Opel Kadett Calibra Vectra Porsche Brake calipers Adapter Brake system Brake caliper adapter for front axle
€207.59*
- Einfache TÜV Eintragung
- Qualität Made in Germany
- Faire Preise ohne zwischenhandel du kaufst direkt beim Hersteller und Enwickler des Produktes
- Weltweit Nr 1 in Sachen Tuning Adapter
- 15 Jahre Expertenwissen
- 10 Jahre Garantie
Brake caliper adapter for the large Vectra C GTS brake discs 314 x 28mm to be used in conjunction with the Porsche Boxster S and 996 brake calipers (996.351.425 or 426).
Can be used without modifications on all Opels with a standard 5x110mm bolt circle such as Omega A B
Otherwise with wheel hub conversion to 5x110 bolt circle on all Opel models e.g. Astra, Calibra, Kadett & Vectra can be mounted directly on the strut.
low conversion effort for enormous braking power.
Advantages:
- Extreme deceleration values also in connection with our rear axle brake system
- The material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles
- directly suitable for the above models and can therefore be restored to the original condition at any time without any problems
- our EPYTEC brake caliper adapters do not require you to send in your serial parts, no re-welding - re-milling or re-drilling.
Scope of delivery:
- material certificate
- 2x brake caliper adapters for Vectra C discs with Porsche 996 brake calipers
- high-strength screw material
Tips, information and hints:
- For a better ventilation of the brake system, we recommend removing the dust cover plates and brake anchor plates.
- We can generally not answer, which rim size you can mount after your brake conversion. There are simply too many different rims.
- In rare cases it is possible that the rims touch minimal the brake caliper, then you can simply use spacers.
>> Now directly to spacers << - Install the adapter with the necessary components and then check if new brake lines are required. Because, depending on the vehicle, the lines may be too short or the line tips may not suitable. We advise you to change to steel braided brake line because of the quality and technical advantage. Specifically for this, we have developed an online brake line configurator, where you can assemble the type of steel braided brake lines you want. Click here to go to the configurator
>> Configure steel braided brake lines <<
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Login
23 March 2023 07:55
Marcel A
.
5 March 2021 16:22
Luciano F
Sehr gute Passgenauigkeit ,top Verarbeitung. Kann es nur empfehlen. Gerne wieder.
5 March 2021 13:58
Luciano F
Sehr gute Passgenauigkeit ,top Verarbeitung. Kann es nur empfehlen. Gerne wieder.
4 March 2021 06:32
Luciano F
Sehr gute Passgenauigkeit ,top Verarbeitung. Kann es nur empfehlen. Gerne wieder.
4 March 2021 06:32
Luciano F
Sehr gute Passgenauigkeit ,top Verarbeitung. Kann es nur empfehlen. Gerne wieder.
19 February 2021 10:34
Luciano F
Super Passgenauigkeit, top Verarbeitung, schneller Versand, gerne wieder.!!
19 February 2021 10:33
Luciano F
Super Passgenauigkeit, top verarbeitet, und super schneller Versand. gerne wieder.
9 July 2019 22:31
Simionescu A
Best finishing products Perfect fittment. I will recommend Epytec to all my friends
9 July 2019 09:48
Simionescu A
Very good quality Super fast delivery
25 June 2019 06:33
Simionescu A
Super quality Super fast Good communication with epytec
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: