Drive Shaft VW Golf Mk2 Mk3 Plus Axle/ VR6 Axle conversion 02M 02Q 6-speed
- ✓ VR6 plus axle
- ✓ VW Golf 2 Golf 3
- ✓ 02M/02Q 6-speed gearbox, only for FWD
€331.99*
- TÜV registration free
- 15 years expert knowledge
- shipping within 24h
- 2 years warranty
Drive shaft set for all VW Golf Mk2 and Golf Mk3, plus axle VR6. Absolutely necessary if you want to convert your vehicle to the 02M/2Q 6-speed gearbox (only FWD - Front-Wheel-Drive).
We also have the right engine and gearbox mounting bracket, as well as the right adapters to convert the 02M 6-speed to front-wheel drive. Just have a look in our shop or below in the accessories.
It is important that when installing the new drive shaft, there is no excess pressure in the sleeve/gaiter. In our installation instructions you can see how to prevent thist (click here).
Advantages of the drive shaft:
- stable up to 800 hp
- fit 100%
- solid shaft made of special high-strength material
- easy assembly
Delivery:
- 1x drive shaft for Golf Mk2 Golf plus axle VR6, stable up to 800 hp
Our drive shafts are registration-free and therefore do not have to be registered.
Login
- What exactly is the benefit of a shorter drive shaft?
Lowering changes the axle geometry and the shaft presses on the wheel bearing, exposing it to high wear and possibly destroying it in the worst case. Therefore, it is absolutely necessary to relieve the pressure from the component. This is done by shortening the shafts.
- Do the reinforced drive shafts also have reinforced joints?
On the wheel side, the joints are also reinforced, but the inner joints are like the standard joints.
- Why are two bags of grease included in the package?
The grease is included so that additional greasing can be done, or if the gearbox flange is open at the back. In this case, greasing must still be done there. If the shaft is delivered completely closed, greasing is not necessary as it has already been done.
- Why are no backing plates (OE: 1K0407357D) included for mounting as they are originally available?
We do not supply the base plates, as we install the latest version of the bellows. With these, the base plates are no longer needed.
| Motor | Motorcode |
|---|---|
| 2.9 VR6 Syncro | 3A5|184PS(135KW) |
| 2.8 VR6 | 3A5|174PS(128KW) |
| 2.9 VR6 Syncro | 35I|184PS(135KW) |
| 2.8 VR6 | 35I|174PS(128KW) |
| Motor | Motorcode |
|---|---|
| 2.8 VR6 | 3A2|174PS(128KW) |
| 2.8 VR6 | 35I|174PS(128KW) |
| Motor | Motorcode |
|---|---|
| 2.8 VR6 Syncro | 7M9|174PS(128KW) |
| 2.8 VR6 | 7M6|174PS(128KW) |
| 2.8 VR6 Syncro | 7M6|174PS(128KW) |
| 2.8 VR6 Syncro | 7M8|174PS(128KW) |
| 2.8 VR6 | 7M8|174PS(128KW) |
| 2.8 VR6 | 7M9|174PS(128KW) |
| Motor | Motorcode |
|---|---|
| 2.8 VR6 | 1H1|174PS(128KW) |
| 2.9 VR6 Syncro | 1H1|190PS(140KW) |
| Motor | Motorcode |
|---|---|
| 2.9 VR6 Syncro | 1H5|190PS(140KW) |
| Motor | Motorcode |
|---|---|
| 2.9 VR6 | 53I|190PS(140KW) |
| Motor | Motorcode |
|---|---|
| 2.8 VR6 | 1H2|174PS(128KW) |
| Motor | Motorcode |
|---|---|
| 2.9 VR6 Syncro | 3A5|184PS(135KW) |
| 2.8 VR6 | 3A5|174PS(128KW) |
| 2.9 VR6 Syncro | 35I|184PS(135KW) |
| 2.8 VR6 | 35I|174PS(128KW) |
| Motor | Motorcode |
|---|---|
| 2.8 VR6 | 3A2|174PS(128KW) |
| 2.8 VR6 | 35I|174PS(128KW) |
| Motor | Motorcode |
|---|---|
| 2.8 VR6 Syncro | 7M9|174PS(128KW) |
| 2.8 VR6 | 7M6|174PS(128KW) |
| 2.8 VR6 Syncro | 7M6|174PS(128KW) |
| 2.8 VR6 Syncro | 7M8|174PS(128KW) |
| 2.8 VR6 | 7M8|174PS(128KW) |
| 2.8 VR6 | 7M9|174PS(128KW) |
| Motor | Motorcode |
|---|---|
| 2.8 VR6 | 1H1|174PS(128KW) |
| 2.9 VR6 Syncro | 1H1|190PS(140KW) |
| Motor | Motorcode |
|---|---|
| 2.9 VR6 Syncro | 1H5|190PS(140KW) |
| Motor | Motorcode |
|---|---|
| 2.9 VR6 | 53I|190PS(140KW) |
| Motor | Motorcode |
|---|---|
| 2.8 VR6 | 1H2|174PS(128KW) |
- ✓ For Golf 2 Corrado
- ✓ On Golf 4 Accelerator Pedal
- ✓ OE:6Q1723503K
- ✓ Length: 57cm
- ✓ M10x1 curved on the outside
- ✓ M10x1 straight on the inside
- ✓ gearbox holder
- ✓ Golf 2, Golf 3, Passat, Corrado, Jetta, Vento
- ✓ 02m / R32 V6 1.8T 6-speed gearbox DRP DQB DXW
- ✓ G60 GTI 16V engines
- ✓ 228 clutch
- ✓ lightens 4.1 kg
- ✓ Complete KIT
- ✓ length 1.34m
- ✓ OE NR: C357721335E
- ✓ Passat 35I Golf 2 GTI G60
- ✓ OE NR: 357 721 401
- ✓ Golf1 Caddy conversion
- ✓ 4x100 to 5x112
- ✓ 20mm per side
- ✓ 57.1 -> 57.1 centering
- ✓ Release lever reinforced
- ✓ G60, VR6, 2L 16V, GTI, TDI, Corrado, Golf 2/ 3, Passat
- ✓ 02A/02J gearbox
- ✓ VW Golf 2, Golf 3 Passat, Corrado, Jetta, Vento
- ✓ 02a 02j 5 gear
- ✓ 1.8T 16V G60 conversion
- ✓ 312x25 1J0615301AA 1J0615302A S3 / R32 brake disc
- ✓ 1-piston 1J0615123E / 1J0615124E S3 / R32 brake caliper
- ✓ front axle
- ✓ 334x32 1J0615301AA 1J0615302 A Golf 4 brake disc
- ✓ 6-piston 7L6615123T / 7L6615124T Porsche Cayenne/ VW Tuareg brake caliper
- ✓ front axle
- ✓ 02M transmission conversion to FWD
- ✓ simple conversion
- ✓ Golf 1, Golf 2, 3, Golf 4 series
Camber correction plates for installation on rear axle.Allow a perfect camber adjustment on your vehicle.
Camber correction plates for installation on rear axle.Allow a perfect camber adjustment on your vehicle.
- ✓ 020 Gearbox
- ✓ 4&5Gang
- ✓ OE:VAG WZ 3104
- ✓ Suitable for our master brake cylinders
- ✓ plug and play
- ✓ quickly installed
- ✓ VW Golf 2, Golf 3 Passat, Corrado, Jetta, Vento
- ✓ Golf 3 16V, 1.8T transverse installation, Golf 4TDI
- ✓ 4 motions
- ✓ No more play
- ✓ High quality brass
- ✓ For all 02m 02q 02a and 02j gearboxes