Steel Braided Brake Line VW Golf MK1 MK2 MK3 G60 Passat Scirocco Polo Corrado Jetta Conversion G60 Brake T5 T6 rear axle
- ✓ Length: 32cm
- ✓ M10x1 curved on the outside
- ✓ M10x1 straight on the inside
€110.15*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Longer steel braided brake line / steel flexible brake hoses, including material certificate, for conversion to larger brake system e.g. G60 in model Golf MK1
Suitable for the following models:
- Golf MK1
- VW Golf MK 2 and MK3
- VW Passat
- VW Corrado
- VW Jetta
- VW Polo
- Seat Toledo
Advantages compared to original brake lines:
- no loss of pressure when braking. Exact pressure point
- easy assembly. The original line is simply replaced by the braided steel line
- no swelling as with rubber lines
- cost savings, because the braided steel lines do not need to be changed every 3 or 5 years
- shorter braking
- material certificate
- protection against the rodents
- great optics
Technical data:
- lenght: 32 cm
- Connection 1 M10x1 external thread bent
- Connection 2 M10x1 internal thread straight
- 90° flanging our fittings are so-called hermaphrodites, which means that every connection fits regardless of whether concave or convex
Delivery:
- 2x steel braided brake lines / steel flexible brake hoses for VW Golf MK1 MK2 MK3 G60 Passat Scirocco Polo Corrado Jetta etc...
- material certificate
Nous fabriquons aussi sur mesure. Avec notre configurateur de durites de frein en acier (cliquez ici), tu peux configurer ta durite de frein en acier selon tes souhaits. (longueur, couleur et raccords)
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Login
14 January 2020 10:29
rodriguez051088
super klasse top kontakt gerne wieder
24 January 2020 21:28
mathias5605
ALLES BESTENS. TOP WARE. SCHNELLER VERSAND
28 March 2020 22:15
Thorsten H
Einbau war einfach u passgenau. Zum Ergebnis bzw. zum Test bin ich noch nicht gekommen und wir auch noch paar tage dauern.
3 February 2020 16:33
mathias5605
ALLES BESTENS. TOP WARE. SCHNELLER VERSAND
11 February 2021 12:13
Christian R
Kann noch nichts dazu sagen, weil ich die Teile noch nicht verbaut habe
- Does the steel braided line also fit other vehicles?
Yes – basically the braided steel line can also fit many other vehicles if the connection data matches. In practice, many manufacturers use very similar thread sizes for brake line fittings, so using them across different models is often possible.
What really matters
To ensure the line fits securely and tightly, you need to match three main points:
Thread size / connection
The key factor is what thread your vehicle has at the connection points (e.g., at the fixed line connection or brake caliper).
This thread size must match the fittings of the line.
Sealing surface (concave or convex)
Often, the problem is not the thread, but the sealing shape on the counterpart:
concave (valley) or
convex (hill)
Our fittings are so-called “hybrid” connections. This means: Each connection is designed to reliably seal with both concave and convex sealing surfaces. This makes the line significantly more versatile.
Length and routing
You need to determine the required length suitable for your vehicle (ideally as described above: fully extend, simulate routing, check steering).
Only if the line is long enough and can be routed cleanly is it truly suitable.
How to quickly check if it fits
Determine the thread size on the vehicle (and compare it with the data of the line)
Measure the line length
Check the technical data in the product description – there you will find all the details about the line and the connections.
- Two lens gaskets were supplied with the Steelflex lines. Where exactly are these installed?
The 2 lens seals are not automatically always installed, but only when they are needed to compensate for the sealing cone on the respective counterpart. Background: Depending on the vehicle/connection, there are different flaring or sealing shapes – and that's exactly why the lenses are always provided as a precaution.
What are the lens seals for?
They serve as a compensating piece when the cone on the connection (counterpart) does not perfectly match the steel braided hose. This ensures that the connection seals cleanly.
Where are they used?
If needed, the lens seals are placed directly into the connection with internal thread – that is, into the “female” fitting on the vehicle/distributor/brake caliper, before you screw in the hose.
The hose presses the lens into its seat when tightened, thus creating the seal.When do you need them – and when not?
F flare (DIN/ISO cone, usually fits):
→ Lens seals are not needed.
The hose usually seals directly over the matching cone here.E flare:
→ Lens seals must be used.
Simply place it into the internal thread, then screw in the hose and tighten as usual.
Installation note
The installation direction does not matter – you can install the lens either way, it makes no difference.
| Motor | Motorcode |
|---|---|
| 1.1 | 16|50PS(37KW) |
| 1.6 | 16|85PS(63KW) |
| 1.8 | 16|112PS(82KW) |
| 1.6 | 16|75PS(55KW) |
| 1.6 TD | 16|70PS(51KW) |
| 1.6 D | 16|54PS(40KW) |
| 1.5 | 16|70PS(51KW) |
| 1.6 GLI | 16|110PS(81KW) |
| 1.3 | 16|60PS(44KW) |
| 1.5 D | 16|50PS(37KW) |
| Motor | Motorcode |
|---|---|
| 1.6 | 14|75PS(55KW) |
| 1.5 | 14|70PS(51KW) |
| 1.8 | 14|95PS(70KW) |
| 1.6 D | 14|55PS(40KW) |
| Motor | Motorcode |
|---|---|
| 1.8 GTI | 17|112PS(82KW) |
| 1.1 | 17|52PS(38KW) |
| 1.6 GTI | 17|110PS(81KW) |
| 1.3 | 17|60PS(44KW) |
| 1.5 D | 17|50PS(37KW) |
| 1.1 | 17|50PS(37KW) |
| 1.5 | 17|70PS(51KW) |
| 1.6 TD | 17|70PS(51KW) |
| 1.6 D | 17|54PS(40KW) |
| 1.6 | 17|75PS(55KW) |
| Motor | Motorcode |
|---|---|
| 1.5 | 155|70PS(51KW) |
| 1.6 | 155|110PS(81KW) |
| 1.6 | 155|75PS(55KW) |
| 1.6 | 155|72PS(53KW) |
| 1.8 | 155|98PS(72KW) |
| 1.8 | 155|95PS(70KW) |
| 1.8 | 155|90PS(66KW) |
| 1.3 | 155|54PS(40KW) |
| 1.8 | 155|111PS(82KW) |
| 1.8 | 155|112PS(82KW) |
| Motor | Motorcode |
|---|---|
| 1.3 | 53|60PS(44KW) |
| 1.5 | 53|75PS(55KW) |
| 1.6 | 53|70PS(51KW) |
| 1.6 | 53|85PS(63KW) |
| 1.1 | 53|50PS(37KW) |
| 1.6 | 53|75PS(55KW) |
| 1.5 | 53|86PS(63KW) |
| 1.5 | 53|70PS(51KW) |
| 1.6 | 53|110PS(81KW) |
| Motor | Motorcode |
|---|---|
| 1.1 | 16|50PS(37KW) |
| 1.6 | 16|85PS(63KW) |
| 1.8 | 16|112PS(82KW) |
| 1.6 | 16|75PS(55KW) |
| 1.6 TD | 16|70PS(51KW) |
| 1.6 D | 16|54PS(40KW) |
| 1.5 | 16|70PS(51KW) |
| 1.6 GLI | 16|110PS(81KW) |
| 1.3 | 16|60PS(44KW) |
| 1.5 D | 16|50PS(37KW) |
| Motor | Motorcode |
|---|---|
| 1.6 | 14|75PS(55KW) |
| 1.5 | 14|70PS(51KW) |
| 1.8 | 14|95PS(70KW) |
| 1.6 D | 14|55PS(40KW) |
| Motor | Motorcode |
|---|---|
| 1.8 GTI | 17|112PS(82KW) |
| 1.1 | 17|52PS(38KW) |
| 1.6 GTI | 17|110PS(81KW) |
| 1.3 | 17|60PS(44KW) |
| 1.5 D | 17|50PS(37KW) |
| 1.1 | 17|50PS(37KW) |
| 1.5 | 17|70PS(51KW) |
| 1.6 TD | 17|70PS(51KW) |
| 1.6 D | 17|54PS(40KW) |
| 1.6 | 17|75PS(55KW) |
| Motor | Motorcode |
|---|---|
| 1.5 | 155|70PS(51KW) |
| 1.6 | 155|110PS(81KW) |
| 1.6 | 155|75PS(55KW) |
| 1.6 | 155|72PS(53KW) |
| 1.8 | 155|98PS(72KW) |
| 1.8 | 155|95PS(70KW) |
| 1.8 | 155|90PS(66KW) |
| 1.3 | 155|54PS(40KW) |
| 1.8 | 155|111PS(82KW) |
| 1.8 | 155|112PS(82KW) |
| Motor | Motorcode |
|---|---|
| 1.3 | 53|60PS(44KW) |
| 1.5 | 53|75PS(55KW) |
| 1.6 | 53|70PS(51KW) |
| 1.6 | 53|85PS(63KW) |
| 1.1 | 53|50PS(37KW) |
| 1.6 | 53|75PS(55KW) |
| 1.5 | 53|86PS(63KW) |
| 1.5 | 53|70PS(51KW) |
| 1.6 | 53|110PS(81KW) |
- ✓ 280x22 535615301 G60 brake disc
- ✓ 1-piston Girling 54 443615124A / 443615123A brake caliper
- ✓ front axle
- ✓ Golf 1, Caddy 14d, Scirroco 1
- ✓ VR6 1.8T engine
- ✓ stable cross member front panel
- ✓ Complete kit
- ✓ front axle: OE quality
- ✓ 280x22 535615301 Golf G60 brake disc
- ✓ 1-piston 996352421 / 996352422 Porsche 996 8N0615423C / 8N0615424C Audi S3 8L / VW Golf R32 brake caliper
- ✓ rear axle
- ✓ Bore 11mm
- ✓ 90° bent
- ✓ for welding/screwing
- ✓ 35% better braking performance
- ✓ 75% more service life
- ✓ low dust generation
- ✓ For G60 16V brake
- ✓ Golf 1 Golf 2 Golf 3
- ✓ original equipment manufacturer quality
- ✓ Brake force regulator 3/15
- ✓ conversion to G60 16V VR6
- ✓ OE NO: 486145
- ✓ Reinforced version
- ✓ 02A 02J gearbox
- ✓ G60 VR6 in Golf 1
- ✓ Reinforced version
- ✓ 02A 02J gearbox
- ✓ G60 VR6 in Golf 1
- ✓ for rear axle: Golf MK1, Golf MK1 Cabrio, MK2, MK3, GTI, VR6, Caddy 14d,Jetta, Corrado, Passat 35i, Scirrocco, Vento, Polo 6N1, Seat Cordoba, Ibiza,Toledo
- ✓ brake caliper: Porsche , reference: 996.352.421 + 996.352.422
- ✓ rear axle: brake caliper with mounting brackets from Audi S3 8L or VW Golf R32
- ✓ brake disc: Passat 35i 280mm
- ✓ Desired dimensions
- ✓ Quickly configurable
- ✓ Length, color and connections freely selectable
- ✓ Front axle right
- ✓ Golf 1 Cabrio, Scirocco 1, Caddy Jetta
- ✓ G60 1.8T 1.9TDI 100 flange
- ✓ 280x22
- ✓ 65mm centering
- ✓ 39.5mm height
- ✓ Length: 63cm
- ✓ M10x1 outside 45° curved
- ✓ M10x1 inside straight
- ✓ 310x22 1K0615601N Golf 5 R brake disc
- ✓ 4-piston 955352421 / 955352422 Porsche Cayenne brake caliper
- ✓ rear axle
- ✓ mechanical tension roller
- ✓ 1.8T engine conversion
- ✓ Golf 1, Scirocco, Caddy 14d