BMW E36 M3 Performance Brake Caliper Adapter Front Brake System 345x28
- ✓ 345x28 34112282445 BMW E46 M3 CSL brake disc
- ✓ 6-piston 34116786741 / 34116786742 BMW Performance brake caliper
- ✓ front axle
€172.12*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapters for the front axle of BMW E36 M3 to install the 6 piston BMW Performance brake calipers, combined with the 345x28mm E46 M3 brake discs.
Thanks to our adapter, the 6 piston BMW Performance brake calipers are simply screwed to the original axle instead of the original caliper.
Advantages of this brake system:
- top deceleration, without comparison with conventional brake discs
- easy assembly
- better performance
- supplied material certificate
- can easily be restored to the original state
Required components:
- brake caliper: BMW Performance 6 piston from 135i , reference: left 34116786741 ; right 3411678674
- Brake pads from the BMW 135i Part No. 34 11 6 786 044
- bracke disc: BMW E46 M3 CSL front axle 345x28mm
Delivery:
- 2x brake caliper adapters for BMW E36 M3
- high strength mounting screws
- material certificate
Tips, information and hints:
- For a better ventilation of the brake system, we recommend removing the dust cover plates and brake anchor plates.
- We can generally not answer, which rim size you can mount after your brake conversion. There are simply too many different rims.
- In rare cases it is possible that the rims touch minimal the brake caliper, then you can simply use spacers.
>> Now directly to spacers << - Install the adapter with the necessary components and then check if new brake lines are required. Because, depending on the vehicle, the lines may be too short or the line tips may not suitable. We advise you to change to steel braided brake line because of the quality and technical advantage. Specifically for this, we have developed an online brake line configurator, where you can assemble the type of steel braided brake lines you want. Click here to go to the configurator
>> Configure steel braided brake lines <<
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
28 October 2019 17:55
Klaas K
Gute Produkte, Schnelle Lieferung und professionelle Beratung! Komme gerne immer wieder auf das Epytec Team zurück. Weil die Adapter und Bolzen immer 100% passen. Nichts zu makeln (Vielleicht nur noch schwarz eloxieren?). Empfehle immer meine BMW Freunden Epytec für Ihre Projekten. Epytec zeigt immer positive Interesse an Ihre Kunden und Zufriedenheit (y) Sehr Kundenorientiert!!
4 May 2023 16:43
Jens P
Sehr schnell, Preis Leistung in Ordnung, gute Qualität
25 June 2018 11:41
Klaas K
Weil es toll ist mit Euch zusammen zu arbeiten! Genauigkeit des Produktes All meine Bekannten der ähnliche Umbauten vorhaben NL in Amsterdam eröffnen... ;) Tolle Service/Unterstützung der Mannschaft Neuh, wieso? Noch nicht zur Sache
30 March 2019 13:06
Schug M
Perfekt Passgenauigkeit. Alles Bestens :)
13 September 2020 12:51
Sachverständigenbüro Christoph B
Passt Plug&Play. Eintragung mit teilegutachten soll ja danach recht problemlos funktionieren.
13 September 2020 22:31
Sachverständigenbüro Christoph B
Passt Plug&Play. Eintragung mit teilegutachten soll ja danach recht problemlos funktionieren.
23 December 2018 13:35
Jesper G
👍🏻👍🏻👍🏻
16 March 2019 06:13
Schug M
Perfekte Passgenauigkeit. Artikel kann ich nur weiter empfehlen,
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ optimized paste for brake systems
- ✓ correct viscosity
- ✓ no squeaking
- ✓ Desired dimensions
- ✓ Quickly configurable
- ✓ Length, color and connections freely selectable
- ✓ 345x28
- ✓ 79mm centering
- ✓ 52mm height
- ✓ Racing brake fluid
- ✓ Reduction in brake fading
- ✓ improved pedal feel
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ Registration-free
- ✓ Blackstuff Ultimax brake pads
- ✓ temperature up to 400°C
- ✓ Registration-free
- ✓ Redstuff ceramic covering
- ✓ temperature up to 750°C
- ✓ 52107137499
- ✓ Long durability
- ✓ BMW E36 Z3
- ✓ Significantly higher boiling point
- ✓ Better pedal feel
- ✓ Suitable for the race track