You can find out everything about your order via your -> View customer account
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT

Brake Caliper Adapter Audi RS4 A4 S4 B6 B7 E8 Brake System Mercedes C63 AMG 6-piston Caliper Brake Disc 390x36

€241.48*

Available
Delivery by Tuesday, 21.05.2024 if you order within the next 4 Hours.
Product number: 581
Weight: 3.214 kg
Einbauort: vorne
Lochabstand Achsschenkel: 146mm
Lochabstand Bremssattel : 256mm
Your benefits
  • Einfache TÜV Eintragung
  • Qualität Made in Germany
  • Faire Preise ohne zwischenhandel du kaufst direkt beim Hersteller und Enwickler des Produktes
  • Weltweit Nr 1 in Sachen Tuning Adapter
  • 15 Jahre Expertenwissen
  • 10 Jahre Garantie
Brake caliper adapter on models Audi RS4 RS5 B7, for conversion to the 6-piston brake calipers from Mercedes C63 AMG W204,  combined with the original 2-part brake disc of Mercedes AMG c63 W204 390X36mm

Suitable for the following vehicles:

  • Audi RS4 B7 Quattro
  • Audi A4 B7
  • Audi A4 B6
  • Seat Exeo

Advantages of this brake system:

  • thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles
  • directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems
  • Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling.

Required components:

  • 6 piston brake caliper from Mercedes C63 AMG W204, reference Brembo: 20A495.03, original reference.: A204 421 2011
  • 2-parts brake disc: Mercedes AMG c63 W204 390X36mm, reference 09.9313.33, converted to RS4 B7 disc pots
    • Tip &Note: the brake disc bells from the Audi RS4 B7 can simply be screwed at the Mercedes brake disc

Delivery:

  • 2x brake caliper adapters for Audi A4 S4 RS4 B6 B7 E8, Seat Exeo
  • material certificate
  • high-strength mounting screws

Tipps, Infos und Hinweise:

  • Zur besseren Belüftung der Bremsanlage empfehlen wir die Ankerbleche/Bremsstaubbleche zu entfernen.
  • Welche Felgengröße du nach deinem Bremsenumbau fahren kannst, können wir pauschal nicht beantworten. Es gibt einfach zu viele unterschiedliche Felgen. Es kann in seltenen Fällen vorkommen, dass die Felgen am Bremssattel minimal anliegt, dann können einfach Spurverbreiterungen verwendet werden.Jetzt direkt zu >> Spurverbreiterungen nach Wunsch <<
  • Den Adapter mit den benötigten Komponenten zu verbauen um anschließend zu prüfen ob ggf. neue Bremsleitungen benötigt werden, da es je nach Modell sein kann das die alten nicht lang genug sind, oder vom Anschluss her nicht passen. Wir empfehlen durch den deutlich besseren Wirkungsgrad auf Stahlflexleitugen zu wechseln, eigens für diese Funktionsweise haben wir dafür einen Stahlflexkonfigurator entwickelt, indem du diese nach deinen Wünschen zusammenstellen und anschließend verlegen kannst.hier geht’s zum Stahlflexkonfigurator >> Stahlflex-Bremsleitung konfigurieren <<
  • Die Töpfe vom Audi RS4 B7 können einfach auf die Mercedes Bremsscheibe umgeschraubt werden 

Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.

Einbauort: vorne
Lochabstand Achsschenkel: 146mm
Lochabstand Bremssattel : 256mm

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


  • Can I also use other brake discs as specified in the required components?
  • No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems

  • Can I also use other brake calipers as specified in the required components?
  • No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:

Questions? Click here for the contact form

Passendes Zubehör

Steel Brake Line Steel Brake Line Custom Configurator

€46.95*
Item number: SF1
PCD Adapter Spacer Custom-Made Manufacturing
  • ✓ PCD adapter / Pitch Circle adapter, spacer / track plate / exclusive and individual, custom-made manufacturing
  • ✓ plates made of high-strength aircraft aluminum
  • ✓ with engraved logo on the plate and material certificate for easier registration

€96.00*
Item number: LK1
You can find out everything about your order via your -> View customer account