Gesucht nach BMW | Z3 Roadster | 1.8i | E36
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
- ✓ seat damping for the driver and passenger seat on the BMW E36 Z3 with electronic seat adjustment
- ✓ for front axle: BMW E36
- ✓ brake caliper: BMW Performance 6 piston, reference left 34116786741 + right 34116786742
- ✓ brake disc: BMW E46 M3 Z3 CSL (VA) 345x28mm
- ✓ for BMW E30, E36, or Z3
- ✓ engine: M30 / M5 (S38) from BMW E32 and E34 (3,0 and 3,5l from 5er and 7er)
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
- ✓ 1x clutch release lever / fork for BMW series 3 E46 E90
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ eccentric for article 590 galvanized
- ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 7m
- ✓ bottom length: 20mm
- ✓ top length: 23mm
- ✓ width: 18mm
Hexagonal nut M08
Thread right
Galvanized
- ✓ eccentric for article 244, galvanized
- ✓ 2x drive shaft adapters for VW Golf MK1
- ✓ drift spacer / steering lock spacer in oder to increase steering angle on models BMW E30 E36 E46 Z1 Z3
- ✓ spacing plate / bush / bushing for brake caliper adapter
- ✓ hexagon nut: M10
- ✓ thread: right
- ✓ material: stainless steel
- ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line
Hexagonal coupling nut M8x30
Thread right
Galvanized
- ✓ high-quality wheel / lug nuts with cone collar 60° M14x1.5 with the best rust protection
- ✓ 1x straight fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ Width: 24mm
- ✓ Height: 47mm
Hexagonal coupling nut M8x30
Thread right
Galvanized
Hexagon nut self-locking M12
Ring non metallic (plastic)
Thread right
Galvanized
Zinc-plated press-in nut M06 with right hand thread
Hexagon thin nut M08
Thread left
Galvanized
- ✓ 1x inner joint with 108mm diameter and matching gaiter, including fixation material
- ✓ EBC brake disc 334x32 Manufacturer number: GD1153 with bolt circle 4x100 and 5x100 suitable for our brake caliper adapters Article 266
- ✓ Golf 4 R32
- ✓ Zimmermann brake disc 370x32 Manufacturer's ref. 100.3367.70 with bolt circle 5x100 and 5x112 suitable for our brake caliper adapter article 742
- ✓ Audi TT
- ✓ Seat Leon
- ✓ Zimmermann brake disc 330x32 Manufacturer's code: 400.3673.52 with drilled hub bore to 68mm, suitable for our brake caliper adapter article 868
- ✓ Mercedes Benz E Class W210, S210, SLK CLK, Chrysler Crossfire
- ✓ complete brake system for rear axle: all four-wheel drive Golf 4 Bora Vento Audi A3 series
- ✓ Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422
- ✓ original brake calipers with carrier for handbrake from Golf 4 R32
- ✓ Brake disc 310x22 rear from VW Phaeton Manufacturer No.: 3D0 615 601 D
- ✓ for front axle: BMW E36
- ✓ brake caliper: Porsche 996 series, Porsche original reference 996.351.425/426
- ✓ brake disc: Mercedes Benz 330x28mm W203, reference A2034211312
- ✓ for vehicles with bolt circle / pitch circle: 5x120 and wheel hub centering: 72.5
- ✓ on brake discs with bolt circle / pitch circle: 5x120
- ✓ brake disc centering: 79mm
- ✓ widening/enlarging per wheel: 6mm
- ✓ high-quality wheel / lug nuts with cone collar 60° M14x1.5 with the best rust protection
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ high-quality wheel / lug nuts with cone collar 60° M12x1.5 with the best rust protection
Cylinder head screw with hexagon socket
Size: M14x65
Thread gradient: 1.5
Material: steel high-strength quality 12.9
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
Hexagonal socket head cap screw high resistance entirely thread
Type: M10x35
Thread 1.25
Blank
Quality 12.9
- ✓ spare bolts for cardan shaft flange
- ✓ 2-part steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
Hexagonal socket head cap screw high resistance with partial thread
Type: M06x20
Blank
Quality 8.8
- ✓ brake discs pitch circle diameter / bolt circle / drilling hub bore hole custome-made
- ✓ additional 2nd hole circle / pitch circle drilled in the brake disc
- ✓ turn hub diameter up