Which RAL colors can we not offer for the coating of our brake calipers?

We can paint your brake calipers in almost all common RAL colors. However, an exception is RAL fluorescent colors (neon/fluorescent colors) – we cannot offer these for brake caliper painting.The reason: fluorescent colors work technically different from normal RAL colors (they require special pigments/layer structures) and are significantly more sensitive in the "brake" application area. For a consistently clean, robust surface, we therefore rely on paint structures that have proven themselves in the brake area – and fluorescent RAL is excluded here.We do not offer these RAL fluorescent colors (examples)RAL 1026 Fluorescent YellowRAL 2005 Fluorescent OrangeRAL 2007 Fluorescent Light OrangeRAL 3024 Fluorescent RedRAL 3026 Fluorescent Light RedRAL 6038 Fluorescent GreenTip: If you want a "neon look," we often find a very similar non-fluorescent RAL alternative that is visually close and much more suitable for brake calipers.

My brake caliper is not exactly centered over the brake disc - what should I do?

If your brake caliper is not exactly centered over the brake disc, in most cases it is not a problem. Depending on the vehicle, model year, and mileage, axle tolerances can occur – and this even in newer vehicles.The most important thing is:👉 The brake caliper must have sufficient clearance on the left and right to the brake disc so that nothing rubs or permanently touches it.Many brake calipers also have locking bolts. It may happen that:there is very little clearance on one side or the bolt lightly toucheswhile on the other side there is more playThis is generally not critical.🔧 This is how you proceed:Install brake pads:First check if the brake pads can be inserted cleanly and without resistance on both sides.If everything fits:If installation is possible without problems, you can simply gently push back the locking bolts – this usually resolves the issue.If it jams:If the brake pads cannot be installed, or only with difficulty, on one side, action is required.In this case, you can:slightly shim the adapter with suitable bushings to adjust the brake caliperor – depending on the situation – slightly mill the adapter so that the brake caliper is correctly centered again👉 The goal is always that the brake caliper is evenly aligned with the brake disc and the brake pads are seated freely and cleanly.

What torque should be used to tighten the sealing nipples on the brake caliper?

We recommend tightening the sealing nipples on the brake caliper with 20 Nm.Why is this important?The correct torque ensures a secure seal. A too loose fit can lead to leaks, whereas over-tightening can damage threads or components.Should a torque wrench be used?Yes, for precise and safe installation, we recommend using a torque wrench.Should anything be checked after installation?Yes, the sealing nipple should be checked for tight fit and sealing afterward.

Big Brake systems KIT VW Golf 3 Porsche VR6 GTI Passat 35 16V ZL17 ZR17 Brake caliper 334x32mm Brake disc - Farbe Bremssattel: Blank ohne Farbe

✓ 334x32 1J0615301AA 1J0615302 A Golf 4 brake disc
✓ 6-piston 7L6615123T / 7L6615124T Porsche Cayenne/ VW Tuareg brake caliper
✓ front axle

€1,433.40*

Available

Product number: 284-KIT-Blank

Delivery by Thursday, 27.08.2026 if you order within the next 16 Hours.

Brake caliper color

Blank without color

Red with Epytec logo

Painted in the color of your choice

Express shopping
Save your data and settings
Order overview and shipping information
Manage your newsletter subscription
19 Jahre Expertenwissen

With our big brake kit for the Audi A4 B5 VW Passat and many other cars, you can convert your front axle to a 6-piston brake system and achieve ideal performance.

With this high performance brake kit you can use the Porsche ZR17/ZL17 6-piston Brembo calipers in combination with the 334x32 mm brake discs from Golf 4 R32 on the Golf 3, Passat and many other cars

Another advantage of our brake system kit is that it is equipped with the same original brake calipers and brake discs that are installed in series-production cars. These OE parts not only make the replacement of the brakes simple and uncomplicated, but also facilitate the registration with the TÜV.

The big brake kit is not only sporty, but also suitable for everyday use and, thanks to the perforated sports brake discs in conjunction with our ceramic lining, enables ideal performance while reducing brake dust, temperature and wear.

With this high-performance big brake kit, you can get started straight away and have everything you need to convert your front axle to a 6-piston brake system.

The high performance big brake kit is suitable for the following cars :

VW Golf 3 2,0l 16V und VR6 GTI
VW Passat 2,0l 16V 35i und VR6 GTI
VW Corrado 2,0l 16V und VR6 GTI
Seat Toledo

Advantages of this big brake kit:

our components, such as brake callipers and brake discs, come from series-production cars and are OE parts. This makes replacing the brakes simple and uncomplicated and facilitates registration with the TÜV.
The material certificate included in the scope of delivery enables registration by individual acceptance even for series-production cars.
High-performance brake pads with longer service life than the original pads
extreme deceleration values also in combination with our rear axle brake system
directly fitting to the above mentioned models and therefore easily rebuildable to original condition at any time
our EPYTEC brake caliper adapters require no sending in of your stock parts, no re-welding, re-milling or re-drilling.

Note:

Please note that these brake calipers are delivered without paint so that you can paint them yourself.

Get our high performance brake kit now and experience ideal performance and durability.

Scope of delivery:

2x new Porsche Cayenne brake calipers ZR17 /ZR18 part number: 7L6 615 123 T / 7L6 615 124 T (left/right) including complete new brake caliper bracket kit without color in blank
matching set of EBC Sport brake discs Turbo Groove 334x32mm
2x ceramic brake pads for less brake dust and longer lifetime
2x brake caliper adapter for VW Golf 3, VW Passat, VW Corrado, Seat Toledo
2x matching steel braided lines
Assembly aid for brake disc assembly
high strength bolt material
Template to check whether the brake system fits under your rim
Material certificate
Stress analysis / FEM calculation for registration

We provide a TÜV certificate with this adapter. This means that the TÜV inspector can easily register the adapter.

Tips, information and advice:

To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
We cannot give you a generalised answer as to which rim size you can ride after your brake conversion. There are simply too many different wheel rims. For this reason, we have developed a template with which you can easily check whether the brake system kit fits under your rim. We have included a link to the template in the description. If your rim does not fit, you can simply use wheel spacers. >> Go directly to customised wheel spacers <<

Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.

Brake caliper type: Z17 6-Kolben

Manufacturer: Epytec

Mounting location: front

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

email address

password

or Register with...

No reviews found. Share your insights with others.

Motor	Motorcode
2.9 VR6 Syncro	1H5\|190PS(140KW)

Motor	Motorcode
2.8 VR6	3A2\|174PS(128KW)
2.8 VR6	35I\|174PS(128KW)

Motor	Motorcode
2.9 VR6 Syncro	3A5\|184PS(135KW)
2.8 VR6	3A5\|174PS(128KW)
2.8 VR6	35I\|174PS(128KW)
2.9 VR6 Syncro	35I\|184PS(135KW)

Motor	Motorcode
2.8 VR6	1H2\|174PS(128KW)

Motor	Motorcode
2.9 VR6 Syncro	1H1\|190PS(140KW)
2.8 VR6	1H1\|174PS(128KW)

Motor	Motorcode
2.9 VR6	53I\|190PS(140KW)

Motor	Motorcode
2.9 VR6 Syncro	1H5\|190PS(140KW)

Motor	Motorcode
2.8 VR6	3A2\|174PS(128KW)
2.8 VR6	35I\|174PS(128KW)

Motor	Motorcode
2.9 VR6 Syncro	3A5\|184PS(135KW)
2.8 VR6	3A5\|174PS(128KW)
2.8 VR6	35I\|174PS(128KW)
2.9 VR6 Syncro	35I\|184PS(135KW)

Motor	Motorcode
2.8 VR6	1H2\|174PS(128KW)

Motor	Motorcode
2.9 VR6 Syncro	1H1\|190PS(140KW)
2.8 VR6	1H1\|174PS(128KW)

Motor	Motorcode
2.9 VR6	53I\|190PS(140KW)

VW Golf 3 Brake Caliper Adapter Porsche Vr6 GTI Passat 35 16V ZR17 ZL17 Touareg BM5 Front axle Brake System 334x32

✓ 334x32 1J0615301AA 1J0615302 A Golf 4 brake disc
✓ 6-piston 7L6615123T / 7L6615124T Porsche Cayenne/ VW Tuareg brake caliper
✓ front axle

€133.47*

Product number: 284

Big Brake systems KIT VW Golf 3 Porsche VR6 GTI Passat 35 16V ZL17 ZR17 Brake caliper 334x32mm Brake disc - Farbe Bremssattel: Blank ohne Farbe

The high performance big brake kit is suitable for the following cars :

Advantages of this big brake kit:

Note:

Scope of delivery:

Tips, information and advice:

Login

VW

Golf 3 Variant

Passat

Passat Variant

Vento

Golf 3

Corrado

Individual articles in KIT

Passendes Zubehör zusammen kaufen und sparen