Bremssatteladapter BMW E36 316i 328i Compact Umbau BMW E46 Bremsanlage Hinterachse Tuning Adapter
- ✓ 320x22 34201166073 BMW E46 brake disc
- ✓ 1-piston 34216750161 / 34216750162 BMW E46 brake caliper
- ✓ rear axle
€171.89*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Bremssatteladapter für die Hinterachse des BMW E36 Compact zur Montage der BMW E46 Bremsanlage mit Bremsscheiben 320x20 mm in Verbindung mit dem BMW E46 Bremssattel.
Adapter sind passend für folgende Fahrzeuge:
- BMW 3er Compact 316g
- BMW 3er Compact 316i
- BMW 3er Compact 316i
- BMW 3er Compact 318Ti
- BMW 3er Compact 318Ti
- BMW 3er Compact 323Ti
Vorteile dieser Bremsanlage:
- Top Verzögerungswerte, kein Vergleich zur den herkömmlichen Bremsscheiben hinten
- deutlich verbessertes Fading durch innenbelüftete Scheiben
- ein Muss bei Leistungssteigerung
- durch das im Lieferumfang enthaltene Materialzertifikat kann eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werden.
Benötigte Komponenten:
- Bremsscheiben hinten BMW E46 mit 320x22mm Teile Nr: 34201166073
- Bremssättel vom BMW E46 Teile Nr: 34216750161 / 34216750162
Lieferumfang:
- 2x Bremssattel Adapter für die Hinterachse vom BMW E36 Compact
- hochfestes Schraubenmaterial
- Materialzertifikat
Tips, information and advice:
- To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
- For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
- We cannot give you a generalised answer as to which rim size you can ride after your brake conversion. There are simply too many different wheel rims. For this reason, we have developed a template with which you can easily check whether the brake system kit fits under your rim. We have included a link to the template in the description. If your rim does not fit, you can simply use wheel spacers. >> Go directly to customised wheel spacers <<
- Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, which you can use to assemble and then install them according to your requirements. Click here for the steel flex configurator >> Configure steel flex brake line <<
- The handbrake cable must always be used from the installed calliper, which means that the new handbrake cable may have to be adjusted slightly. For conversions in which the original calliper is still used and the original handbrake cable can be used, you may have to route it more directly to compensate for the larger disc diameter and longer travel
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ Significantly higher boiling point
- ✓ Better pedal feel
- ✓ Suitable for the race track
- ✓ 345x28 150342270 BMW E46 M3 CSL brake discs
- ✓ 4-piston 996351425 / 996351426 Porsche Boxter S brake caliper
- ✓ front axle
- ✓ 345x28 34112282445 BMW E46 M3 CSL brake disc
- ✓ 6-piston 34116786741 / 34116786742 BMW 135i brake caliper
- ✓ front axle
- ✓ Racing brake fluid
- ✓ Reduction in brake fading
- ✓ improved pedal feel
- ✓ optimized paste for brake systems
- ✓ correct viscosity
- ✓ no squeaking
- ✓ Desired dimensions
- ✓ Quickly configurable
- ✓ Length, color and connections freely selectable
- ✓ to configure yourself
- ✓ with TÜV certificate
- ✓ best quality
- ✓ 320x22
- ✓ 75mm centering
- ✓ 60mm height
- ✓ 320x22
- ✓ 75mm centering
- ✓ 60mm height
- ✓ Registration-free
- ✓ Greenstuff sports surface
- ✓ temperature up to 650°C
- ✓ Registration-free
- ✓ Blackstuff Ultimax brake pads
- ✓ temperature up to 400°C
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ Registration-free
- ✓ Redstuff ceramic covering
- ✓ temperature up to 750°C