Golf 3 VR6 Corrado Passat 35i 312x25 S3 Porsche 996 Brake Caliper Adapter Brake Caliper Bracket
- ✓ 312x25 8N0615301A Audi S3 / Golf 4 GTI brake disc
- ✓ 4-piston 996352422 / 996352421 Porsche 996 brake caliper
- ✓ front axle
€207.83*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Suitable for all vehicles with VR5 engine and axle (5x100 PCD ), e.g :
- Golf VR6
- Corrado VR6
- Passat 35i VR6
Advantages of this brake system:
- high deceleration, also in conjunction with our rear axle braking system
- thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles
- directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems
- Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling
Required components:
- brake calipers from Porsche 996 (rear axle) , referencef: 996.352.422 + 996.352.421 (only 100% fits with the indicated Porsche calipers)
- brake discs from Audi S3 (8L) /Golf 4 GTI 312x25 mm , reference : 8N0 615 301 A
rims: at least 16 inch
Delivery:
- 2x brake caliper adapters (see picture)
- high-strength mounting screws
- material certificate
Tips, information and hints:
- For a better ventilation of the brake system, we recommend removing the dust cover plates and brake anchor plates.
- We can generally not answer, which rim size you can mount after your brake conversion. There are simply too many different rims.
- In rare cases it is possible that the rims touch minimal the brake caliper, then you can simply use spacers.
>> Now directly to spacers << - Install the adapter with the necessary components and then check if new brake lines are required. Because, depending on the vehicle, the lines may be too short or the line tips may not suitable. We advise you to change to steel braided brake line because of the quality and technical advantage. Specifically for this, we have developed an online brake line configurator, where you can assemble the type of steel braided brake lines you want. Click here to go to the configurator
>> Configure steel braided brake lines <<
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
5 June 2019 12:40
Mario M
I needed a custom fit, to mount Porsche brakes, onto a Golf 3 VR6. With these adapters it will fit.
22 November 2019 12:13
Manuel S
Ich wurde darum gebeten. Das Material und die Verarbeitung sind sehr hochwertig. Wenn man die richtigen Teile hat, würde ich es auf jeden Fall weiter empfehlen. Das Produkt an sich ist ohne Probleme. Da mir nicht bekannt ist woher ich andere Adapter beziehen kann. Nein. Leider passen die Bremssättel nicht, trotz richtiger Teilenummer. Und werde daher auf eine größere Bremse umbauen.
15 April 2021 09:29
Ronald C
good quality product
11 July 2021 20:59
Christopher S
Super Qualität und schneller Versand top Firma
19 March 2018 22:27
Christian H
Einfach nur top passt wackelt und hat Luft , würde ich immer wieder kaufen Mit freundlichen Grüßen
23 May 2018 10:00
Lukas E
Hat supper gepasst
23 May 2018 14:30
TOMES F
Very suitable!
12 December 2018 09:22
Guillaume H
Bon site claire net et précis avec un maximum dinfo et une qualité du matériel au top !!! Livraison rapide Je recommande les yeux fermés !!!!
12 July 2021 17:07
Christopher S
Super Qualität und schneller Versand top Firma
15 July 2022 11:21
Maxime S
Pièce de haute qualité très bien conçue et très bien fini,le seul reproche le poids de la pièce,peut être pour garantir de la bonne qualité...
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ Length: 57cm
- ✓ M10x1 curved on the outside
- ✓ M10x1 straight on the inside
- ✓ 312x25
- ✓ 65mm centering
- ✓ 34.4mm height
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ 312x25
- ✓ 65mm centering
- ✓ 35mm height
- ✓ optimized paste for brake systems
- ✓ correct viscosity
- ✓ no squeaking
- ✓ Racing brake fluid
- ✓ Reduction in brake fading
- ✓ improved pedal feel
- ✓ 312x25
- ✓ 65mm centering
- ✓ 35mm height
- ✓ 312x25
- ✓ 65mm centering
- ✓ 35mm height
- ✓ Registration-free
- ✓ Redstuff ceramic covering
- ✓ temperature up to 750°C
- ✓ 5x100 bolt circle
- ✓ Plug & Play
- ✓ VW Golf 2-3 / Passat / Corrado
- ✓ Significantly higher boiling point
- ✓ Better pedal feel
- ✓ Suitable for the race track
