Installation instructions for article 661 VW Golf 2 3 camber adjustment screws Syncro rear axle Camber and toe adjustment
Here you can find out how to proceed step by step to mount camber correction plates on the rear axle of the VW Golf 2 3 Syncro. With our camber plates, you never have the problem of tires that are worn on one side anymore and you can also bring even more grip and power to the road. You also have the opportunity to have a higher cornering speed and an even better look by driving a negative camber.
Here you can see how the whole thing has to be assembled. First, an elongated hole must be attached to the original mounts. To do this, it is best to hold the plate and mark the elongated hole. Then the slotted plates are welded on to the outside with the webs.
The webs are used to ensure that the screw heads with the exactly fitting washers have a clean guide. Thus, even when the axle is mounted, the camber or the toe can be set exactly at any time.
Of course, this type of assembly also works with many other vehicles that have this type of axle suspension and can be transferred as desired.
- ✓ -3.0 degrees to +3 degrees camber
- ✓ 8mm thickness
- ✓ suitable for Golf 2 3 Syncro