Big Red Porsche 944 S2 924 928 968 / 996Turbo Adapter Brake Caliper Adapter Brake Caliper Adapter
€252.92*
- Einfache TÜV Eintragung
- Qualität Made in Germany
- Faire Preise ohne zwischenhandel du kaufst direkt beim Hersteller und Enwickler des Produktes
- Weltweit Nr 1 in Sachen Tuning Adapter
- 15 Jahre Expertenwissen
- 10 Jahre Garantie
1 pair of new Big Red caliper adapters for conversion from Porsche
- 944 S2
- 924
- 928
- 968
to the big brake system of the Porsche 996 Turbo.
With this adapter, the complete brake system of the above models can be adopted plug & play.
Important: The adapters fit only to the steering knuckle with hole size 94mm. For steering knuckles with hole size 76mm we also have suitable adapters in the program. (click here)
Technical data of the brake system:
- Porsche brake caliper part number: 996.351.429 / 996.351.430 (Only 100% suitable with the specified Porsche calipers)
- Brake discs: 330 x 34 mm
- Brake disc left VA
- Porsche reference number: 996 351 409 02, 996 351 409 03, 996 351 409 04
- Brake disc right VA
- Porsche reference number: 996 351 410 02, 996 351 410 03, 996 351 410 04
- Brake pad set VA
- Porsche reference number: 99635194910, 99635194911, 99635194912, 99735194902
Brake caliper holder are made of high strength steel alloy including material certificate.
Advantages:
- Extreme deceleration values also in conjunction with our rear axle brake system.
- Due to the material certificate included in the scope of delivery, a registration by individual acceptance can also be enabled for series vehicles
- Directly suitable for the above mentioned models and therefore easily rebuildable to the original condition at any time.
- Our EPYTEC brake caliper adapters require no sending in of their series parts, no re-welding - re-milling or re-drilling.
Scope of delivery:
- 2x holder (see picture)
- Material certificate
- Screw set high strength
- Stress analysis for easier registration
We also have suitable saddle holders for the 964 and 911 in our program.
Tips, information and hints:
- For a better ventilation of the brake system, we recommend removing the dust cover plates and brake anchor plates.
- We can generally not answer, which rim size you can mount after your brake conversion. There are simply too many different rims.
- In rare cases it is possible that the rims touch minimal the brake caliper, then you can simply use spacers.
>> Now directly to spacers << - Install the adapter with the necessary components and then check if new brake lines are required. Because, depending on the vehicle, the lines may be too short or the line tips may not suitable. We advise you to change to steel braided brake line because of the quality and technical advantage. Specifically for this, we have developed an online brake line configurator, where you can assemble the type of steel braided brake lines you want. Click here to go to the configurator
>> Configure steel braided brake lines <<
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Login
1 March 2024 13:54
Holger G
Super Passform und gute Qualität
30 June 2021 12:39
Daniel D
Bonjour, je suis en Guadeloupe, je ne recevrais les article que le 18 juillet par la famille qui voyage. Dés la réception, je ne manquerai pas de vous faire une évaluation. Mais je suis presque certain que la qualité est présente car je connais EPITEC depuis longtemps. Cordialement
14 February 2021 12:48
Jens-Peter F
Passt perfekt, Verarbeitung ist gut, gibt nicht zu beanstanden. Ich würde als Verbesserungsvorschlag vllt Unterlegscheiveb für die Schrauben empfehlen, wie sie serienmäßig bei Porschebremssätteln eingesetzt werden. Mit freundlichen Grüßen
3 October 2019 17:25
Alexander Lucas M
Hab den Adapter für mein Projekt 924er gekauft und eingebaut. Passt super und sieht noch besser aus. Hab das Produkt schon Bekannten empfohlen. Freue mich schon auf den nächsten Adapter:-)
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: