Mercedes Benz E63 W212 CLS 63 W218 ceramic 402x39mm brake system Mercedes Benz 6-piston brake caliper adapter
€194.31*
- Einfache TÜV Eintragung
- Qualität Made in Germany
- Faire Preise ohne zwischenhandel du kaufst direkt beim Hersteller und Enwickler des Produktes
- Weltweit Nr 1 in Sachen Tuning Adapter
- 15 Jahre Expertenwissen
- 10 Jahre Garantie
Brake calipet adapter, front axle, on models Mercedes Benz E63 W212 and CLS63 W218, for conversion to the Mercedes Benz Ceramic brake discs 402x39, combined with the Mercedes Benz 6-piston W205, W213, C190 brake calipers.zu.
Since the original Mercedes brake caliper bracket is not available for purchase individually, but only in conjunction with the 6-piston calipers, we have developed this adapter..
Advantages of this brake system:
- top deceleration, without comparison with conventional brake discs
- easy assembly
- better performance
- supplied material certificate
- can easily be restored to the original state
Required components:
- brake caliper: Mercedes W197 SLS W205 C63 AMG 6-piston, reference A204 421 99 98 and A204 421 97 98 or 2124219798 and 2124219998
- brake disc: ceramic brake disc from Mercedes CLS 63, 402x39mm, front axle, reference : 231 421 15 12 / 231 421 16 12
Delivery:
- 2x brake caliper adapters for Mercedes Benz E63 W212 CLS 63 W218
- complete screw kit
- material certificate
Tipps, Infos und Hinweise:
- Zur besseren Belüftung der Bremsanlage empfehlen wir die Ankerbleche/Bremsstaubbleche zu entfernen.
- Welche Felgengröße du nach deinem Bremsenumbau fahren kannst, können wir pauschal nicht beantworten. Es gibt einfach zu viele unterschiedliche Felgen. Es kann in seltenen Fällen vorkommen, dass die Felgen am Bremssattel minimal anliegt, dann können einfach Spurverbreiterungen verwendet werden.
Jetzt direkt zu >> Spurverbreiterungen nach Wunsch << - Den Adapter mit den benötigten Komponenten zu verbauen um anschließend zu prüfen ob ggf. neue Bremsleitungen benötigt werden, da es je nach Modell sein kann das die alten nicht lang genug sind, oder vom Anschluss her nicht passen. Wir empfehlen durch den deutlich besseren Wirkungsgrad auf Stahlflexleitugen zu wechseln, eigens für diese Funktionsweise haben wir dafür einen Stahlflexkonfigurator entwickelt, indem du diese nach deinen Wünschen zusammenstellen und anschließend verlegen kannst.
hier geht’s zum Stahlflexkonfigurator >> Stahlflex-Bremsleitung konfigurieren <<
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Login
28 June 2022 09:21
Sascha D
Absolut hochwertiges Produkt , Verarbeitung, Schrauben . einfach top Passt alles perfekt, bin auch mehr als zufrieden mit der netten und kompetenten und Fachmännischen Beratung. Man fühlt sich gut beraten und aufgehoben , immer wieder gerne 5 Sterne + Und das Ergebnis nach dem bremsen Upgrade, einfach Wahnsinn
28 June 2022 09:05
Sascha D
Absolut hochwertiges Produkt , Verarbeitung, Schrauben . einfach top Passt alles perfekt, bin auch mehr als zufrieden mit der netten und kompetenten und Fachmännischen Beratung. Man fühlt sich gut beraten und aufgehoben , immer wieder gerne 5 Sterne + Und das Ergebnis nach dem bremsen Upgrade, einfach Wahnsinn
13 December 2019 07:23
Simon S
Sehr gut verarbeitet Der Support im Vorfeld war sehr gut. Man hatte vorallem jemanden am Telefon der wusste wovon er redet und man wurde sehr gut beraten
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: