Brake Caliper Adapter BMW E30 to E36 M3 Brake Disc 315x28 Brake E38 Brake Caliper
- ✓ 315x28 34112227171 BMW E36 M3 brake disc
- ✓ 4-piston 34111163757 / 34111163758 BMW E38 brake caliper
- ✓ front axle
€214.12*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter, front axle, for BMW E30 with BMW E36 E46 wheel hub, for conversion to 315x28 E36 M3 brake discs, combined with the brake calipers and brake caliper mounting brackets from BMW E38.
Required components::
- brake caliper and brake caliper mounting bracket: BMW E38 , reference: left 34111163757, right 34111163758
- brake disc: BMW E36 M3 315x28mm , reference 34112227171, 34112227737
- conversion kit to 5-hole wheel hub (item n° 126 in our shop;)
Advantages of this brake system:
- high deceleration
- thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles
- directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems
- Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling
Delivery:
- 2x brake caliper adapters (see picture)
- 2x spacers under discs
- high-strength mounting screws
- material certificate
Rims: at least 17 inch
Tips, information and hints:
- For a better ventilation of the brake system, we recommend removing the dust cover plates and brake anchor plates.
- We can generally not answer, which rim size you can mount after your brake conversion. There are simply too many different rims.
- In rare cases it is possible that the rims touch minimal the brake caliper, then you can simply use spacers.
>> Now directly to spacers << - Install the adapter with the necessary components and then check if new brake lines are required. Because, depending on the vehicle, the lines may be too short or the line tips may not suitable. We advise you to change to steel braided brake line because of the quality and technical advantage. Specifically for this, we have developed an online brake line configurator, where you can assemble the type of steel braided brake lines you want. Click here to go to the configurator
>> Configure steel braided brake lines <<
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
24 October 2019 21:53
Sebastian S
Perfekt
11 October 2023 11:48
Arne M
Geilste Passgenauigkeit. Alles wie man sichs wünscht 👌
7 October 2020 09:09
Dominik L
Passt sehr gut Das ein Foto von den Teilen in der Verpackung gamacht wird und an den Kunden geschickt kannte ich noch nicht finde aber das eine super idee ist Eine sache könnte man aber verbessern und zwar das mann eine schraube für die Zentrierung der bremsscheiben mitliefert da die Originale von der länge nicht passt
8 June 2021 07:34
Christoph H
Bin sehr zufrieden mit den Adaptern und den Hülsen. Gute Verarbeitung und für alles ein Zertifikat einfach super. Service und Lieferzeit sind auch hervorragend. Werde bestimmt noch einiges für meinen Umbau von Epytec verwenden.
11 October 2023 11:48
Arne M
Geilste Passgenauigkeit. Alles wie man sichs wünscht 👌
18 November 2018 08:01
Helmut S
Alles top gerne wieder
11 February 2021 18:46
Yusuf H
Adapter passen perfekt auf die Bremssättel leider konnte mehr nicht getestet werden da die Federbeine vorne noch nicht fertig sind aber würde mal behaupten das die auch so passgenau funktioniert
13 May 2021 22:12
Jochen K
Super Passgenau und einfach zu montieren.
12 March 2020 09:27
Eser C
Bremsadapter passt nicht richtig ich musste noch 1.6 mm Unterlagscheibe verwenden . Außerdem wurden die Adapter falsch gekennzeichnet. Linke Seite ist Rechts und umgekehrt , ich bin mal gespannt ,was der tüv Prüfer sagt ,wenn Links gekennzeichnetes Teil Rechts eingebaut ist .
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ BMW E36, E46, Z3, BMW E30
- ✓ 6.4mm thickness, 7.4mm thickness
- ✓ Steering gear
- ✓ 0.5 degrees positive/negative
- ✓ 6mm thickness
- ✓ Suitable for BMW E30 E24 E28 E34 M3 S14
- ✓ 315x28
- ✓ 79mm centering
- ✓ 52mm height
- ✓ Desired dimensions
- ✓ Quickly configurable
- ✓ Length, color and connections freely selectable
- ✓ Conversion bolt circle 5x120
- ✓ wheel hub E36 / E46
- ✓ front axle
- ✓ Two-piece design
- ✓ different thicknesses
- ✓ many diameters
- ✓ Significantly higher boiling point
- ✓ Better pedal feel
- ✓ Suitable for the race track
- ✓ Hole circle: 5x120
- ✓ Thickness: 12mm
- ✓ Centering 72.5->79.0
- ✓ Racing brake fluid
- ✓ Reduction in brake fading
- ✓ improved pedal feel
- ✓ optimized paste for brake systems
- ✓ correct viscosity
- ✓ no squeaking
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ Registration-free
- ✓ Redstuff ceramic covering
- ✓ temperature up to 750°C
- ✓ Registration-free
- ✓ Blackstuff Ultimax brake pads
- ✓ temperature up to 400°C
- ✓ 315x28
- ✓ 79mm centering
- ✓ 53mm height
- ✓ 315x28
- ✓ 79mm centering
- ✓ 53mm height
- ✓ 315x28
- ✓ 79mm centering
- ✓ 53mm height