Which brake pads should be used?

The original brake pads from the brake caliper, which is required for our conversion kit, must always be used.

Can I use other brake calipers as indicated in the required components?

No, unfortunately that is not possible, the reason being that all brake calipers have different height and depth measurements. If another brake disc is installed, the brake caliper would either not fit the adapter at all or not run centrally to the brake disc. If you want to install a different brake caliper, we also have an option for you. You can have a custom-made product manufactured, check out the following link for more information:

Can I also use other discs as specified in the required components?

No, unfortunately that is not possible. The reason is simply that all brake calipers have different height and depth measurements. If a different brake disc is installed, the brake caliper would either not fit on the adapter at all or would not be centered with the brake disc. However, if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product produced, have a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems

My brake caliper is not exactly centered over the brake disc - what should I do?

If your brake caliper is not exactly centered over the brake disc, in most cases it is not a problem. Depending on the vehicle, model year, and mileage, axle tolerances can occur – and this even in newer vehicles.The most important thing is:👉 The brake caliper must have sufficient clearance on the left and right to the brake disc so that nothing rubs or permanently touches it.Many brake calipers also have locking bolts. It may happen that:there is very little clearance on one side or the bolt lightly toucheswhile on the other side there is more playThis is generally not critical.🔧 This is how you proceed:Install brake pads:First check if the brake pads can be inserted cleanly and without resistance on both sides.If everything fits:If installation is possible without problems, you can simply gently push back the locking bolts – this usually resolves the issue.If it jams:If the brake pads cannot be installed, or only with difficulty, on one side, action is required.In this case, you can:slightly shim the adapter with suitable bushings to adjust the brake caliperor – depending on the situation – slightly mill the adapter so that the brake caliper is correctly centered again👉 The goal is always that the brake caliper is evenly aligned with the brake disc and the brake pads are seated freely and cleanly.

VW Corrado Golf 2 3 Passat VR6 Cayenne ZR18 Brake Caliper Adapter R32 Front Axle Brake System

Name: VW Corrado Golf 2 3 Passat VR6 Cayenne ZR18 Brake Caliper Adapter R32 Front Axle Brake System
Brand: EPYTEC
SKU: 471
Price: 136.64 GBP
Availability: InStock
Rating: 5.0 (10 reviews)

✓ 334x32 1J0615301A 1J0615302A Golf 4 R3 brake disc
✓ 6-piston 95535142150 / 95535142250 Porsche Cayenne/ VW Tuareg brake caliper
✓ front axle

£136.64*

Prices incl. VAT plus shipping costs

10 Reviews

Available

Product number: 471

Delivery by Friday, 07.08.2026 if you order within the next 7 Hours.

Express shopping
Save your data and settings
Order overview and shipping information
Manage your newsletter subscription
19 Jahre Expertenwissen

Brake caliper adapter for Brembo/ Porsche 6-piston brake calipers in connection with the R32 brake disc 334 x 32mm on all VW with bolt circle connection 5x100 mm, VR6 engine and plus axle.

Suitable for:

Golf VR6
Corrado VR6
Passat 35i VR6

These calipers are used as standard for Porsche Cayenne, VW Touareg, and Q7.

The adapters could also be installed on other types of vehicles after a conversion to VR6 axle.

Required material for installation:

brake caliper: ZR18 Porsche Porsche Cayenne or VW Tuareg , reference 955.351.421.50 + 955.351.422.50
brake disc: Golf MK4 R32 334x32 mm , reference 1J0 615 301A +1J0 615 302 A

Advantages:

best possible delay values and performance! Also indispensable for performance increases
assembly option on all vehicles with wheel rims size 18' inch
Components come from series production by VW
If installed correctly, registration with the TÜV is possible.
Including complete screw material

Is not authorized under the STVO (German Road Licensing Law). However, thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles

Delivery:

2x brake caliper adapters, completely galvanized (see picture)
complete mounting screws set
material certificate
Template to check whether the brake system fits under your rim
tension analysis for easier homologation

We provide a TÜV certificate with this adapter. This means that the TÜV inspector can easily register the adapter.

Tips, information and notes:

For better ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, where you can assemble and then install them according to your requirements.click here for the steel braided line configurator >>configure steel braided brake line<<

Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.

Brake caliper hole spacing: 94

Hole spacing steering knuckle: 146

Manufacturer: Epytec

Mounting location: front

10 of 10 reviews

Leave a review!

Share your experiences with other customers.

Login

email address

password

or Register with...

Sort by

14 August 2019 21:07

Wilfried A

Die Produkte von Epytec sind durchdacht und sehr passgenau. Es sind so gut wie keine Fertigungstoleranzen, ersichtlich. Die Montage erfolgt mit den dazugehörigen Schreiben und Scheiben problemlos. Mein Tüv-Ingenieur ist begeistert von der Passgenauigkeit und Materialbeschaffenheit. Die nächsten Teile sind schon bestellt.

10 August 2023 13:04

Benjamin R

Bonjour je ne peux répondre à votre mail car je nai toujours pas reçu ma commande depuis 9jours Je trouve ça très long pour une commande qui vien dAllemagne jusquà la France .

10 August 2016 10:24

oktay31oktay

Top korrekt

19 June 2024 10:11

Michael L

Passt super

18 January 2024 20:32

Vautravers F

Rien à dire,piece qui s'adapte nikel Ne pas hésité à prendre contact avec eux pour vous projets

8 April 2019 15:45

Christopher B

Optisch machen die Adapter einen sehr guten Eindruck! Die Montage war einfach und reibungslos. Ich würde jedem der solch einen Umbau durchführen möchte diese Adapter empfehlen. zur Optimierung: Das Zertifikat könnte gleich beigelegt werden! Da man es für die Tüv Eintragung benötigt. Eure Firma kam Qualitativ und sehr strukturiert und mit viel Erfahrung rüber! Skeptisch war ich eigentlich nicht! Das Ergebnis nach dem Einbau war sehr zufriedenstellend.

5 July 2025 08:56

Héctor José D

Todo perfecto

13 March 2018 20:55

Christian B

Top Passen perfekt

19 March 2020 12:02

Fernando S

Je ne l'ai pas encore appliqué, mais je suis très satisfait du matériel. Lors de l'assemblage, j'envoie des photos.

17 May 2024 03:27

mangasvr6t

Perfecto los alemanes no fallan

Motor	Motorcode
2.8 VR6 Syncro	7M8\|174PS(128KW)
2.8 VR6	7M6\|174PS(128KW)
2.8 VR6 Syncro	7M9\|174PS(128KW)
2.8 VR6	7M9\|174PS(128KW)
2.8 VR6 Syncro	7M6\|174PS(128KW)
2.8 VR6	7M8\|174PS(128KW)

Motor	Motorcode
2.9 VR6	53I\|190PS(140KW)

Motor	Motorcode
2.9 VR6 Syncro	3A5\|184PS(135KW)
2.8 VR6	3A5\|174PS(128KW)
2.8 VR6	35I\|174PS(128KW)
2.9 VR6 Syncro	35I\|184PS(135KW)

Motor	Motorcode
2.8 VR6	3A2\|174PS(128KW)
2.8 VR6	35I\|174PS(128KW)

Motor	Motorcode
2.9 VR6 Syncro	1H5\|190PS(140KW)

Motor	Motorcode
2.8 VR6	1H1\|174PS(128KW)
2.9 VR6 Syncro	1H1\|190PS(140KW)

Motor	Motorcode
2.8 VR6	1H2\|174PS(128KW)

Motor	Motorcode
2.8 VR6 Syncro	7M8\|174PS(128KW)
2.8 VR6	7M6\|174PS(128KW)
2.8 VR6 Syncro	7M9\|174PS(128KW)
2.8 VR6	7M9\|174PS(128KW)
2.8 VR6 Syncro	7M6\|174PS(128KW)
2.8 VR6	7M8\|174PS(128KW)

Motor	Motorcode
2.9 VR6	53I\|190PS(140KW)

Motor	Motorcode
2.9 VR6 Syncro	3A5\|184PS(135KW)
2.8 VR6	3A5\|174PS(128KW)
2.8 VR6	35I\|174PS(128KW)
2.9 VR6 Syncro	35I\|184PS(135KW)

Motor	Motorcode
2.8 VR6	3A2\|174PS(128KW)
2.8 VR6	35I\|174PS(128KW)

Motor	Motorcode
2.9 VR6 Syncro	1H5\|190PS(140KW)

Motor	Motorcode
2.8 VR6	1H1\|174PS(128KW)
2.9 VR6 Syncro	1H1\|190PS(140KW)

Motor	Motorcode
2.8 VR6	1H2\|174PS(128KW)

Z18 Brake Caliper Epytec 6-Piston ZR18 ZL18 Porsche Cayenne VW Touareg Tuning Brake System

✓ Desired color can be selected
✓ ZR18 / ZL18 Cayenne brake calipers
✓ 95535142153 / 955.351.421.53 95535142253 / 955.351.422.53 7L6615123Q / 7L6615149 / 7L6615123J / 7L6615123N

£572.80*

£532.70

Product number: 1175

VW Corrado Golf 2 3 Passat VR6 Cayenne ZR18 Brake Caliper Adapter R32 Front Axle Brake System

Suitable for:

Required material for installation:

Advantages:

Delivery:

Tips, information and notes:

Login

VW

Sharan

Corrado

Passat Variant

Passat

Golf 3 Variant

Golf 3

Vento

Checked & suitable by EPYTEC

Passendes Zubehör zusammen kaufen und sparen