Camber Track Correction Plates Camber Track Adjustment VW Golf MK 2 MK3 Syncro Rear Axle
- ✓ 3.0-3.0 degrees negative/positive rear camber correction
- ✓ Golf 2 3 Syncro
- ✓ camber and track
£11.23*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
You do not want to spend money on tires that are worn out only on one side, but you want more grip and a better performance?.
Then we have the product for you! With this product, you can adjust the camber according to your needs.
Conversion kit to convert the VW Golf MK2 MK3 Syncro rear axle. Adjustement of track and camber.
With our conversion kit, you can modify the camber and the track, rear axle, from -3 to +3 degree. This is ideal for rear lowering and to correct defects, if a tire is worn out only on one side of your vehicle.
It is also advisable on racing and slalom circuits. Or simply to take turns at high speed.
Functional description:
For this conversion kit, it is necessary to make welds on the axle. The provided plates are drilled with an oblong hole. They must be welded to the axle at the point of the suspension arm. Thanks to the oblong holes and eccentric screws, the suspension arm can be adjusted as desired, whilst remaining in the original mounting position.
info: eccentric bolts and nuts are available in our shop.
Delivery:
- 1x plate
- material certificate
A montage description under this link:click here
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Login
1 September 2017 12:05
enrico3112
👍👍schneller Versand, weiter so
24 January 2019 14:36
arnold_judas_rimmer_bsc
Great seller. No issues 👍
8 May 2019 01:35
demarc.6o6yd
Schneller Versand, Super Ware, Super verpackt! Gerne wieder
9 November 2017 11:18
arnold_judas_rimmer_bsc
Very pleased. Thanks!
- Does the ABS still function after installing the camber correction?
Yes, basically the ABS will continue to function after installing a camber correction. The important thing is: If you significantly change the camber, the geometry between the ABS sensor and the ABS ring (impulse ring) can shift in such a way that the sensor no longer operates optimally "at the correct angle" or parallel to the ring.
Why can there be problems?
The ABS sensor reads the ABS ring with a defined distance and alignment angle. With a significant camber change (often from about 1°, depending on the vehicle and axle design), it can happen that:
the sensor no longer lines up correctly, or
the air gap between the sensor and the ring is no longer within the target range.
Then the ABS can basically continue to work, but there can be, for example, ABS/ESP warning messages, sporadic interventions, or error memory entries.
What needs to be done then?
If something like this occurs, a small adjustment is usually sufficient:
Slightly correct the position of the ABS sensor (e.g., slightly reposition/align it on the mount)
Check seating and attachment (sensor must be flat and securely seated)
Check the air gap (not rubbing, not too large)
Then it is best to read/clear the error memory and take a short test drive.
Practical Tip
After the conversion, it is recommended to have an axle alignment. If you are using camber values in the range > 1°, it is advisable to check the ABS sensor area directly so that no surprises arise later.
- Do I need longer screws or can the old ones remain.
With Epytec camber correction plates, you can continue to use the original screws up to +-2°. For camber correction plates over 2°, we recommend slightly sanding a washer and placing it under the screw head so that it continues to sit flush on the camber correction plate. Of course, if the camber correction plate is thicker, new screws may be needed directly.
- Can camber correction plates be installed on drum brakes?
Yes, this is possible provided that a stub axle is installed on the rear axle. In this case, our Epytec camber correction plates can also be easily mounted on drum brakes. The functionality and installation are largely the same as for vehicles with disc brakes.
It is important that the mounting points of the stub axle match the execution of the camber correction plates.
| Motor | Motorcode |
|---|---|
| 1.8 Syncro | 19E|98PS(72KW) |
| 1.8i Cat Syncro | 19E|90PS(66KW) |
| 1.8 Syncro | 19E|90PS(66KW) |
| 1.8i Cat Syncro | 1G1|90PS(66KW) |
| 1.8 Syncro | 1G1|90PS(66KW) |
| 1.8 Syncro | 1G1|98PS(72KW) |
| Motor | Motorcode |
|---|---|
| 1.8 Syncro | 1H1|90PS(66KW) |
| 2.9 VR6 Syncro | 1H1|190PS(140KW) |
| 1.9 TDI Syncro | 1H1|90PS(66KW) |
| 2.0 Syncro | 1H1|115PS(85KW) |
| Motor | Motorcode |
|---|---|
| 2.0 Syncro | 3A2|115PS(85KW) |
| 1.8 G60 Syncro | 3A2|160PS(118KW) |
| 1.8 G60 Syncro | 35I|160PS(118KW) |
| 2.0 Syncro | 35I|115PS(85KW) |
| Motor | Motorcode |
|---|---|
| 1.8 Syncro | 1G2|98PS(72KW) |
| 1.8 Syncro | 165|98PS(72KW) |
| 1.8 Syncro | 19E|98PS(72KW) |
| 1.8 Syncro | 19E|90PS(66KW) |
| 1.8 Syncro | 1G2|90PS(66KW) |
| 1.8 Syncro | 165|90PS(66KW) |
| Motor | Motorcode |
|---|---|
| 1.8 Syncro | 19E|98PS(72KW) |
| 1.8i Cat Syncro | 19E|90PS(66KW) |
| 1.8 Syncro | 19E|90PS(66KW) |
| 1.8i Cat Syncro | 1G1|90PS(66KW) |
| 1.8 Syncro | 1G1|90PS(66KW) |
| 1.8 Syncro | 1G1|98PS(72KW) |
| Motor | Motorcode |
|---|---|
| 1.8 Syncro | 1H1|90PS(66KW) |
| 2.9 VR6 Syncro | 1H1|190PS(140KW) |
| 1.9 TDI Syncro | 1H1|90PS(66KW) |
| 2.0 Syncro | 1H1|115PS(85KW) |
| Motor | Motorcode |
|---|---|
| 2.0 Syncro | 3A2|115PS(85KW) |
| 1.8 G60 Syncro | 3A2|160PS(118KW) |
| 1.8 G60 Syncro | 35I|160PS(118KW) |
| 2.0 Syncro | 35I|115PS(85KW) |
| Motor | Motorcode |
|---|---|
| 1.8 Syncro | 1G2|98PS(72KW) |
| 1.8 Syncro | 165|98PS(72KW) |
| 1.8 Syncro | 19E|98PS(72KW) |
| 1.8 Syncro | 19E|90PS(66KW) |
| 1.8 Syncro | 1G2|90PS(66KW) |
| 1.8 Syncro | 165|90PS(66KW) |
- ✓ For Golf 2 Corrado
- ✓ On Golf 4 Accelerator Pedal
- ✓ OE:6Q1723503K
- ✓ Hydraulic clutch slave cylinder
- ✓ Golf 1, 2, 3, Audi A3, Seat Leon
- ✓ Conversion to 6-speed 02M,/02Q or 5-speed 02A,/02J transmission
- ✓ Length: 57cm
- ✓ M10x1 curved on the outside
- ✓ M10x1 straight on the inside
- ✓ gearbox holder
- ✓ Golf 2, Golf 3, Passat, Corrado, Jetta, Vento
- ✓ 02m / R32 V6 1.8T 6-speed gearbox DRP DQB DXW
- ✓ G60 GTI 16V engines
- ✓ 228 clutch
- ✓ lightens 4.1 kg
- ✓ Complete KIT
- ✓ length 1.34m
- ✓ OE NR: C357721335E
- ✓ Hydraulic clutch complete conversion kit
- ✓ Golf 2, 3, Corrado, Jetta, Passat 35i
- ✓ Engine conversion from the Golf 4, original pedals are retained
- ✓ Passat 35I Golf 2 GTI G60
- ✓ OE NR: 357 721 401
- ✓ Golf1 Caddy conversion
- ✓ 4x100 to 5x112
- ✓ 20mm per side
- ✓ 57.1 -> 57.1 centering
- ✓ Release lever reinforced
- ✓ G60, VR6, 2L 16V, GTI, TDI, Corrado, Golf 2/ 3, Passat
- ✓ 02A/02J gearbox
- ✓ VW Golf 2, Golf 3 Passat, Corrado, Jetta, Vento
- ✓ 02a 02j 5 gear
- ✓ 1.8T 16V G60 conversion
- ✓ 312x25 1J0615301AA 1J0615302A S3 / R32 brake disc
- ✓ 1-piston 1J0615123E / 1J0615124E S3 / R32 brake caliper
- ✓ front axle
- ✓ 334x32 1J0615301AA 1J0615302 A Golf 4 brake disc
- ✓ 6-piston 7L6615123T / 7L6615124T Porsche Cayenne/ VW Tuareg brake caliper
- ✓ front axle
- ✓ 02M transmission conversion to FWD
- ✓ simple conversion
- ✓ Golf 1, Golf 2, 3, Golf 4 series
- ✓ 020 Gearbox
- ✓ 4&5Gang
- ✓ OE:VAG WZ 3104
- ✓ Hydraulic line
- ✓ Golf 1, 2, 3, Corrado, Vento, Scirocco, Caddy
- ✓ Conversion to 6-speed 02M,/02Q or 5-speed 02A,/02J transmission
- ✓ Hydraulic clutch slave cylinder
- ✓ Golf 4, Audi A3, Seat Leon, Skoda Oktavia
- ✓ 1J0721261D
- ✓ Suitable for our master brake cylinders
- ✓ plug and play
- ✓ quickly installed
- ✓ VW Golf 2, Golf 3 Passat, Corrado, Jetta, Vento
- ✓ Golf 3 16V, 1.8T transverse installation, Golf 4TDI
- ✓ 4 motions