Drive Shaft VW Golf MK1 Scirocco Jetta Caddy G60 VR6 Conversion Front Wheel Drive 02M 02Q DQ250 6-speed
- ✓ narrow axle
- ✓ VW Golf 1, Golf 1 Cabrio, Scirocco, Caddy 14 D, Jetta 1
- ✓ DQ250 / DSG all-wheel drive transmission, 02M, 02Q 6-speed transmission
€544.88*
- TÜV registration free
- 15 years expert knowledge
- shipping within 24h
- 2 years warranty
Drive shaft set for all VW Golf 1, Scirocco Jetta 1&2 Caddy 14D with the narrow axle. Absolutely necessary if you want to convert your vehicle to VR6, 16V or 1.8T engine in conjunction with the 02M 02Q DQ250 / DSG 6-speed transmission and stay on front wheel drive.
If you are converting to all-wheel drive we have the matching driveshafts in our assortment here article ISP122-Golf4 ( click here ).
The drive shafts fit only in conjunction with the DQ250 / DSG all-wheel drive transmission, which were installed on the 4-cylinder engines, such as in the VW Golf 6R.
The DQ250 transmissions, which are used with the 6-cylinder engines, have a star-shaped flange and a tripod joint and are therefore unfortunately not suitable with our drive shafts.
We have matching engine and transmission mounts as well as adapters to convert the 02m 6-speed to front wheel drive. Just look at us in the store or below in the accessories.
Suitable for the following vehicles:
- VW Golf 1
- VW Scirocco
- Caddy 14D
- VW Jetta 1
- VW Golf 1 Convertible
Suitable for the following transmission:
- DQ250 / DSG all-wheel drive transmission
- 02M
- 02Q
If you are converting to all-wheel drive, we have the right drive shafts in our range (click here).
We also have matching engine and gearbox mounting bracket, as well as matching adapter in order to convert to the 02M 6-speed gearbox, also convert to front-wheel drive. Visit our shop under accessories.
It is important that when installing the new drive shaft, no excess pressure is created in the sleeve. In our installation instructions you can see how to prevent this (click here).
Advantages of the shafts:
- stable up to 800 hp
- fits plug and play
- solid shaft made of special high strength material
- simple assembly
- our drive shafts are registration-free and therefore do not have to be registered
Scope of delivery:
- 1x drive shaft set (2 shafts) for VW Golf 1, Scirocco Jetta 1&2 Caddy 14D stable up to 800 hp.
Our drive shafts are registration-free and therefore do not need to be registered.
If you are converting to all-wheel drive, we have the right drive shafts in our range (click here).
Technical data:
Login
2 April 2021 18:32
PATRICE Z
Excellente qualité.
16 September 2021 20:27
Mario L
Product looks good, I believe that it will fit to my TSI swap. Only thing I need to note that there should be a product number engraved or a sticker with product number on the driveshafts. It would be a lot easier for some people to declare them as a modification in the papers.
24 October 2021 10:08
Javier G
Great product, fits perfectly as indicated. Solid to hold a lot of power. I recommend it without a doubt
2 May 2024 21:25
Lukas R
skvěle pasuje pro mou konverzi vw caddy mk1 1.9 tdi ahf ve spojení s převodovkou 6q 02M.V očekávaném výkonu 300PS zatím nevyzkoueno,ale věřím,e budou fungovat dobře jako vechny výrobky od epytec.má oblíbená firma kam se rád vracím.
9 August 2019 12:27
Hakeem L
I chose this because it suited the conversion I was doing. I liked the fact the kit came complete with everything fitted. I would recommend this product to all my car buddies doing a similar conversion. Sell with clamp and screws to attach to gearbox. I have used quite a few of your products. They fit well and work very good. I trust the quality of your products every time. I am a very happy man with a big smile.
5 September 2020 23:13
Stephane F
Bon produit , bonne qualité et conforme à la description
16 September 2021 20:26
Mario L
Product looks good, I believe that it will fit to my TSI swap. Only thing I need to note that there should be a product number engraved or a sticker with product number on the driveshafts. It would be a lot easier for some people to declare them as a modification in the papers.
8 October 2021 09:36
Javier G
Producto de gran calidad, macizos y no tubulares. En un principio pensé que el precio era algo caro, pero viendo el precio del repuesto original, sale mucho más a cuenta adquirir este producto hecho a medida, que andar haciendo inventos. Lo recomiendo sin duda
- What exactly is the point of having a shorter driveshaft?
As a result of lowering, the axle geometry changes and the shaft presses against the wheel bearing, exposing it to high levels of wear and, in the worst case, destroying it. It is therefore imperative to depressurize the component. This is done by shortening the trees.
- Do reinforced driveshafts also have reinforced ball joints ?
The wheel-side ball joints are also reinforced, but the inner ball joints are like the standard ball joints.
- Why are two bags of grease included in the delivery?
The grease is included in the scope of delivery so that it can be regreased or if the gearbox flange is open at the rear. In this case, grease must still be applied there. If the shaft is supplied completely closed, no grease is required, as this has already been done.
- Why are no shims (OE: 1K0407357D) for the mounting supplied as they are original?
We do not supply the shims, as we install the latest version of the bellows. With these, the shims are no longer required.