Brake systems KIT rear axle VW Golf 2 3 VR6 Syncro Porsche Cayenne
- ✓ 310x22 3D0615601D VW Phaeton brake disc
- ✓ 4-piston 955352421 / 955352422 Porsche Cayenne brake caliper
- ✓ rear axle
€1,584.37*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
With our high-performance brake system kit for all four-wheel drive Golf 2 3 VR6 Syncro and many other cars, you can convert your rear axle to a 4-piston brake system in conjunction with the VW Golf 4 R32 handbrake caliper and achieve ideal performance.
With this high performance brake system kit you can drive the Porsche Cayenne 4-piston Brembo brake calipers and the VW Golf 4 R32 handbrake caliper in combination with the 310x22 mm brake discs from VW Phaeton on all four-wheel drive Golf 2 3 VR6 Syncro and many other cars.
Another advantage of our brake system kit is that it is equipped with the same original brake calipers and brake discs that are also installed in series-production cars. These OE parts not only make the replacement of the brakes simple and uncomplicated, but also facilitate the registration with the TÜV.
The brake system kit is not only sporty, but also suitable for everyday use and, thanks to the perforated sports brake discs in conjunction with our ceramic lining, enables ideal performance while reducing brake dust, temperature and abraison.
With this high-performance brake kit you can get started straight away and have everything you need to convert your rear axle to a 4-piston brake system.
The high-performance brake system kit is suitable for the following models with all-wheel drive
- VW Golf 2 Syncro
- VW Golf 3 Syncro
Advantages of this brake system:
- our components, such as brake callipers and brake discs, come from series-production cars and are OE parts. This makes replacing the brakes simple and uncomplicated and facilitates registration with the TÜV.
- The material certificate included in the scope of delivery enables registration by individual acceptance even for series-production cars.
- High-performance brake pads with longer service life than the original pads
- extreme deceleration values also in combination with our rear axle brake system
- directly fitting to the above mentioned models and therefore easily rebuildable to original condition at any time
- our EPYTEC brake caliper adapters require no sending in of your stock parts, no re-welding, re-milling or re-drilling.
Note:
- the kit includes new brake calipers with Epytec logo as standard. For an additional charge, we can also supply the brake calipers in the colour of your choice and without the logo, in which case the delivery time is about 2-3 weeks longer.
Get our high performance brake kit now and experience ideal performance and durability.
The Porsche calipers are connected to the car's hydraulics and can therefore develop enormous braking power. However, as these do not have handbrake functions, the rear Audi S3 or Golf 4 R32 is also used as a handbrake caliper adapter. The hydraulic connection is closed with a blind plug. This means that it only serves as a handbrake caliper.
Scope of delivery:
- 2x Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422 (left / right)Brembo 20.7673.03/20.7673.04(left / right) including complete new brake calliper bracket kit
- 2x handbrake caliper Golf 4 R32
- matching set of matching set of VW Phaeton brake discs 310x22 mm part number: 3D0 615 601 D
- ceramic brake pads for less brake dust and longer lifetime
- 4x brake caliper adapter for All four-wheel drive Golf 4 Bora Vento Audi A3 series
- 2x center rings
- 4x matching steel braided lines
- high-strength bolt material
- Material certificate
- Stress analysis / FEM calculation for registration
- Installation instructions (click here)
Tips, information and advice:
- To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
- For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
- We cannot give you a general answer as to which rim size you can ride after your brake conversion. There are simply too many different rims. In rare cases, it can happen that the rims have minimal contact with the brake caliper, in which case you can simply use wheel spacers. >> Go directly to customised wheel spacers <<
- The handbrake cable must always be used from the installed calliper, which means that the new handbrake cable may have to be adjusted slightly. For conversions in which the original calliper is still used and the original handbrake cable can be used, you may have to route it more directly to compensate for the larger disc diameter and longer travel
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
- ✓ rim assembly
- ✓ M14x1.5 on the wheel hub
- ✓ precise centering
- ✓ 310x22
- ✓ 68mm centering
- ✓ 42mm height
- ✓ 310x22
- ✓ 68mm centering
- ✓ 42mm height
- ✓ 35% better braking performance
- ✓ 75% more service life
- ✓ low dust generation
- ✓ Desired color can be selected
- ✓ Golf 4 R32 1-piston brake calipers
- ✓ 8N0615423C / 8N0615424C / 1J0615425
- ✓ Length: 20cm
- ✓ M10x1 curved on the outside
- ✓ M10x1 straight on the inside
- ✓ 35% better braking performance
- ✓ 75% more service life
- ✓ low dust generation
- ✓ Choice of color
- ✓ ZR18 / Z18 4-piston brake calipers
- ✓ 955.352.421 / 955352421 955.352.422 / 955352422 7L6615423H / 7L6615423L / 7L6615423D / 7L6615423G
- ✓ 310x22 3D0615601D VW Phaeton brake disc
- ✓ 4-piston 955352421 / 955352422 Porsche Cayenne brake caliper
- ✓ rear axle
- ✓ sealing plugs
- ✓ brake caliper
- ✓ M10x1 brake line connector
- ✓ 310x22
- ✓ 68mm centering
- ✓ 42mm height
- ✓ rear axle
- ✓ Golf 2 Syncro Golf 3 Syncro 4 motion
- ✓ External joints VR6 or G60
- ✓ rear axle
- ✓ Golf 2 Syncro Golf 3 Syncro 4 motion
- ✓ External joints VR6 or G60 coarse teeth
- ✓ rear axle
- ✓ Golf 2 Syncro Golf 3 Syncro 4 motion
- ✓ External joints G60 or VR6 fine toothing
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ Registration-free
- ✓ Greenstuff sports surface
- ✓ temperature up to 650°C
- ✓ OE:1H0201653C
- ✓ Made of stainless steel
- ✓ Golf 3 Syncro, Golf 3 Variant Syncro
- ✓ Significantly higher boiling point
- ✓ Better pedal feel
- ✓ Suitable for the race track
- ✓ 310x22
- ✓ 68mm centering
- ✓ 42mm height
- ✓ 310x22
- ✓ 68mm centering
- ✓ 42mm height
- ✓ Registration-free
- ✓ Blackstuff Ultimax brake pads
- ✓ temperature up to 400°C
- ✓ Registration-free
- ✓ Greenstuff sports surface
- ✓ temperature up to 650°C
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ Registration-free
- ✓ Redstuff ceramic covering
- ✓ temperature up to 750°C
- ✓ Brake disc bolt circle drilling special design
- ✓ Drill an additional 2nd bolt circle in the brake disc
- ✓ Turn up hub diameter
- ✓ Brake force regulator Infinitely variable
- ✓ Perfectly adjustable braking effect
- ✓ suitable for all vehicles
- ✓ Racing brake fluid
- ✓ Reduction in brake fading
- ✓ improved pedal feel
- ✓ optimized paste for brake systems
- ✓ correct viscosity
- ✓ no squeaking
- ✓ Choice of color
- ✓ ZR18 / Z18 4-piston brake calipers
- ✓ 955.352.421 / 955352421 955.352.422 / 955352422 7L6615423H / 7L6615423L / 7L6615423D / 7L6615423G
