration thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: Alfa Romeo 159 Brera 4-piston, reference 20841701 / 20841702 or 51920591 +52020592 brake disc: Fiat Grande Punto 305x28 mm, reference 51778054 Delivery: 2x brake caliper adapters for Toyota MR2 W3 MRS high-strength mounting screws material certificate

€352.30*

Screw Hexagon Socket Normal Fine Thread M5-M16 High-Strengh 10.9 12.9 DIN933 8.8 Steel

Durchmesser/Größe: M10 x Regelgewinde | Länge: 20mm | Oberfläche: verzinkt 10.9

Screw Hexagon Socket Normal Fine Thread M5-M16 High-Strengh 10.9 12.9 DIN933: size: M5-M16 length: 10-120mm surface: 8.8; 10.9; 12.9

Variants from €0.51*

€2.08*

Ford Focus RS MK2 Bremssatteladapter Audi TTRS Bremsscheibe 370x32 8-Kolben Bremssattel Audi RS4 B7 Umbau Tuning Adapter

Bremssattel Adapter für alle: Ford Focus RS MK2 Ford Focus RS 500 MK2 Ford Focus ST MK2 in Verbindung mit dem Audi RS4 B7 8 Kolben Bremssattel und der 370x32mm Bremsscheibe vom Audi TTRS. Vorteile dieser Bremsanlage: Extreme Verzögerungswerte Durch das im Lieferumfang enthaltene Materialzertifikat kann eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werden Direkt passend an die oben genannten Modelle und daher jederzeit problemlos wieder in den Originalzustand rückrüstbar Unsere EPYTEC Bremssattel Adapter erfordern keine Einsendung von euren Serienteilen, kein umschweißen, umfräsen oder umbohren Benötigte Komponenten: 8-Kolben Bremssättel vom Audi RS4 B7 Teilenummer, links: 8E0615107 / 3D0615107A, rechts: 8E0615108 / 3D0615108A Bremsscheiben vom Audi TTRS 370x32 mm Teilenummer 8J0615301F (RS3 Scheiben passen nicht, andere Topftiefe) Lieferumfang: 2x Bremssattel Adapter für Ford Focus RS MK2 passende Zentrierringe komplettes Befestigungsmaterial Materialzertifikat

€440.56*

Brake Caliper Adapter VW Scirocco Passat EOS Tiguan Audi Q3 TT Seat Wave Brake Disc Audi RS7 356x22 Porsche Cayenne Brake Caliper

Brake caliper adapter, rear axle, on models VW Passat Eos Audi Q3 TT series, for conversion to Porsche Cayenne brake calipers, combined with the Audi RS7 Wave brake discs 356x22 mm. The Porsche calipers are connected to the hydraulics of the vehicle and can thus develop an enormous braking force. However, these do not have handbrake functions. The rear axle of Scirocco R is additionally used for a handbrake caliper adapter. The hydraulic connection is thereby closed with a blind plug / closure cap, thus this serves only as a hand brake caliper. Suitable for the following VW and Seat models with aluminum axle (manufacturer reference: 3C0505435F): VW Eos VW Passat VW Scirocco VW Sharan Audi Q3 Audi TT / TT Roadstar Seat Alhambra Skoda Yeti Advantages of this brake system: top deceleration, without comparison with conventional brake discs better performance supplied material certificate Required components: brake caliper: Porsche Cayenne, rear xale, reference 955.352.421 + 955.352.422 / Brembo reference 20.7673.03 + 20.7673.04 brake caliper mounting bracket: for hand brake, Golf 7R, reference 5Q0615424 / 5Q0615424 brake disc: Audi A6 A7 356x22 mm, reference 4H0 615 601 F Delivery: 2x brake caliper adapters, rear axle, for VW Eos, Passat, Scirocco, Sharan, Audi Q3, Audi TT / TT Roadstar, Seat Alhambra, Skoda Yeti high-strength screw material material Ccertificate installation instructions

€318.47*

Brake Caliper Adapter Audi A6 4b C5 Porsche Boxter 4-piston Audi A8 Brake Disc 335x22mm Conversion Tuning

Brake caliper adapter, rear axle, on models Audi A6 4b, for conversion to the 335x22mm brake discs from the Audi S8, combined with the Porsche Boxter calipers. Advantages of this brake system are: top deceleration system no longer warms up and no more fading thanks to the material certificate supplied with the order, it is possible to register your purchase possible quick and easy assembly with the supplied mounting screws The original handbrake cable can still be used without any changes. Required conversion components: brake disc: Audi S8 335x22mm, refrence 3D0615601 brake caliper: Porsche Boxter, refrence 996.352.421 / 996.352.422 brake caliper mounting bracket: Audi S6, refrence 4B 4D0615425B hand brake: Audi A6, refrence 4B0615423 / 4B0615424 Delivery: 2x brake caliper adapters for the Audi A6 4B complete set of high-strength screws material certificate

€798.15*

Thin and shorter drive shaft right VW Passat Audi A3 TT TSI TFSI 1.8 joint set axle joint

Thin drive shaft for VW Passat Audi A3 TT TSI TFSI and many more. models. Essential if you want to lower your vehicle to the extreme! The shafts are 26 mm thick, are made from a single piece of high-strength steel and are solid shafts, making them suitable for performance-enhanced engines. Suitable for the following cars: Skoda Octavia II Kombi 1.8 TSI Skoda Octavia Superb II Kombi 1.8TSI Skoda Superb II 1.8TSI Seat Leon 1.8 TSI Seat Toledo III 1.8TSI Audi A3 1.8 TFSI Audi A3 Cabriolet 1.8 TFSI Audi TT 2.0 TFSI Audi TT Roadster 1.8 TFSI 2.0 TFSI Audi A3 Sportback 1.8 TFSI VW Passat Variant 1.8TSI VW Passat CC 1.8TSI VW CC 1.8 TSI With our significantly thinner and extremely stable drive shaft, you can avoid the common problemproblem of the drive shaft hitting the body when the vehicle is lowered. It is important that no excess pressure is created in the sleeve when installing the new drive shaft. You can see how to prevent this in our installation instructions (click here).Installing the thinner drive shaft saves you having to rework the body. This saves you time and nerves. Important!! Our short and thin drive shaft is only suitable if the distance from the centre of the wheel to the original mudguard edge is 31.5 cm or less. If this distance is greater in your case, the shaft is too short for your vehicle This is how you measure the distance from the edge of the mudguard to the centre of the wheel: Article data: Installation side: Front axle right Length: 796 mm Thread size: M16x1.5 Sealing ring diameter: 59,5 mm Outer gearing wheel side 36 Joint diameter on gearbox side: 108 mm Number of holes: 6 OE-number: Audi: 8J0407272H, 8J0407272T VW: 1K0407272LF, 5C0407272AC, 8J0407272H Scope of Delivery: 1x thin and short drive shaft / solid shaft including joint set / axle joints for VW Passat Audi A3 TT TSI TFSI and many more. Our drive shafts are registration-free and therefore do not need to be registered.

€385.06*

Details

VW Golf Scirocco Corrado G60 Adapter Porsche Brake Brake Caliper Rear Axle 280x20

Brake caliper adapters with special wheel hub for vehicles with 5x100 or 4x100 bolt / pitch circle in order to install the rear brake calipers of Porsche 996 and Audi S3 8L /VW Golf 4 R32 , combined with the front 280mm Golf G60 brake discs with a total height of 40mm, on the rear axle.In this case, the S3 R32 calipers have only function of hand brake. These are necessary because the Porsche calipers do not have the function of hand brake. Suitable for the following VW und Seat models: Golf 1 (only with our axle pivot - see item 313 in our shop.) Golf 2 3 + GTI+ VR6 Corrado Jetta Passat 35i Scirrocco Vento Polo 6N1 Seat Cordoba Seat Ibiza Seat Toledo Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system better performance supplied material certificate Technics: The Porsche calipers are mounted between the axle beam and the axle stub. The necessary screws are supplied. The adapters for the S3 / R32 caliper are mounted onto the original Golf MK2 /MK3 bracket. With our supplied wheel hubs, the 280 mm brake discs are centered and screwed. The track is wider by about 16 mm per side.The inside of the wheel hub is manufactured like the originals and therefore the wheel bearing remains the same.Not permitted under the STVO (German Road Licensing Law). However, thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehiclesFor the rear axle, we offer brake adapters for conversion to the Porsche brake system, combined with the R32 brake discs. Visit our shop.For vehicles equipped with ABS, the ABS disc of all Golf 3 models can be kept and adjusted exactly on our hub spacers. Required components: brake caliper: Porsche, reference 996.352.421 + 996.352.422 brake caliper: rear axle, Audi S3 8L or VW Golf R32 reference 8N0615423C / 8N0615424C brake caliper mounting bracket: VW Golf R32, reference 8N0615425B brake disc: front, 280mm Golf G60 with a total height of 40mm, reference 535 615 301 Delivery: 2x special wheel hubs with 4x100 bolt pitch circle 2x brake caliper adapters 2x matching centering rings high strength mounting screws material certificate

€509.37*

Toyota Supra JZ80 Brake Caliper Adapter 334x30mm Brake Disc Lexus RC Caliper ZR18 ZL18

Brake caliper adapter, front axle, on models Toyota Supra (platforms JZA80), for conversion to the Porsche or Brembo 6 -piston brake calipers ZR18, combined with the Lexus RC brake discs 334 x 30mm.. The brake calipers were installed in the Porsche Cayenne, VW Touareg and Q7. Required components: brake disc: Audi S4 A4 A5 330x22mm, reference 4H0 615 601 H brake caliper. original VW T5 transporter, reference 7H0 615 423 / 7H0 615 424 brake caliper mounting bracket: original VW T5, reference 7H0 615 425 Delivery: 2x brake caliper adapters for Toyota Supra platforms: JZA80 high-strength mounting screws Material certificatet

€315.67*

Brake Caliper VW Golf MK2 MK3 Corrado G60 Conversion Lucas Girling 54 ATE Front Axle Left

A new brake caliper, left, for Golf MK2, MK3, G60 Corrado and many other models. The brake caliper is suitable in connection with many brake caliper adapters from us. Suitable manufacter reference: 443 615 123 A 857 615 123 Delivery: 1x brake caliper, left, on VW Golf MK2 MK3 Corrado G60 consersion / ATE / Girling 54

€71.47*

Brake Caliper Adapter BMW E46 M3 Z4 Brake Disc BMW E92 M3 360x30 Alfa Romeo giulia quadrifoglio Brembo 6-piston Brake Caliper

Brake caliper adapter, front axle, on models BMW E46 M3, for conversion to the die Alfa Romeo giulia quadrifoglio Brembo 6-piston calipers, combined with the 360x30mm brake discs BMW E92 M3. Suitable for the following vehicles: BMW E46 M3 Coupe BMW Z4 Roadster M Advantages of this brake system: top deceleration, without comparison with conventional brake discs easy assembly better performance supplied material certificate can easily be restored to the original state Required components: brake caliper: Alfa Romeo giulia quadrifoglio Brembo 6-piston Brembo, reference 20C32705 brake disc: BMW E92 M3 360x30mm , reference 2283385 / 2283386 Delivery: 2x brake caliper adapters for BMW E46 M3 and Z4 Radster M high-strength mounting screws material certificate

€178.34*

Audi A6 C4 Intermediate Part Valve Brake Line Hose M10x1 4A0611789C Spare Part High Quality

Intermediate piece / connection for Audi A6 C4, made of stainless steel. manufacturer number: 4A0611789C The Audi A6 C4 has an aluminum adapter installed between the rigid brake line and the brake hose, which unfortunately corrodes and dissolves very quickly. This part is very important for the brake balance and ABS and therefore cannot simply be left out.Since the component is no longer manufactured by Audi and is no longer available as an accessory, we have reproduced an original part.Our intermediate piece is made of stainless steel and thus no more corrosion or the like this. Advantages: high quality material used (stainless steel), original aluminum resistanter than original part replica of the original part, OE number: 4A0611789C, as it is no longer produced by Audi Delivery: 1x intermediate piece / connection for Audi A6 C4 stainless steel, manufacturer number: 4A0611789C

€31.99*

Thin right drive shaft VW Golf 4 Bora 1.8T V5 Audi A3 8L 108er

Fine thin drive shaft for many models VW VW Golf 4, Bora 1.8T V5 and Audi A3 Modelle with 108 flange. Absolutely necessary when lowering!The shaft is made of high-strength steel and manufactured in one piece and is a complete drive shaft. Thus also suitable for high-performance engines.Thanks to our thin and extremely stable transmission / drive shaft, you avoid many problems at the body that usually appear during a chassis lowering. With the installation of our drive shaft, you avoid many modifications and you save time.It is important that when installing the new drive shaft, no excess pressure is created in the sleeve. In our installation instructions you can see how to prevent this (click here). By installing the thinner drive shaft, you save yourself having to rework the body. This saves you time and nerves. Suitable for vehicles with a fender edge over 32cm. Are you at the fender edge under 32cm you need this drive shaft (click here) Article data: assembly side front axle right length 804 mm thread M20x1.5 external toothing wheel side 36 sealing ring diameter 53 mm drilling-Ø 10,5 mm number of holes 6 for shaft diameter 28 mm Bolt circle Ø 94 mm joint diameter wheel side 90 mm Joint diameter on the transmission side 108 mm chassis for vehicles with low-profile chassis manufacturer release SPECIAL PARTS Delivery: 1x fine thin drive shaft for VW Golf MK4, Bora 1.8T V5, Audi A3 8L with 108th. flange Our drive shafts are registration-free and therefore do not have to be registered.

€237.26*

Details

Brake Caliper Adapter Mercedes W639 W447 Vito Viano 8-piston Brake Caliper W219 CLS 55 AMG 375x36mm Mercedes GL Brake Disc

Brake caliper adapter, front axle, on models Mercedes W639 Viano , for conversion to the Mercedes W219 CLS 55 AMG 8-piston Brembo brake caliper, combined with the 375x36 brake discs of Mercedes ML / GL 350. Suitable for following vehicles: Mercedes W639 Viano / Vito Mercedes W447 Viano / Vito Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: Mercedes W219 CLS 55 AMG 8-piston, reference A0034200983 / A003420108 ; Brembo reference 20.7919.01 / 20.7919.02 Brake pads part number: A0034207120 brake disc: Mercedes Benz GL - Klasse 375x36mm, reference 166 421 0912 Delivery: 2x brake caliper adapters for Mercedes W639 Viano high-strength mounting screws material certificate

€176.30*

Brake Caliper Adapter VW Passat 3C YoC 2017 Ceramic Brake Disc 4K0615302D Audi RS5/RS7 Brake Caliper Audi RS5/RS7 B40401-01 1A BMS VW AG

Brake caliper adapter on models VW Passat B6 B7 B8, for conversion to the Audi RS5 / RS7 ceramic brake system. Suitable for the following vehicles with installed wheel bearing housing, reference 3C0 407 253F: VW Passat B6 3C VW Passat B6 Variant 3C5 VW Passat B6 CC VW Passat B7 Variant VW Passat B7 Alltrack VW Passat B8 VW CC B7 VW Sharan Advantages of this brake system: thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: Audi RS7 A7 RS5, reference 4H0615107D / 4H0615106D brake disc: ceramic Audi RS5 400x38mm, reference 4K0615302D Delivery: 2x brake caliper adapters for VW Passat B6 B7 B8 CC Sharan material certificate

€263.47*

Brake Caliper Adapter Mercedes E klasse W124 W201 W202 W208 R170 Porsche 996 Brake Caliper 300x22mm Brake Disc C 43 AMG Tuning Adapter

Brake caliper adapter, rear axle, on models Mercedes W124 260E, for conversion to the Mercedes W202 C 43 AMG brake discs 300x22, combined with the Porsche Boxter 4-piston Brembo brake calipers. Suitable for all vehicles with steering knuckles, reference A2023509508 / A2023509408: Mercedes W124 Mercedes W202 Mercedes W201 Mercedes W208 Mercedes C208 Mercedes A208 Mercedes R170 Advantages of this brake system: thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: Porsche 996 4-piston, reference 996.352.421 / 422 - 986.352.421 / 422 brake disc: Mercedes W202 C 43 AMG 300x22mm, reference A2104230812 Delivery: 2x brake caliper adapters Mercedes W124, W201, W202, W208, R170, etc. complete set of high-strength screws material certificate

€205.08*

Brake Caliper Adapter Porsche 996 986 Targa Boxter Cayman Gt4 380x34mm Brake Disc Porsche 997 GT3 RS Brembo 6-piston Brake Caliper

Brake caliper adapter on models Porsche 996 986 Targa Boxter, for conversion to the Cayman Gt4 380x34mm brake discs, combined with the Porsche 997 GT3 RS Brembo 6-piston brake calipers. The adapters are suitable for the following vehicles with steering knuckles manufacturer number: 996341157 / 996341155: Porsche 996 Porsche 996 Porsche 986 Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: Porsche 997 GT3 RS Brembo 6-piston, reference left 99735143192 / right 99735143292 brake disc: Cayman Gt4 380x34mm, reference left 98135140580 / right 98135140680 Delivery: 2x brake caliper adapters for Porsche 996 986 Boxter Targa high-strength mounting screws material certificate

€199.35*

Drive Shaft Left Front VW Golf Mk5 Passat Skoda Superb 2 Wagon Estate

Drive shaft forVW Golf Mk5, Audi A3 and many more models. Absolutely necessary when lowering! The shaft is made of high-strength steel and manufactured in one piece and is a complete drive shaft. Thus also suitable for high-performance engines. Thanks to our thin and extremely stable transmission / drive shaft, you avoid many problems at the body that usually appear during a chassis lowering. It is important that when installing the new drive shaft, there is no overpressure in the sleeve. In our installation instructions you can see how you can prevent this (click here) By installing the drive shaft, you save yourself reworking the body. That saves you time and nerves.. Technical data: CriterionDetail assembly side front axle left length 488 mm drilling-Ø 10.2 mm thread M16x1.5 external toothing wheel side 36 seal ring diameter 59.5 mm number of drill holes 6 PCD/bolt circle-Ø 94 mm Suitable for the following vehicles: Golf Mk5 Passat Variant Touran Audi A3 Skoda Superb 2 wagon / estate Manufacturer reference: 1K0407271BJ AUDI 1K0407271EE AUDI 1K0407271ES AUDI 1K0407271HM AUDI 1K0407271BJ SEAT 1K0407271EE SEAT 1K0407271ES SEAT 1K0407271HM SEAT 1K0407271BJ SKODA 1K0407271EE SKODA 1K0407271ES SKODA 1K0407271HM SKODA 1K0407271ES VAG 1K0407453BX VAG 1K0407271BJ VW 1K0407271BN VW 1K0407271EE VW 1K0407271ES VW 1K0407271HM VW 1K0407271NP VW 1K0407271NQ VW 1K0407451DX VW 1K0407451TX VW 1K0407761HX VW 3AA 407 271 VW 3C0 407 271S VW 3C0 407 451AX VW 3C0 407 451FX VW 3C0407271AJ VW Delivery: 1x drive shaft / solid shaft including joint kit / axle joints for VW Golf Mk5, Audi A3 and many more models Our drive shafts are free of registration and therefore do not have to be registered.

€106.05*

Details

Braided Steel Brake Line Fixation Brake Hose Bracket Straight Rubber

Straight mounting/fixation bracket with rubber for steel braided brake lines and brake hoses.You can remove the rubber ring from the holder for subsequent installation of the brake line. Then cut open the rubber ring at the bottom and insert the brake line. Then fasten the rubber ring, including the brake line, back in the bracket.The mounting/fixation brackets are made of steel and can be welded or screwed to all bodies because they are universally suitable. Technical data: top hole: 8mm bottom hole 11m Width: 24mm Height: 47mm Delivery: 1x straight fixation for steel braided brake line with rubber

€7.97*

Steel Braided Brake Line Fixation Holder Mounting Fastening Brake Hose Bracket Brake Line Straight Rubber

Straight mounting bracket / fixation holder with rubber for steel braided brake lines and brake hoses.You can remove the rubber ring from the bracket for subsequent installation of the brake line. Then cut open the rubber ring at the bottom and lead the brake line through. Then fix the rubber ring, including the brake line, back in the holder.The fixation holders are made of steel and can be welded or screwed to all bodies because they are universally suitable. Technical data: upper hole: 8mm bottom hole: 7mm width: 18mm height: 40mm Delivery: 1x straight fixation holder / mounting bracket / for steel braided brake line with rubber

€6.42*

Braided Steel Brake Line Fixation Brake Hose Bracket Bent Curved Rubber

Bent curved mounting/fixation bracket with rubber for steel braided brake lines and brake hoses.You can remove the rubber ring from the holder for subsequent installation of the brake line. Then cut open the rubber ring at the bottom and insert the brake line. Then fasten the rubber ring, including the brake line, back in the bracket.The mounting/fixation brackets are made of steel and can be welded or screwed to all bodies because they are universally suitable. Technical data: top hole: 8mm bottom hole 11m bottom length: 30mm top length: 21mm width: 24mm Delivery: 1x bent curved fixation for steel braided brake line with rubber

€6.80*

Braided Steel Brake Line Fixation Brake Hose Bracket Bent Curved Rubber

Bent curved mounting/fixation bracket with rubber for steel braided brake lines and brake hoses.You can remove the rubber ring from the holder for subsequent installation of the brake line. Then cut open the rubber ring at the bottom and insert the brake line. Then fasten the rubber ring, including the brake line, back in the bracket.The mounting/fixation brackets are made of steel and can be welded or screwed to all bodies because they are universally suitable. Technical data: top hole: 8mm bottom hole 7m bottom length: 20mm top length: 23mm width: 18mm Delivery: 1x bent curved fixation for steel braided brake line with rubber

€7.50*

Retaining Ring Supporting Ring Grommet Rubber Braided Steel Brake Line Brake Hose

Rubber retaining / closing ring to protect and reinforce braided steel brake lines or brake hosesAfter the installation of the brake line, you can cut open the rubber ring at the bottom and insert the brake line. Technical data: external diameter: 25mm internal diameter: 9mm diameter inner ring: 16mm width: 16mm Delivery: 1x retaining ring / supporting ring made of rubber for braided steel brake line

€3.20*

Retaining Holding Fixation Ring Grommet Rubber Steel Braided Brake Line Brake Hose

Retaining / holding / fixation ring made of rubber to protect and strengthen steel braided brake lines or brake hosesFor subsequent installation of the brake line, you can cut open the rubber ring at the bottom and lead the brake line through. Technical data: external diameter: 24mm internal diameter: 7.5mm diameter inner ring: 16mm width: 11mm Delivery: 1x retaining / holding / fixation ring made of rubber for steel braided brake line

€4.01*

Lightened Flywheel Fiat 20V Turbo Clutch steel light

Lightened high-strength flywheel made of chrome molybdenum Suitable for Fiat Coupe 2,0l 20V turbo (162 kW /220 PS ) Advantages of our lightened flywheel: our flywheel weighs only 4.0 kg all our flywheels are made of chrome moly steel with quality G 1.75, extremely suitable for high-speed motors recognized for unlimited HP significantly better acceleration due to less inertia the engine runs faster, no loss of performance. suitable for motorsports, racing or serial vehicles lower fuel consumption significant reduction of the turbo lag precision balancing, bearings are less affected, finely balanced according to DIN ISO 1940 including ring gear suitable for either a standard clutch or a high-performance clutch Our flywheels are registration-free as they have no direct effect on the actual performance. Delivery: 1x lightened high-strength flywheel made of chrome molybdenum for all 2,0l 20V 16V turbo engines Installation instructions Our lightened flywheels are registration-free and therefore do not need to be registered.

€189.35*

Lightened Flywheel VW Golf Mk7R Arteon Passat Audi A3 DSG DQ381 Engine 7-speed 06K105266AC Steel Light

Lightened high-strength flywheel made of chrome molybdenum, suitable for the 2.0 TSI and 2.0 TDI engines, with 7-speed DSG gearbox for the DQ 381 series. The flywheel has 8 mounting holes. Suitable for front and all-wheel drives: VW Golf Mk7R VW Golf Mk7 Variant VW Passat Alltrack VW Tiguan Allspace VW Arteon VW Passat Variant VW T-ROC VW Touran Audi A3 Audi A3 Cabriolet Audi A3 Limousine Audi A3 Sportback Audi Q2 Audi TT Audi TT Roadster Seat Ateca Seat Leon Seat Leon SC Seat Leon ST Seat Tarraco Skoda Karoq Skoda Octavia III Skoda Octavia III estate Skoda Superb III Skoda Superb III estate Manufacturer reference: 06K105266AC Advantages of our lightened flywheel: our flywheel weighs only 8.2 kg, the standard wheel over 12.0 kg it is not necessary to send us the original engine flywheel all our flywheels are made of chrome moly steel with quality G 1.75, extremely suitable for high-speed motors recognized for unlimited HP significantly better acceleration due to less inertia the engine runs faster, no loss of performance. suitable for motorsports, racing or serial vehicles lower fuel consumption significant reduction of the turbo lag precision balancing, bearings are less affected, finely balanced according to DIN ISO 1940 including ring gear suitable for either a standard clutch or a high-performance clutch Our flywheels are registration-free as they have no direct effect on the actual performance Delivery: 1x Lightened flywheel for all models VW Golf Mk7R VW Passat Alltrack, VW Tiguan Allspace, Audi A3 and many more, with 2.0 TSI and 2.0 TDI engines installation instructions Our lightened flywheels are registration-free and therefore do not need to be registered.

€345.32*

VW T3 Transporter Brake Caliper Adapter before Year of Manufacture 1986 Audi Ate 57 Brake System 312x25 Brake Front Axle

Brake caliper adapter including wheel hub, front axle, on model T3 transporter, for converstion to the internally ventilated 312x25mm brake discs, combined with the Audi A6 calipers. Suitable for VW T3 transporter built before 1986 with M12 screw mount on the axle Advantages of this brake system are: top deceleration system no longer warms up and no more fading very cheap components. you can find second-hand caliper from 49.- € / new from 70.-€ thanks to the material certificate supplied with the order, it is possible to register your purchase quick and easy assembly with the supplied mounting screws Required components: brake caliper: Audi 100/A6 C4 Girling/ ATE 57, reference 4A0615123A + 4A0615124A brake disc: Audi A4 quattro, Audi A6 312x25 mm, reference 4B0 615 301 A brake caliper mounting brackets that were installed with the 288 brake system. (required because of the shorter design of the bracket) wheel hubs to center the brake disc are also available in our shop. At least 16 inch rims should be used so that the diameter of the brake disc fits. Delivery: 2x brake caliper adapters for VW T3 transporter before year 1986 with M12 screw mount on the axle matching centering rings including high-strength screw material 2x T3 transporter wheel hubs for the front axle.

€323.72*

Brake Caliper Adapter Audi RS4 B5 Ceramic Brake Disc 420x40 10-piston Brake Caliper RS6 C7 Brake System Tuning Adapter

Brake caliper adapter, front axle, on models Audi RS4 B5, for conversion to the 10-piston brake calipers from the Audi RS6 C7, combined with the ceramic brake discs 420x40mm from Audi RS6 C7. Suitable for the following vehicles: Audi RS4 B5 Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: Audi RS6 C7 10-piston original Akebono Part Number: (4M8615107B / 4M8615108B) brake disc: ceramic Audi RS6 C7 420x40 mm, reference 4G0.615.302.J Delivery: 2x brake caliper adapters for Audi A4 B5 buschings for the 365 disc material certificate stress analysis / FEM calculation for registration high-strength screw material At least 21 inch rims must be used.

€275.04*

Inner Cylinder Head Bolt with Hexagon Socket Normal Fine Thread Screw M5-M16 High-Strength 10.9 12.9 DIN912 8.8 Steel

Durchmesser/Größe: M12 x 1.5 | Länge: 70mm | Oberfläche: blank 10.9

Cylinder head bolt with hexagon socket, normal and fine thread High-strength DIN912 screws: size: M5-M16 length: 16-180mm surface: 8.8; 10.9; 12.9

Variants from €0.56*

€4.31*

Opel Omega B 3.0 2.5 V6 Caravan Brake Caliper Adapter Brake Disc Audi RS6 390x36mm 6-piston Brake Caliper Mercedes SL63 AMG

Brake caliper adapter, front axle, on models Opel Omega B V6, for conversion to the Mercedes Benz GLS AMG 6-piston brake calipers, combined with the Wave brake discs 390x36mm from the Audi RS6 Advantages of this brake system: top deceleration, without comparison with conventional brake discs easy assembly better performance supplied material certificate can easily be restored to the original state Required components: brake caliper: Mercedes S / SL63 / 65 AMG 6-piston, reference A2314212698 / Brembo reference 20.A495.04 brake disc: Wave 390x36mm from Audi RS6, reference 4GO.615.301.E Delivery: 2x brake caliper adapters for Opel Omega B V6 3.0 2.5 Omega B Caravan including high-strength screw material material certificate installation instructions

€358.53*

Brake Caliper Adapter BMW E36 Z3 Porsche Boxter 996 4-piston Brake Caliper Mercedes Brake Disc 330x28 Tuning Adapter

Brake caliper adapter, front axle on models BMW E36 / Z3, for conversion to the 4-piston brake calipers of the Porsche 996, combined with the 330x28mm& brake discs from the Mercedes Benz C-Class (W203). Advantages of this braking system: top deceleration, without comparison with conventional brake discs easy assembly better performance supplied material certificate can easily be restored to the original state Required components: brake caliper: Porsche 996 series, Porsche original reference 996.351.425/426 (only 100% suitable with the specified Porsche calipers) brake disc: Mercedes Benz 330x28mm W203, reference A2034211312 Hub bore must be adjusted to 79.00 mm and the bolt circle can be re-drilled to 5x120- Available in our house by EPYTEC, click here Delivery: 2x brake caliper adapters for the front axle of the BMW E36 including high-strength screw material material certificate installation instructions

€210.42*

Brake Caliper Adapter Mercedes W639 W447 Vito Viano 6-piston Brake Caliper W219 CLS 55 AMG 390x36mm Mercedes GL Brake Disc

Brake caliper adapter on modles Mercedes W639 Viano, for conversion to the Mercedes W212 AMG 6-piston Brembo brake calipers, combined with the brake discs 390x36 from the Mercedes W205 C63 AMG. Suitable for the following vehicles: Mercedes W639 Viano / Vito Mercedes W447 Viano / Vito Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: Mercedes W212 W218 AMG 6-piston, reference A2314212698 ; Brembo reference : 20.A495.04 brake disc: Mercedes Benz W205 W213 390x36mm, reference : A2314211812 or Brake disc from Mercedes GLS 63 AMG (X166) from the front axle in 390x36mm Part Number: A2304211212 Brembo No: 09.9313.33 Delivery: 2x brake caliper adapters Mercedes W639 Viano high strength mounting screws material certificate

€229.60*

Brake Caliper Adapter Audi S1 A3 S3 RS3 8V Golf Mk7 Seat Leon Skoda Octavia Brake Disc 356x22 Audi A6 original Brake Caliper

Brake caliper adapter, rear axle (manufacturer reference: 5Q0505435), on the models listed below, for conversion to the brake discs 356x22 mm A6 or RS7, combined with the original brake calipers. Suitable for the following vehicles with aluminum axle, manufacturer reference: 5Q0505435: Audi S1 Quattro Audi A3 8V Quattro Audi S3 8V Quattro Audi RS3 8V Quattro Golf Mk7 Quattro Golf Mk7R Quattro Seat Leon ST Quattro Skoda Octavia 3 Quattro Advantages of this brake system: high deceleration thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake disc: internally ventilated 356x22 Audi A6, reference 4H0 615 601 F / or the perforated Wave brake disc from the Audi RS7 356x22 mm, reférence 4G8.615.601 brake caliper: original Golf Mk7 Audi S3 RS3, reférence 8V0615425B brake pad: original, reférence 8V0 698 151G Info: If you want to drive with a perforated brake disc, the Wave brake disc from the Audi RS7 with 356x22mm (reference: 4G8.615.601) also fits, since the Audi S6 S7 S8 brake disc is not perforated. The brake discs are otherwise exactly identical in terms of dimensions. Delivery: 2x brake caliper adapters for VW Golf Mk7, Audi S1, Audi A3, S3, RS3, Seat Leon ST, Skoda Octavia 3, etc. high strength mounting screws centering rings material certificate

€163.21*

BMW E36 M3 Z3 M3 Brake Caliper Adapter 996 GT3 6-piston Brake Caliper 360x30mm Brake Disc BMW E92 Tuning Adapter

Brake caliper adapter, front axle, on models BMW E36 M3 and Z3 M3, for conversion to the Porsche 996 GT3 6-piston brake caliper, combined with the 360x30mm brake disc from the BMW E92 M3. Advantages of this brake system: top deceleration, without comparison with conventional brake discs easy assembly better performance supplied material certificate can easily be restored to the original state Required components: brake caliper: Porsche 996 GT3 6-piston, reference: 996.351.432 and 996.351.431 brake disc: BMW E92 M3 360x30mm, reference 2283385 / 2283386 / 34112283386 / 34112283385 Delivery: 2x brake caliper adapters for BMW E36 M3 and Z3 M3 6mm spacer between wheel hub and brake disc high-strength mounting screw material material certificate stress analysis / FEM calculation for registration

€281.66*

Brake caliper adapter BMW 1 series 2 series 3 series 4 series F20 F21 F22 F23 F30 F31 F32 F33 F34 F36 convertible coupe BMW M2 M3 380x30 brake disc 4 piston brake caliper tuning adapter

Brake caliper adapter, front axle, on models series 1, 2 BMW F20, F21, F22 and F23, as well as the 3 and 4 series F30, F31, F32, F33, F34, F36 for conversion to the BMW F20 M 4-piston brake calipers, combined with the 380x30mm BMW M2 M3 M4 brake discs to drive.The BMW F20 M 4-piston brake calipers are simply screwed to the original axle mounting support instead of the original caliper using our tuning adapter. Advantages of this brake system: top deceleration, without comparison with conventional brake discs easy assembly better performance supplied material certificate can easily be restored to the original state Required components: brake caliper: BMW F20 M 4-piston, reference left 34116799465 / right 34116799466 brake disc: BMW M2 M3 M4, front axle, 380x30mm, reference left 34112284809 / right 34112284810 Brake pad: reference 34112284969 Delivery: 2x brake caliper adapters for series 1, 2 BMW F20, F21, F22 and F23 high-strength mounting screw material material certificate Stress analysis / FEM calculation for registration car registration certificate

€161.21*

Brake Caliper Adapter Mercedes W639 W447 Vito Viano 6-piston Brake Caliper W205 C63 AMG 390x36mm Brake Disc Mercedes ML 63 W166

Brake caliper adapter, front axle, on models Mercedes W639 Viano, for conversion to the Mercedes C63 AMG W205 6-piston Brembo brake calipers, combined with the 390x36 brake discs from the Mercedes ML 63 W166. Suitable for the following vehicles: Mercedes W639 Viano / Vito Mercedes W447 Viano / Vito Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: Mercedes C63 AMG W205 6-piston, reference 2054216998 / 2054217098 brake disc: Mercedes Benz ML 63 W166 - Klasse 390x36mm, reference A1664210512 Delivery: 2x brake caliper adapters Mercedes W639 Viano Vito high-strength screw material material certificate

€197.67*

Inner Cylinder Head Bolt with Hexagon Socket Normal Fine Thread Screw M5-M16 High-Strength 10.9 12.9 DIN912 8.8 Steel

Durchmesser/Größe: M14 x 1.5 | Länge: 110mm | Oberfläche: verzinkt 12.9

Cylinder head bolt with hexagon socket, normal and fine thread High-strength DIN912 screws: size: M5-M16 length: 16-180mm surface: 8.8; 10.9; 12.9

Variants from €0.56*

€11.77*

Screw Hexagon Socket Normal Fine Thread M5-M16 High-Strengh 10.9 12.9 DIN933 8.8 Steel

Durchmesser/Größe: M10 x 1.25 | Länge: 25mm | Oberfläche: blank 10.9

Screw Hexagon Socket Normal Fine Thread M5-M16 High-Strengh 10.9 12.9 DIN933: size: M5-M16 length: 10-120mm surface: 8.8; 10.9; 12.9

Variants from €0.51*

€1.69*

Inner Cylinder Head Bolt with Hexagon Socket Normal Fine Thread Screw M5-M16 High-Strength 10.9 12.9 DIN912 8.8 Steel

Durchmesser/Größe: M10 x 1.25 | Länge: 70mm | Oberfläche: verzinkt 10.9

Cylinder head bolt with hexagon socket, normal and fine thread High-strength DIN912 screws: size: M5-M16 length: 16-180mm surface: 8.8; 10.9; 12.9

Variants from €0.56*

€5.61*

Bremssatteladapter Mercedes E55 E63 W211 C219 SL63 SL55 R230 CLS 63 AMG Bremsanlage 8 Kolben Bremssattel

Bremssattel Adapter für die Vorderachse des Mercedes Benz E55 AMG, E63 W211, C219, CLS 55 AMG, CLS 63 AMG, SL 63, 55 R230, um die Mercedes Benz GLS 63 Bremsscheibe 390x36mm mit dem 8-Kolben Bremssattel vom Mercedes SL55 AMG zu fahren. Vorteile dieser Bremsanlage: Top Verzögerungswerte, kein Vergleich zu den herkömmlichen Bremsscheiben einfache Montage ein Muss bei Leistungssteigerung Materialzertifikat wird mitgeliefert einfach wieder in original Zustand rückrüstbar Benötigte Komponenten: Mercedes SL55 AMG 8-Kolben Bremssättel Teilenummer: A0034203283 / Brembo Nr: 20.7919.02 Bremsscheibe vom: Mercedes GLS 63 AMG (X166) von der Vorderachse in 390x36mm Teilenummer: A2304211212 Brembo Nr: 09.9313.33 oder Mercedes AMG C63 S (S205) von der Vorderachse in 390x36mm Teilenummer: A2314211812 Lieferumfang: 2x Bremssattel Adapter für Mercedes Benz E55 AMG, E63 W211, C219, CLS 55 AMG, CLS 63 AMG, SL 63, 55 R230 inklusive hochfestes Schraubenmaterial Materialzertifikat

€231.00*

Mercedes Benz W213 S213 E220 Bremsanlage 390x36 AMG Bremssattel Adapter 6-Kolben AMG Tuning Adapter

Bremssattel Adapter für die Vorderachse vom Mercedes Benz E-Klasse W213 / S213 ( Radlagergehäuse : OE: 2133324700 ) um die Mercedes Benz C63 W204 AMG Bremsscheibe 390x36 in Verbindung mit den Mercedes Benz 6-Kolben Bremssättel zu fahren.Endlich ein Adapter um auf die 390mm Bremsscheibe vom AMG upgraden zu können. Da man die originalen Halter nicht einzeln bekommt, sind diese extrem teuer. Mit unserem Adapterkit kannst du die 390mm Scheibe Plug and Play verbauen. Vorteile dieser Bremsanlage: Top Verzögerungswerte, kein Vergleich zu den herkömmlichen Bremsscheiben einfache Montage ein Muss bei Leistungssteigerung Materialzertifikat wird mitgeliefert einfach wieder in original Zustand rückrüstbar Benötigte Komponenten: Mercedes CLS 63 AMG (C218) 6-Kolben Bremssättel Teile Nr. A2044214798 und A2044214898, Bremsbo Teilenummer: 20.A495.04 Bremsscheibe vom Mercedes CLS 63 von der Vorderachse in 390x36mm Teilenummer: A2304211212 Bremsscheibe vom Mercedes AMG C63 S (S205) von der der Vorderachse in 390x36mm Teilenummer: A2314211812 Lieferumfang: 2x Bremssattel Adapter für Mercedes Benz W213 / S213 inklusive hochfestes Schraubenmaterial Materialzertifikat

€231.00*

Bremssatteladapter Ford Capri Escort Wilwood Dynalite Bremssattel Bremsscheibe 245x20 Bremsanlage

Bremssatteladapter für die Vorderachse um die original Capri 2,8i Bremsscheibe 245x20mm in Verbindung mit dem Wilwood Dynalite Bremssattel fahren zu können Passend an folgenden Fahrzeugen: Ford Capri Mk1 ausser 3.0 V6 Ford Capri Mk2 ausser 3.0 V6 Ford Capri Mk3 ausser 3.0 V6 Ford Escort Mk1 Twin Cam Ford Escort Mk1 Mexico Ford Escort Mk1 RS1600 Ford Escort Mk1 RS2000 Ford Escort Mk2 RS Mexico Ford Escort Mk2 RS1800 Ford Escort Mk2 RS2000 Vorteile: Extreme Verzögerungswerte auch in Verbindung mit unsere Hinterachsbremsanlage Durch das im Lieferumfang enthaltene Material Zertifikat kann eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werden Direkt passend an oben genannte Modelle und daher jederzeit problemlos wieder in den Originalzustand rückrüstbar Unsere EPYTEC Bremssattel Adapter erfordern keine Einsendung von deinen Serienteilen, kein Umschweißen - Umfräsen oder Umbohren. Benötigte Komponenten: Bremsscheiben vom Ford Capri 2,8i 245x20, Teilenummer: 1595647 Wilwood Dynalite Bremssättel, Teilenummer: 120-6806 Lieferumfang: 2x Bremssatteladapter für Ford Capri 1, 2 und 3 sowie Escort 1, 2 RS 2000 RS1600 Materialzertifikat

€137.17*

Bremssatteladapter Mercedes W639 W447 Vito Viano 6-Kolben Bremssattel W205 C63 AMG 360x36mm Bremsscheibe Mercedes W212 E-Klasse

Bremssatteladapter für den Mercedes W639 Viano auf die Mercedes C63 AMG W205 6-Kolben Brembo Bremssättel in Verbindung mit den Bremsscheiben 360x36 vom Mercedes W212 E-Klasse. Die Adapter passen für folgende Fahrzeuge: Mercedes W639 Viano / Vito Mercedes W447 Viano / Vito Vorteile dieser Bremsanlage: durch das im Lieferumfang enthaltene Materialzertifikat kann eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werden direkt passend an die oben genannten Modelle und daher jederzeit problemlos wieder in den Originalzustand rückrüstbar unsere EPYTEC Bremssattel Adapter erfordern keine Einsendung von Euren Serienteilen, kein Umschweißen, Umfräsen oder Umbohren. Benötigte Komponenten: Mercedes C63 AMG W205 6-Kolben Bremssättel Teilenummer: 2054216998 / 2054217098 / A2054216798 / A2054216798 / 2054210400 / 2054210300 Bremsbeläge Teilenummer: A0004209400 Bremsscheiben vom Mercedes Benz W212 E-Klasse 360x36mm Teilenummer: A2044211212 Lieferumfang: 2x Bremssatteladapter Mercedes W639 Viano Vito hochfestes Schraubenmaterial Materialzertifikat

€214.47*

VW Golf MK7 Touran Audi A3 Q3 Brake Caliper Adapter 360x32 Disc Audi RS4 B5 Brembo 8-piston Brake Caliper Audi RS5 Brake System

Brake caliper adapter, front axle, on models VW Golf MK7 Audi A3 for conversion to the Audi RS4 RS5 8-piston Brembo calipers, combined with the Audi RS4 B5 360x32mm brake discs. Suitable for the following vehicles with aluminum axles: Audi A3 Audi A3 Cabriolet Audi Q2 VW Arteon VW Golf Sportsvan VW Golf MK7 VW Golf 7 Variant VW Passat Variant VW Tiguan VW Touran Seat Ateca Seat Leon Seat Leon ST Skoda Octavia 3 Skoda Octavia 3 estate Skoda Superb 3 Skoda Superb estate 3 Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: Audi RS4 RS5 8-piston original Brembo, reference left 8E0615107 right E0615108 brake disc: Audi RS4 B5 360x32mm, reference 8D0615302B or RS4 B7 365x34mm, reference8E0615301AB (when the 365 discs are installed, it is necessary to place washers on the brake caliper mount so that the brake disc size is compensated) Delivery: 2x brake caliper adapters for VW Golf MK7 Audi A3 series material certificate high-strength mounting screws

€198.40*

Brake caliper adapter OPEL Astra G OPC I OPC II Zafira A Porsche Cayenne ZR18 ZL18 Brake 360x32 Brake disc Mercedes CLK

Brembo brake caliper adapter to be able to use the Porsche Cayenne ZR18 / ZL18 6-piston brake caliper in conjunction with the Mercedes CLK 360x32mm brake discs on the front axle of the Opel Astra G OPC. The adapters fit the following vehicles with wheel bearing housing part number: 5308012 / 5308013 : Opel Astra G CC Opel Astra G Caravan Opel Astra G Limousine Opel Zafira A Opel Astra G Coupe Opel Astra G Cabrio Advantages: Thanks to the material certificate included in the scope of delivery, registration via individual approval is also possible for series vehicles Fits directly to the above-mentioned models and can therefore be easily retrofitted to the original condition at any time Our EPYTEC brake caliper adapters do not require your standard parts to be sent in, no rewelding, re-milling or re-drilling. Required components: Brake calipers Porsche Cayenne ZR18 ZL18 part no. 95535142153 / 95535142253 Brake discs from Mercedes CLK 361x32 mm part number 2094210112 Brake disc must be rebored to 5x110 and the hub diameter must be turned up to 70mm (can also be done in-house) the brake pads must be machined approx. 4mm on the outer edge, otherwise they will protrude beyond the brake disc. Scope of delivery: 2 x brake caliper adapters for the Opel Astra G CC, Caravan, Saloon, Coupe, Convertible, Zafira A Set of high-strength bolts Template to check whether the brake system fits under your wheel rim Material certificate The minimum tyre size must be 19 inches.

€222.46*

Mercedes Benz C63 W205 W212 Bremsanlage 390x36 AMG Bremssattel Adapter 6-Kolben

Bremssattel Adapter für die Vorderachse des Mercedes Benz C63 W205 und W212 E63 AMG um die Mercedes CLS63 AMG Bremsscheibe 390x36 in Verbindung mit den original verbauten Mercedes 6-Kolben Bremssättel zu fahren.Der Adapter passt mit beiden originalen Bremssätteln, welche beim Fahrzeug verbaut worden sind. Bis zum Baujahr 08/2017 wurde der Akebonobremssattel verbaut, ab dem Baujahr 09/2017 wurde dann standardmäßig der Brembobremssatttel des C 63 AMG (205) verbaut.Endlich ein Adapter um von der original 360mm auf die 390mm Bremsscheibe vom AMG upgraden zu können. Da man die originalen Halter nicht einzeln bekommt, sind diese extrem teuer. Mit unserem Adapterkit kannst du die 390mm Scheibe Plug and Play verbauen. Vorteile dieser Bremsanlage: Top Verzögerungswerte, kein Vergleich zu den herkömmlichen Bremsscheiben einfache Montage ein Muss bei Leistungssteigerung Materialzertifikat wird mitgeliefert einfach wieder in original Zustand rückrüstbar Benötigte Komponenten: Mercedes C 63 AMG (W205) 6-Kolben Bremssättel Teile Nr. A2044219998 / A204 421 97 98 ( Brembo: 20828205 / 20828206 ) Bremsscheibe vom Mercedes CLS 63 von der Vorderachse in 390x36mm Teilenummer: A2304211212 Bremsscheibe vom Mercedes AMG C63 S (S205) von der Vorderachse in 390x36mm Teilenummer: A2314211812 Lieferumfang: 2x Bremssattel Adapter für Mercedes Benz W205 C63 W212 inklusive hochfestes Schraubenmaterial Materialzertifikat Einbauanleitung

€147.27*

BMW E39 5er Brake Caliper Adapter Brembo 6-piston Caliper Mercedes E60 M5 374x36 Brake Disc

Brake caliper adapter, front axle, on models BMW E39for conversion to the larfe Brembo 6-piston caliper from Mercedes Benz W205 C63, combined with the 374x36mm BMW E60 M5 brake disc. Advantages of this brake system: high deceleration thanks to the material certificate supplied with the order, it is possible to approve your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling. Required components: brake disc: BMW E60 M5 mit 374x36 mm, reference 334 11 2 282 806 brake caliper: 6-piston Brembo Mercedes Benz W205 C63, reference A2054216998 Lieferumfang: 2x brake caliper adapters for BMW E39 high-strength mounting screws material certificate

€369.97*

VW Golf 5 6 Plus Audi A3 Jetta Seat Leon Altea Bremssatteladapter 360x32 Scheibe Audi RS4 B5 Brembo 8-Kolben Bremssattel Audi RS5 Bremsanlage

Bremssattel Adapter für die Vorderachse der die VW Golf 5, 6, Touran, Audi A3 8P, Seat Leon uvm. auf die Audi RS4 RS5 8-Kolben Brembo Bremssättel in Verbindung mit den Audi RS4 B5 360x32 mm Bremsscheiben. Die Adapter passen für folgende Fahrzeuge mit Stahlachsschenkel: Audi A1 S1 quattro 8X1 Audi A3 8P1 Audi A3 Sportback 8PA Audi TT 8J3 Seat Altea 5P1 Seat Leon 5F1 VW Caddy III Großraumlimosine 2CB VW Caddy III Kasten 2CA VW Golf Plus 521 VW Golf V 1K1 VW Golf V Variant 1K5 VW Golf VI 5K1 517 VW Golf VI Cabriolet 517 VW Golf VI Variant AJ5 VW Jetta IV 162 VW Scirocco 137 VW Touran 1T3 VW Touran 5T1 Passend bei allen aufgeführten Fahrzeugen die einen Stahlachsschenkel verbaut haben (nicht passend bei Fahrzeugen mit Aluachsschenkel)Es kann sein, dass Lenkeinschlagbegrenzer für kompletten Lenkeinschlag verbaut werden müssen, diese findest du unten im passenden Zubehör. Vorteile dieser Bremsanlage: extreme Verzögerungswerte auch in Verbindung mit unsere Hinterachsbremsanlage durch das im Lieferumfang enthaltene Materialzertifikat kann eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werden. direkt passend an oben genannte Modelle und daher jederzeit problemlos wieder in den Originalzustand rückrüstbar unsere EPYTEC Bremssattel Adapter erfordern keine Einsendung von Ihren Serienteilen, kein Umschweißen - Umfräsen oder Umbohren. Benötigte Komponenten: Audi RS4 RS5 8-Kolben Original Brembo Bremssättel Bremssattel links Teile Nr: 8E0615107 Bremssattel rechts Teile Nr: 8E0615108 Bremsscheibe: Audi RS4 B5 360x32 mm T.-Nr. 8D0615302B oder RS4 B7 Bremsscheibe 365x34mm Teilenummer 8E0615301AB ( wenn die 365 Scheibe verbaut wird, muss an der Bremssattelaufnahme unterlegt werden, damit die Bremsscheibengröße ausgeglichen wird. ) Lieferumfang: 2x Bremssattel Adapter VW Golf 5 6 Audi A3 Baureihe Materialzertifikat hochfestes Schraubenmaterial

€209.87*

Bremssatteladapter BMW 5er F10 F11 Xdrive Bremsanlage 4 Kolben Bremssattel BMW G30-31 Bremsscheibe 374x36 Tuning Adapter

Bremssattel Adapter für die Vorderachse des 5er, 6er BMW F10, F11 Xdrive und allen heckangetriebenen BMW um die BMW G30-31 4-Kolben Bremssättel in Verbindung mit den BMW F07 F01 374x36mm Bremsscheiben zu fahren.Die BMW M5 4-Kolben Bremssättel werden einfach anstelle des original Sattels mithilfe unseres Tuning Adapters an die original Achsaufnahme geschraubt. Vorteile dieser Bremsanlage: Top Verzögerungswerte, kein Vergleich zu den herkömmlichen Bremsscheiben einfache Montage ein Muss bei Leistungssteigerung Materialzertifikat wird mitgeliefert einfach wieder in original Zustand rückrüstbar Benötigte Komponenten: BMW G30-31 4-Kolben Brembo Bremssättel Teile Nr.: 34116891303 / 34116891304 Bremsscheibe vom BMW F07 F01 374x36mm Teilenummer: Links: 34116789543 / Rechts: 34116789544 Lieferumfang: 2x Bremssattel Adapter für 5er, 6er BMW F10, F11 Xdrive und heckangetriebenen Modellen passender Schraubensatz Materialzertifikat

€54.99*

Bremssatteladapter Audi 100 C4 S4 A6 S6 C4 330x22 Bremsscheibe Audi A6 C6 Hinterachse

Bremssattel Adapter um die Hinterachse von allen Audi 100 S4 C4 etc. auf die Bremsscheiben vom Audi A6 C6 330x22mm in Verbindung mit dem original verbauten Bremssattel umzubauen. Adapter sind passend für folgende Audi Modelle (Allrad): Audi 100 S4 C4 Audi S6 C4 Audi A6 C4 Vorteile dieser Bremsanlage: Top Verzögerungswerte, kein Vergleich zu den herkömmlichen Bremsscheiben hinten deutlich verbessertes Fading durch innenbelüftete Scheiben Ein Muss bei Leistungssteigerung durch das im Lieferumfang enthaltene Materialzertifikat kann eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werden. Benötigte Komponenten: original Bremssattel Audi S4 C4 für 22mm Bremsscheibe, Teilenummer: 447615423 original Bremssattelträger Audi S4 C4, Teilenummer: 4D0 615 405 M Bremsscheibe 330x22 hinten vom Audi A6 C6 Teilenummer: 4F0 615 601F / 4F0 615 601D Lieferumfang: 2x Bremssatteladapter für Audi 100 C4 S4 Quattro Baureihe hochfestes Befestigungsschraubenmaterial Materialzertifikat

€161.65*

Bremssatteladapter Audi S4 B8 Akebono 6-Kolben Bremssattel Audi A4 B9 349x34mm Bremsscheibe

Bremssatteladapter für den Audi S4 B8 auf die Bremsscheibe 349x34mm vom Audi A4 B9 in Verbindung mit den Audi A4 B9 6-Kolben Akebono - Bremssättel. Die Adapter passen für folgende Fahrzeuge: Audi A4 B8 Audi S4 B8 Vorteile dieser Bremsanlage: extreme Verzögerungswerte auch in Verbindung mit unserer Hinterachsbremsanlage durch das im Lieferumfang enthaltene Materialzertifikat kann eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werden direkt passend an die oben genannten Modelle und daher jederzeit problemlos wieder in den Originalzustand rückrüstbar unsere EPYTEC Bremssattel Adapter erfordern keine Einsendung von Euren Serienteilen, kein Umschweißen, Umfräsen oder Umbohren. Benötigte Komponenten: Audi A4 B9 6-Kolben Akebono - Bremssättel Teilenummer: 8W0615105GB / 8W0615106GB Bremsscheiben 349x34mm vom Audi A4 B9 Teilenummer: 4M0 615 301 AB Lieferumfang: 2x Bremssatteladapter für den Audi A4 B8, Audi S4 B8 hochfestes Schraubenmaterial Materialzertifikat

€260.33*

2xBrake Disc Audi A4 Avant RS4 Quattro Zimmermann Sport 360x32 100.3347.70 100.3348.70

We, the company EPYTEC, are your expert in brake systems and suitable brake caliper adapters for conversions. We install and use Zimmermann brake discs ourselves for more than 10 years and have only had very good experiences with them.Especially in terms of braking performance and longevity, the Zimmermann brake discs are excellent.The Zimmermann sports brake discs were developed on the basis of the experience of production vehicle brake discs in conjunction with motorsport.The combination of high-quality cast materials with a perforated braking surface optimizes the braking system. Advantages of the Zimmermann Sport brake discs: better quality for wet braking brake dust and water are permanently removed sportier look better look thanks to a anti-corrosive special coating Z noticeable improvement in the braking performance of your vehicle brake fading is avoided replacement of the original disc 1: 1 possible including ABE, registration is not necessary Delivery: 2x Zimmermann Sport brake disc Manufacturer's ref. 100.3347.70 / 100.3348.70 including ABE

€759.75*

Inner Cylinder Head Bolt with Hexagon Socket Normal Fine Thread Screw M5-M16 High-Strength 10.9 12.9 DIN912 8.8 Steel

Durchmesser/Größe: M14 x 1.5 | Länge: 45mm | Oberfläche: verzinkt 12.9

Cylinder head bolt with hexagon socket, normal and fine thread High-strength DIN912 screws: size: M5-M16 length: 16-180mm surface: 8.8; 10.9; 12.9

Variants from €0.56*

€4.85*

Audi 80 90 S2 Brake Caliper Adapter Audi S8 Brake Disc 345x30 TTRS RS3 Brake Caliper Tuning Adapter

Brake caliper adapter, front axle, on models Audi S2 and Audi 80 / 90, for conversion to the Audi RS3 / TTRS brake calipers, combined with the brake discs 345x30 Audi S8, with original 5x112 bolt / pitch circle or with 5x112 modification. Required components: brake caliper: Audi RS3 / TTRS, reference left 8J0 615 107 / right 8J0 615 108 brake disc: Audi S8 in 345x30, reference: 4D0615301B wheel hub from the Audi S2 with 5x112 must be installed (also available in our shop. Item number: 46859) Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Adapters are delivered galvanized, best corrosion protection according to DIN ISO 9227. Delivery: 2x brake caliper adapters for Audi 80, 90, S2, etc. high-strength mounting screws material certificate

€204.53*

Bremssatteladapter BMW 1er 2er 3er 4er F20 F21 F23 F31 F32 F33 Cabrio Coupe BMW M2 M3 400x36 Bremsscheibe 6 Kolben Bremssattel Tuning Adapter

Bremssattel Adapter für die Vorderachse des 1er, 2er BMW F20, F21, F22 und F23, sowie der 3er und 4er Baureihe F30, F31, F32, F33, F34, F36 um die BMW F10 M5 6-Kolben Bremssättel in Verbindung mit den 400x36mm BMW M2 Bremsscheiben zu fahren.Die BMW F10 M5 6-Kolben Bremssättel werden einfach anstelle des original Sattels mithilfe unseres Tuning-Adapters an die original Achsaufnahme geschraubt. Vorteile dieser Bremsanlage: Top Verzögerungswerte, kein Vergleich zu den herkömmlichen Bremsscheiben einfache Montage ein Muss bei Leistungssteigerung Materialzertifikat wird mitgeliefert einfach wieder in original Zustand rückrüstbar Benötigte Komponenten: BMW F10 M5 6-Kolben Bremssättel Teile Nr. Bremssattel links: 34117845747 / Bremssattel rechts: 34117845748 Bremsscheibe vom BMW M2 400x36mm Teilenummer: Bremsscheibe links: 34118072017 / Bremsscheibe rechts: 34118072018 Lieferumfang: 2x Bremssattel Adapter für 1er, 2er BMW F20, F21, F22 und F23, sowie der 3er und 4er Baureihe F30, F31, F32, F33, F34, F36 passender Schraubensatz Materialzertifikat KFZ Schein Eintragung

€280.40*

Bremssatteladapter BMW E36 316i 328i Compact Umbau BMW E46 Bremsanlage Hinterachse Tuning Adapter

Bremssatteladapter für die Hinterachse des BMW E36 Compact zur Montage der BMW E46 Bremsanlage mit Bremsscheiben 320x20 mm in Verbindung mit dem BMW E46 Bremssattel. Adapter sind passend für folgende Fahrzeuge: BMW 3er Compact 316g BMW 3er Compact 316i BMW 3er Compact 316i BMW 3er Compact 318Ti BMW 3er Compact 318Ti BMW 3er Compact 323Ti Vorteile dieser Bremsanlage: Top Verzögerungswerte, kein Vergleich zur den herkömmlichen Bremsscheiben hinten deutlich verbessertes Fading durch innenbelüftete Scheiben ein Muss bei Leistungssteigerung durch das im Lieferumfang enthaltene Materialzertifikat kann eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werden. Benötigte Komponenten: Bremsscheiben hinten BMW E46 mit 320x22mm Teile Nr: 34201166073 Bremssättel vom BMW E46 Teile Nr: 34216750161 / 34216750162 Lieferumfang: 2x Bremssattel Adapter für die Hinterachse vom BMW E36 Compact hochfestes Schraubenmaterial Materialzertifikat

€171.89*

Bremssatteladapter BMW E92 E93 E91 E90 6-Kolben Bremssattel 400x36 Keramik Stahl Bremsanlage BMW M2 M3 M4

Bremssattel Adapter für die Vorderachse des BMW E92 E93 E91 E90 uvm. um die BMW Stahl Sportbremse vom BMW M2 oder die Keramikbremse vom BMW M3 / M4 zu verbauen. Passend an folgenden Fahrzeugen mit Lochmaß 122mm an der Achsaufnahme: BMW E90 BMW E91 BMW E92 BMW E93 BMW E82 Vorteile dieser Bremsanlage: Top Verzögerungswerte, kein Vergleich zu den herkömmlichen Bremsscheiben einfache Montage ein Muss bei Leistungssteigerung Materialzertifikat wird mitgeliefert einfach wieder in original Zustand rückrüstbar Benötigte Komponenten für den Einbau der Carbon-Keramik Bremsanlage: BMW Performance 6-Kolben Bremssättel vom BMW M3 M4, Teile Nr. 34117850463 / 34117850464 Bremsbeläge vom BMW M3 M4, Teile Nr. 34112284970 Bremsscheibe vom BMW BMW M3 M4 von der Vorderachse in 400x38mm Teilenummer: 34112284805 / 34112284806 Benötigte Komponenten für den Einbau der Stahl Bremsanlage BMW Performance 6-Kolben Bremssättel vom BMW M2 , Teile Nr. 34118745793 / 34118745794 Bremsbeläge vom BMW M2, Teile Nr. 34112284869 Bremsscheibe vom BMW BMW M2, von der Vorderachse in 400x36mm, Teilenummer: 34118072017 / 34118072018 Lieferumfang: 2x Bremssattel Adapter für BMW E92 E93 E91 E90 uvm. hochfestes Befestigungsschraubenmaterial Materialzertifikat

€221.50*

Bremssatteladapter BMW E92 E93 E91 E90 4-Kolben Bremssattel 380x28 Keramik Stahl Bremsanlage BMW M2 M3 M4

Bremssattel Adapter für die Hinterachse des BMW E92 E93 E91 E90 uvm. um die BMW Stahl Sportbremse vom BMW M2 oder die Keramikbremse vom BMW M3 / M4 zu verbauen. Passend an folgenden Fahrzeugen: BMW E90 BMW E91 BMW E92 BMW E93 BMW E82 Vorteile dieser Bremsanlage: Top Verzögerungswerte, kein Vergleich zur den herkömmlichen Bremsscheiben hinten deutlich verbessertes Fading durch innenbelüftete Scheiben ein Muss bei Leistungssteigerung durch das im Lieferumfang enthaltene Materialzertifikat kann eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werden. einfach wieder in original Zustand rückrüstbar Benötigte Komponenten für den Einbau der Carbon-Keramik Bremsanlage: BMW Performance 4-Kolben Bremssättel vom BMW M3 M4, Teile Nr. 34217850465 / 34217850466 Bremsbeläge vom BMW M3 M4, Teile Nr. 34212284990 Bremsscheibe vom BMW BMW M3 M4 von der Hinterachse in 380x28mm Teilenummer: 34212284807 / 34212284808 Benötigte Komponenten für den Einbau der Stahl Bremsanlage BMW Performance 4-Kolben Bremssättel vom BMW M2 , Teile Nr. 34218745797 / 34218745798 Bremsbeläge vom BMW M2, Teile Nr. 34218091600 Bremsscheibe vom BMW BMW M2, von der Hinterachse in 380x28mm, Teilenummer: 34118072019 / 34118072020 Lieferumfang: 2x Bremssattel Adapter für BMW E92 E93 E91 E90 uvm. hochfestes Befestigungsschraubenmaterial Materialzertifikat

€241.05*

Ford Focus RS MK2 Bremssatteladapter 375x36 Bremsscheibe Audi RS4 B9 6 Kolben Brembo Bremssattel Tuning Adapter

Bremssatteladapter für den Ford Focus RS auf die Bremsanlage vom Audi RS4 B9, 375x36mm Bremsscheibe in Verbindung mit dem 6-Kolben Brembo Bremssattel. Die Adapter passen für folgende Fahrzeuge: Ford Focus II 2.5 RS Ford Focus II 2.5 RS 500 Vorteile dieser Bremsanlage: durch das im Lieferumfang enthaltene Materialzertifikat kann eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werden direkt passend an die oben genannten Modelle und daher jederzeit problemlos wieder in den Originalzustand rückrüstbar unsere EPYTEC Bremssattel Adapter erfordern keine Einsendung von Euren Serienteilen, kein Umschweißen, Umfräsen oder Umbohren. Benötigte Komponenten: Audi RS4 B9 6-Kolben Bremssättel Teilenummer: 8W0615107AL / 8W0615108AL Bremsbeläge, Teilenummer: 8W0 698 151 AN Bremsscheiben vom Audi RS4 B9 375x36mm Teilenummer: 4M0615301AM Lieferumfang: 2x Bremssatteladapter für den Ford Focus II 2.5 RS hochfestes Schraubenmaterial Materialzertifikat

€299.86*

Bremssatteladapter BMW 5er F10 F11 Xdrive Bremsanlage 4 Kolben Bremssattel BMW 7er G11 G12 Bremsscheibe 395x36 BMW X3 M X4 M Tuning Adapter

Bremssattel Adapter für die Vorderachse des 5er, 6er BMW F10, F11 Xdrive und allen heckgetriebenen BMW, um die BMW G11, G12 4-Kolben Bremssättel in Verbindung mit den BMW X3 M, X4 M, X5 M, X6 M 395x36mm Bremsscheiben zu fahren.Die BMW G11 und G12 4-Kolben Bremssättel werden einfach anstelle des original Sattels mithilfe unseres Tuning Adapters an die originale Achsaufnahme geschraubt. Vorteile dieser Bremsanlage: Top Verzögerungswerte, kein Vergleich zu den herkömmlichen Bremsscheiben einfache Montage ein Muss bei Leistungssteigerung Materialzertifikat wird mitgeliefert einfach wieder in original Zustand rückrüstbar Benötigte Komponenten: BMW G11, G12 4-Kolben Brembo Bremssättel Teile Nr. 34106891335 / 34106891336 Bremsscheibe vom BMW F95, F96, F97, F98 von der Vorderachse in 395x36mm Teilenummer: 34118054825 Lieferumfang: 2x Bremssattel Adapter für 5er, 6er BMW F10, F11 Xdrive und heckgetriebenen Modellen passender Schraubensatz Materialzertifikat

€62.59*

Audi A8 4D Hinterachse Cayenne 4 Kolben Bremssattel Bremssatteladapter 330x22 Bremsscheibe Tuning Adapter

Bremssattel Adapter um die Hinterachse von allen Audi A8 4D etc. auf Porsche Cayenne Bremse umzubauen. Die Kombination wird in Verbindung mit den 330x22 mm Bremsscheiben vom Audi A6 hinten verwendet. Die Porschesättel werden an die Hydraulik des Fahrzeuges angeschlossen und können somit eine enorme Bremskraft entfalten. Da diese aber keine Handbremsfunktionen haben, wird zusätzlich der originale Audi S4 B5 Sattel als Handbremssatteladapter verwendet. Der Hydraulikanschluss wird dabei mit einem Blindstopfen verschlossen. Somit dient dieser nur als Handbremssattel. Adapter sind passend für folgende VW und Seat Modelle (Allrad): Audi A8 4D Vorteile dieser Bremsanlage: Top Verzögerungswerte, kein Vergleich zu den herkömmlichen Bremsscheiben hinten Perfekt passend zu unseren Bremssatteladapter für die Vorderachse Ein Muss bei Leistungssteigerung Materialzertifikat wird mitgeliefert Benötigte Komponenten: Handbremssattel original Audi S4 B5 für 22mm starke Bremsscheiben, Teilnummer: 8D0 615 424 C, 8D0 615 423 C Bremssattelträger original Audi S4 B5 für 22mm starke Bremsscheiben, Teilenummer: 8D0 615 405 S Bremssättel vom Porsche Cayenne von der Hinterachse Teile Nr: (hintere Zahl unterscheidet Rechten und Linken Sattel) 955.352.421 + 955.352.422 (Nur 100% passend mit den angegebenen Porsche-Sätteln) Brembo Nr:20.7673.03 Bremsscheibe 330x22 hinten vom Audi A6 Teilenummer: 562507JC Lieferumfang: 2x Bremssatteladapter für Porsche Cayenne Sattel 2x Bremssatteladapter für Adaption Handbremssattel hochfestes Befestigungsschraubenmaterial Materialzertifikat

€396.85*

VW Golf Scirocco Corrado G60 VR6 16V Brake Caliper Adapter S3 R32 280x22 Brake Disc Polo 9N Wheel Hub Rear Axle

Brake caliper adapter with special wheel hubs to drive the rear brake calipers from the Golf Mk4 V6 R32 Audi S3 8L, combined with the front 280mm brake discs from the VW Golf Mk4 on the rear axle. Adapters are suitable for the following VW and Seat models: Golf MK1 Golf MK2 MK3 + GTI+ VR6 Corrado Jetta Passat 35i Scirrocco Vento Seat Cordoba Seat Ibiza Seat Toledo Advantages: top deceleration, without comparison with conventional brake discs, rear. only manufacturer components installed better performance supplied material certificate inexpensive procurement of spare parts thanks to the material certificate supplied with the order, it is possible to approve your purchase even for series vehicles technology: Using the original Polo 9N wheel hubs, the 280 mm brake discs are centered and screwed. The original wheel bearings from the Polo 9N can still be used. Required components: brake caliper: left VW reference 8N0615423C, roight VW Teilenummer 8N0615424C brake caliper mounting bracket VW reference 8N0 615 425 B or painted in blue from the R32: 1J0 615 425 F. stub axle from Polo 6N GTI (also available in our shop, item number APA213) wheel hub from Polo 9N reference: 6Q0598611 brake disc: front disc from Golf 4 280x22 mm reference: 1J0 615 301 E Delivery: 2x brake caliper adapters high-strength mounting screws material certificate

€151.45*

Bremssatteladapter Audi RS4 B9 Keramik Bremsanlage Audi RS6 C8 Bremsscheibe 370mm

Bremssattel Adapter um die Audi RS6 C8 Keramik Bremsanlage an der Hinterachse des Audi RS4 B9 zu fahren. Vorteile dieser Bremsanlage: Top Verzögerungswerte, kein Vergleich zur den herkömmlichen Bremsscheiben hinten deutlich verbessertes Fading durch innenbelüftete Scheiben ein Muss bei Leistungssteigerung durch das im Lieferumfang enthaltene Materialzertifikat kann eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werden. Benötigte Komponenten: Bremssättel vom Audi RS6 C8, Teilenummer links: 4M8615403QC8 / rechts: 4M8615404QC8 Bremssattel Träger, Teile Nr: links: 4M8615425QC8 / rechts: 4M8615426QC8 Keramik Bremsscheiben vom Audi RS6 C8 370x32mm, Teilenummer: 4K0615301AJ Lieferumfang: 2x Bremssatteladapter für den Audi RS4 B9 kompletter Schraubensatz hochfest Materialzertifikat

€92.76*

Bremssatteladapter für Porsche 944 S2 964 911 Bremsscheibe 322x32mm Porsche 964 Turbo Bremssättel BIG RED 993

Bremssatteladapter für die Porsche 944 964 Baureihe um die Porsche 933 4-Kolben Brembo BIG RED Bremssättel in Verbindung mit den Bremsscheiben 322x32 mm vom Porsche 964 3.6 Turbo zu verbauen. Die Adapter passen für folgende Fahrzeuge: Porsche 944 S2 Porsche 911 Porsche 968 Porsche 968 Cabrio Vorteile dieser Bremsanlage: durch das im Lieferumfang enthaltene Materialzertifikat kann eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werden direkt passend an die oben genannten Modelle und daher jederzeit problemlos wieder in den Originalzustand rückrüstbar unsere EPYTEC Bremssattel Adapter erfordern keine Einsendung von Euren Serienteilen, kein Umschweißen, Umfräsen oder Umbohren. Benötigte Komponenten: Porsche 933 4-Kolben Brembo BIG RED Bremssättel, Teilenummer: 993.351.425 / 993.351.426 ; EQ641200 Bremsbeläge, Teilenummer: 993.351.949.00 / 99335194900 Bremsscheiben vom Porsche 964 3.6 Turbo 322x32mm Teilenummer: 965.351.046.00 / 965.351.045.00 ; 96535104600 / 96535104500 Lieferumfang: 2x Bremssatteladapter Porsche 944 S2 911 964 hochfestes Schraubenmaterial Materialzertifikat

€223.52*

BMW E39 5th. Brake Caliper Adapter M6 Brake System Brembo 6-piston Brake Caliper E60 M5 374x36 Brake Disc Tuning Adapter

Brake caliper adapter, front axle, on models BMW E39, for conversion to the large Brembo 6 -piston brake calipers from the BMW M6 F10, combined with the 374x36mm BMW E60 M5 brake discs. Suitable for all BMW E39 6-cylinder model Advantages: high deceleration thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling screws are included. Required components: brake disc: BMW E60 M5 with 374x36mm, reference 34 11 2 282 806 brake caliper: 6-piston Brembo BMW M6 F10, reference 34117845747 / 34117845748 Delivery: 2x brake caliper adapters for BMW E39 high-strength mounting screws material certificate

€206.67*

Bremssatteladapter Fiat Punto GT 305x28mm Bremsscheibe Fiat Coupe 20V Turbo Brembo 4 Kolben Bremssattel Tuning Adapter

Bremssatteladapter für den Fiat Punto GT auf die Fiat Coupe 20V Turbo 4-Kolben Brembo - Bremssättel in Verbindung mit den Bremsscheiben 305x28 vom Fiat Coupe. Die Adapter passen für folgende Fahrzeuge: Fiat Punto GT Vorteile dieser Bremsanlage: extreme Verzögerungswerte durch das im Lieferumfang enthaltene Materialzertifikat kann eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werden direkt passend an die oben genannten Modelle und daher jederzeit problemlos wieder in den Originalzustand rückrüstbar unsere EPYTEC Bremssattel Adapter erfordern keine Einsendung von Euren Serienteilen, kein Umschweißen, Umfräsen oder Umbohren. Benötigte Komponenten: Fiat Coupe 20V Turbo 4-Kolben Brembo - Bremssättel Teilenummer: 719159000 / 719160000 Bremsbeläge, Teilenummer: 5892740 / 4728999 Bremsscheiben vom Fiat Coupe 305x28mm Teilenummer: 71738914 / 51778054 Lieferumfang: 2x Bremssatteladapter Fiat Punto GT hochfestes Schraubenmaterial Materialzertifikat

€198.12*

Bremssatteladapter Opel Vectra C OPC Caravan Bremsscheibe 345x30mm Renault Megane RS 4 Kolben Bremssattel Brembo Tuning Adapter

Bremssatteladapter für Brembo 4 - Kolben Bremssättel vom Renault Megane III RS in Verbindung mit der 345 x 30 mm Bremsscheibe vom Opel Vectra OPC . Passend für folgende Fahrzeuge mit Radlagergehäuse OE: 13136696 / 5308017: Opel Vectra C Limo Opel Vectra C CC Opel Vectra C Caravan Benötigte Komponenten: Bremssättel vom Renault Megane 3 RS Teilenummer: 20.A425.03 ; 20.A425.04 ; 410113693R ; 410116043R Bremsscheiben vom Opel Vectra C OPC 345x30 mm Teilenummer: 93188445 Vorteile dieser Bremsanlage: bestmögliche Verzögerungswerte und Performance! Unverzichtbar auch bei Leistungssteigerungen Unsere EPYTEC Bremssattel Adapter erfordern keine Einsendung von euren Serienteilen, kein umschweißen, umfräsen oder umbohren Direkt passend an die oben genannten Modelle und daher jederzeit problemlos wieder in den Originalzustand rückrüstbar inklusive komplettem Schraubenmaterial Lieferumfang: 2x Bremssatteladapter komplett verzinkt für Opel Vectra C kompletter Schraubensatz hochfest. Materialzertifikat

€250.15*

Steel Brake Line Steel Brake Line Custom Configurator

Exclusive and individual: length, color and connections / tips are available according to your choice.

Advantages compared to original brake lines:

Germany	€0.00
United Kingdom	€20.60
Austria	€18.21
France	€18.21
Switzerland	€19.77
Italy	€15.84
Spain	€15.84
Andorra	€15.84
Arab Emirates	€35.93
Afghanistan	€35.93
Antigua and Barbuda	€40.60
Anguilla	€40.60
Albania	€19.98
Armenia	€35.93
Niederländische Antillen	€40.60
Angola	€40.60
Antarctica	€15.84
Argentina	€40.60
American Samoa	€40.60
Australia	€40.60
Aruba	€40.60
Åland Islands	€15.84
Azerbaijan	€35.93
Bosnia and Herzegovina	€19.98
Barbados	€40.60
Bangladesh	€35.93
Belgium	€18.21
Burkina Faso	€40.60
Bulgaria	€16.36
Bahrain	€35.93
Burundi	€40.60
Benin	€40.60
Saint Barthélemy	€15.84
Bermuda	€40.60
Brunei Darussalam	€35.93
Bolivia (Plurinational State of)	€40.60
Bonaire, Sint Eustatius and Saba	€40.60
Brazil	€40.60
Bahamas	€40.60
Bhutan	€35.93

Steel Brake Line Steel Brake Line Custom Configurator

Exclusive and individual: length, color and connections / tips are available according to your choice.

Advantages compared to original brake lines:

Login