Skip to main content
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT
tuev sued logo
Made in germany

Golf 1 Caddy Brake caliper adapter S2 G60 Adapter Brake calipers Brake system - Including brake caliper: Yes with brake caliper

Brake caliper adapter to adapt the front axle of the Golf 1, Golf 1 Cabrio, Caddy 14d, Jetta 1, Scirocco to the 280mm brake disc of the Golf 2 G60 in conjunction with the Audi S2 brake caliper.

These adapters were developed by us NEW, especially for the S2 Girling 60 brake calipers!

Required components:

  • Brake discs front 280mm diameter Golf 2 G60 (incl. Syncro), Passat G60 (incl. Syncro),Corrado G60 part no. 535 615 301
  • Brake callipers from S2 Girling 60, part number: 895 615 124 A / 895 615 123 A
  • Brake caliper carrier, part number: 447 615 125

Advantages of this brake system:

  • even stronger braking effect than with the conversion to G60 brakes thanks to double-piston brakes.
  • 15 inch wheel diameter. ET must be tested depending on the rim, it may be necessary to use track plates.
  • Registration for public road use should not be a problem if the work is carried out correctly and completely.
  • Fits directly on the above-mentioned models and can therefore be easily converted back to the original condition at any time.

Scope of delivery:

  • 2x brake caliper adapter for Golf 1, Golf 1 Cabrio, Caddy 14d, Jetta 1, Scirocco
  • 2x brake caliper
  • 1x installation instructions with detailed images
  • 1x material certificate
  • Stress analysis for registration
FAQ: Häufig gestellte FragenrnSollte ich die Ankerplatten bzw. Staubschutzbleche entfernen?rnWir empfehlen, die Metallbleche zu entfernen, da sie die Belüftung einschränken. Ohne diese Barriere wird die Bremse effizienter gekühlt und bleibt selbst bei starker Beanspruchung leistungsfähig.rnWie kann ich die Montage der Felgen erleichtern?rnMontagehilfen für Räder erleichtern und präzisieren das Ausrichten und Aufsetzen der Felge. Dies schützt das Gewinde und die Felge und spart Zeit.rnMontagehilfe für Räder ansehenrnBenötige ich Spurplatten nach dem Umbau?rnEs gibt keine allgemeine Regel zur Bestimmung der passenden Felgengröße. Wenn die Felge leicht am Bremssattel schleift, können Spurplatten verwendet werden, um den notwendigen Abstand zu schaffen.rnSpurplatten ansehenrnBenötige ich neue Bremsleitungen?rnFür eine optimale Passform und eine stabile Bremsleistung empfehlen wir Stahlflexleitungen. Diese sind konfigurierbar und liefern konstantere Ergebnisse als Gummileitungen.rnStahlflex konfigurierenrnWarum unsere Adapter die beste Wahl sindrnWussten Sie, dass sich Ihr EPYTEC Adapter oft bereits nach dem ersten Austausch von Verschleißteilen bezahlt macht?rnDies liegt daran, dass unsere Adapter für OE-Bremsscheiben und Bremssättel ausgelegt sind, die wir bei der Entwicklung bewusst ausgewählt haben. Diese Komponenten werden nicht nur in höchster Qualität gefertigt und in Serienfahrzeugen eingesetzt, sondern sind aufgrund ihrer Großserienproduktion auch günstig und leicht verfügbar.rnFür Sie bedeutet das eine erstklassige Bremsleistung, ohne auf teure Speziallösungen anderer Hersteller angewiesen zu sein.rnUnd selbst bei der HU (TÜV) haben Sie es leichter, denn unsere OE-Komponenten sind bereits offiziell zugelassen – der Prüfer kann direkt darauf verweisen, sodass Ihre Eintragung unkompliziert und sicher ist.

Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.

Brake caliper hole spacing: 94
Hole spacing steering knuckle: 76
Manufacturer: Epytec
Mounting location: front
Brake caliper hole spacing: 94
Hole spacing steering knuckle: 76
Manufacturer: Epytec
Mounting location: front

10 of 14 reviews

Average rating of 5 out of 5 stars


100%

0%

0%

0%

0%


Leave a review!

Share your experiences with other customers.


13 December 2019 00:54

Review with rating of 5 out of 5 stars

László S

Richtige Bearbeitung. Präzise Verarbeitung.

17 April 2020 21:24

Review with rating of 5 out of 5 stars

Matthias S

Perfekt Passform!!! Schnelle Lieferung

23 August 2017 14:43

Review with rating of 5 out of 5 stars

2012tuningfreund

Sehr gut!!!

15 March 2022 10:13

Review with rating of 5 out of 5 stars

Maximilian H

Super pass genau und super Qualität

26 September 2017 21:28

Review with rating of 5 out of 5 stars

fischersgerd

Alles top jederzeit gerne wieder

23 March 2021 10:40

Review with rating of 5 out of 5 stars

mk1gtiphill

Item as described and fast delivery

23 August 2019 07:40

Review with rating of 5 out of 5 stars

07oldschool

Top gerne wieder.

19 June 2024 16:51

Review with rating of 5 out of 5 stars

robburtos3

Great product and service, excellent quality, highly recommend

11 March 2017 21:32

Review with rating of 5 out of 5 stars

thetiny112

Alles bestens . Danke sagt thetiny112

1 October 2016 07:40

Review with rating of 5 out of 5 stars

lbvr6-2111

ok !!!!!!!!!!!!!!!!!

  • Can I also use other brake discs as specified in the required components?
  • No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems

  • Can I also use other brake calipers as specified in the required components?
  • No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:

Questions? Click here for the contact form
Motor Motorcode
1.8 14|95PS(70KW)
1.5 14|70PS(51KW)
1.6 14|75PS(55KW)
1.6 D 14|55PS(40KW)
Motor Motorcode
1.6 53|70PS(51KW)
1.3 53|60PS(44KW)
1.5 53|75PS(55KW)
1.5 53|86PS(63KW)
1.6 53|75PS(55KW)
1.6 53|85PS(63KW)
1.1 53|50PS(37KW)
1.6 53|110PS(81KW)
1.5 53|70PS(51KW)
Motor Motorcode
1.8 155|95PS(70KW)
1.8 155|90PS(66KW)
1.8 155|111PS(82KW)
1.8 155|112PS(82KW)
1.6 155|72PS(53KW)
1.3 155|54PS(40KW)
1.6 155|75PS(55KW)
1.5 155|70PS(51KW)
1.8 155|98PS(72KW)
1.6 155|110PS(81KW)
Motor Motorcode
1.6 GTI 17|110PS(81KW)
1.5 D 17|50PS(37KW)
1.1 17|52PS(38KW)
1.6 TD 17|70PS(51KW)
1.8 GTI 17|112PS(82KW)
1.6 17|75PS(55KW)
1.6 D 17|54PS(40KW)
1.3 17|60PS(44KW)
1.5 17|70PS(51KW)
1.1 17|50PS(37KW)
Motor Motorcode
1.6 TD 16|70PS(51KW)
1.5 16|70PS(51KW)
1.3 16|60PS(44KW)
1.6 16|75PS(55KW)
1.6 16|85PS(63KW)
1.6 GLI 16|110PS(81KW)
1.8 16|112PS(82KW)
1.5 D 16|50PS(37KW)
1.1 16|50PS(37KW)
1.6 D 16|54PS(40KW)

Motor Motorcode
1.8 14|95PS(70KW)
1.5 14|70PS(51KW)
1.6 14|75PS(55KW)
1.6 D 14|55PS(40KW)

Motor Motorcode
1.6 53|70PS(51KW)
1.3 53|60PS(44KW)
1.5 53|75PS(55KW)
1.5 53|86PS(63KW)
1.6 53|75PS(55KW)
1.6 53|85PS(63KW)
1.1 53|50PS(37KW)
1.6 53|110PS(81KW)
1.5 53|70PS(51KW)

Motor Motorcode
1.8 155|95PS(70KW)
1.8 155|90PS(66KW)
1.8 155|111PS(82KW)
1.8 155|112PS(82KW)
1.6 155|72PS(53KW)
1.3 155|54PS(40KW)
1.6 155|75PS(55KW)
1.5 155|70PS(51KW)
1.8 155|98PS(72KW)
1.6 155|110PS(81KW)

Motor Motorcode
1.6 GTI 17|110PS(81KW)
1.5 D 17|50PS(37KW)
1.1 17|52PS(38KW)
1.6 TD 17|70PS(51KW)
1.8 GTI 17|112PS(82KW)
1.6 17|75PS(55KW)
1.6 D 17|54PS(40KW)
1.3 17|60PS(44KW)
1.5 17|70PS(51KW)
1.1 17|50PS(37KW)

Motor Motorcode
1.6 TD 16|70PS(51KW)
1.5 16|70PS(51KW)
1.3 16|60PS(44KW)
1.6 16|75PS(55KW)
1.6 16|85PS(63KW)
1.6 GLI 16|110PS(81KW)
1.8 16|112PS(82KW)
1.5 D 16|50PS(37KW)
1.1 16|50PS(37KW)
1.6 D 16|54PS(40KW)

Average rating of 4.9 out of 5 stars

VW Golf 1 2 3 Corrado Passat G60 16V Vr6 Braking force regulator 486145 Conversion Rear axle brake system Brake caliper adapter Brake nipple
  • ✓ Brake force regulator 3/15
  • ✓ conversion to G60 16V VR6
  • ✓ OE NO: 486145

€134.02*
Item number: 396

Average rating of 4.9 out of 5 stars

Gearbox Mounting Bracket Golf 1 Caddy 1.8 T 02A Gearbox Engine Bracket Set
  • ✓ Golf 1, Caddy 14d, Scirroco 1, Jetta 1&2
  • ✓ 02A/02J gearbox, 1.8T from Golf 4
  • ✓ Golf 1 bearing outer diameter 64mm

€125.96*
Item number: 323

Average rating of 5 out of 5 stars

Adapter Nipple Hose Conversion Hydraulic Clutch VW Golf 1 2 3 Slave Cylinder Golf 4 Audi A3 Seat Leon 02a 02j 02m Gearbox
  • ✓ Hydraulic clutch slave cylinder
  • ✓ Golf 1, 2, 3, Audi A3, Seat Leon
  • ✓ Conversion to 6-speed 02M,/02Q or 5-speed 02A,/02J transmission

€11.20*
Item number: 952

Average rating of 4.9 out of 5 stars

Engine bracket Golf Scirocco Caddy 1 Rubber Gearboc cradle Motor holder PU Shore 65-70
  • ✓ Complete set of 4
  • ✓ Reinforced Shore 65-70
  • ✓ Golf 1 Caddy 14D Scirocco Jetta

€86.63*
Item number: 445
Golf MK1 Caddy Brake Caliper Adapter G60 S2 Adapter Brake System
  • ✓ 280x22 535615301 G60 brake disc
  • ✓ 1-piston Girling 54 443615124A / 443615123A brake caliper
  • ✓ front axle

€105.69*
Item number: 216

Average rating of 4.8 out of 5 stars

Conversion Kit for VW Golf 1 Caddy Scirocco Umbausatz to Hydraulic Clutch Engine Conversion 1,8T Golf 4
  • ✓ Hydraulic clutch complete conversion kit
  • ✓ Golf 1, Golf 1 Cabrio, Caddy 14D, Jetta, Scirocco
  • ✓ Engine conversion from the Golf 4, original pedals are retained

€168.14*
Item number: 977

Average rating of 4.9 out of 5 stars

VW Golf MK2 MK 3 G60 VR6 Conversion Kit Gearbox Clutch Cable Bearing Mechanical Clutch 1.8T 02A Gearbox
  • ✓ Complete KIT
  • ✓ length 1.34m
  • ✓ OE NR: C357721335E

€177.90*
Item number: 112

Average rating of 5 out of 5 stars

VW Golf 1 Caddy 14d Scirocco Short shifter in stainles steel
  • ✓ Registration free
  • ✓ For shift linkage
  • ✓ stainless steel

€33.74*
Item number: 355

Average rating of 5 out of 5 stars

Bolt circle adapter VW 4x100 on 5x112 Audi 20mm Wheel plates
  • ✓ 4x100 to 5x112
  • ✓ 20mm per side
  • ✓ 57.1 -> 57.1 centering

€66.00*
Item number: 246

Average rating of 5 out of 5 stars

VW Golf MK1 MK2 MK3 Mounting Bracket for 16V 1.8T VR6 Conversion Clutch Cable G60 Gearbox Bracket
  • ✓ VW Golf 2, Golf 3 Passat, Corrado, Jetta, Vento
  • ✓ 02a 02j 5 gear
  • ✓ 1.8T 16V G60 conversion

€32.99*
Item number: 116

Average rating of 4.8 out of 5 stars

Golf MK1 Caddy Scirocco Conversion Gas Pedal Accelerator Adapter Trottle Control for Golf MK4 DBW R32 V6 TDI Accelerator Cable
  • ✓ For Golf 1 Caddy
  • ✓ On Golf 4 Accelerator Pedal
  • ✓ OE:VW 1J1721503E

€55.32*
Item number: 871

Average rating of 5 out of 5 stars

VW Engine Mounting Bracket Golf MK1 Caddy 1,8T G60 1,9 TDI 02A 02J 02M Gearbox 4 Cylinder Engine COnversion Bracket
  • ✓ Golf 1, Caddy 14d, Scirroco 1, Jetta
  • ✓ 02A/ 02J 5-speed, 02M 6-speed gearbox
  • ✓ 1.8T, 1.9TDI, G60

€128.10*
Item number: 724

Average rating of 4.7 out of 5 stars

Tension Pulley Adapter Socket VW Golf Caddy Scirocco Engine 1,8T AGU 20V 1,9 TDI BAM AGU Conversion
  • ✓ mechanical tension roller
  • ✓ 1.8T engine conversion
  • ✓ Golf 1, Scirocco, Caddy 14d

€26.09*
Item number: 939

Average rating of 5 out of 5 stars

VW Golf Corrado Polo Passat Scirrocco Camber correction plates Camber regolation Rear axle

Camber correction plates for installation on rear axle.Allow a perfect camber adjustment on your vehicle.

€45.84*
Item number: 296-20G

Average rating of 4.8 out of 5 stars

6 Speed Manual Gearbox Conversion Kit 02M 4motion VR6 R32 Golf MK1 2 3 4 Turbo
  • ✓ 02M transmission conversion to FWD
  • ✓ simple conversion
  • ✓ Golf 1, Golf 2, 3, Golf 4 series

€112.08*
Item number: 698

Average rating of 4.8 out of 5 stars

Gearbox Setting Adjust Gauge 020 Gearbox Adjustment 4 and 5 sSpeed VAG Golf MK1 2 3
  • ✓ 020 Gearbox
  • ✓ 4&5Gang
  • ✓ OE:VAG WZ 3104

€12.37*
Item number: 164

Average rating of 5 out of 5 stars

Brake fluid reservoir Brake fluid reservoir master cylinder Golf 1 Golf 2 Caddy Corrado Scirocco T4 Bus
  • ✓ Suitable for our master brake cylinders
  • ✓ plug and play
  • ✓ quickly installed

€23.99*
Item number: 1159

Average rating of 5 out of 5 stars

Reinforced Engine Mounting Bearing Gearbox Mounting Bearing Golf 1 Scirocco Caddy Jetta 171 199 214G 75mm Ø Shore Hardness 68
  • ✓ 74.5mm diameter
  • ✓ OEM no.: 171 199 214G
  • ✓ reinforced Shore 68

€24.05*
Item number: 990

Average rating of 4 out of 5 stars

Clutch Slave Cylinder VW Golf MK4 Audi A3 Conversion Hydraulic Clutch 1J0721261D
  • ✓ Hydraulic clutch slave cylinder
  • ✓ Golf 4, Audi A3, Seat Leon, Skoda Oktavia
  • ✓ 1J0721261D

€38.36*
Item number: 1050

Average rating of 5 out of 5 stars

VW Golf Caddy Scirocco Motor cradle 1,8T AGU Modification Turbo Motor holder Motor exchange
  • ✓ Golf 1, Scirocco, Caddy 14D
  • ✓ 1.8l 20vT, 1.9 TDI
  • ✓ simple engine conversion

€35.29*
Item number: 389