Skip to main content
You can find out everything about your order via your -> View customer account
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT

Big Brake systems KIT VW Golf 7 8 Seat Leon Audi A3 Cupra Leon Skoda Brake caliper adapter 360x36 Brake disc Mercedes Porsche Panamera 82mm Brake caliper - Farbe Bremssattel: Rot mit Epytec Logo

  • ✓ 360x36 A0004211712 / A2184210212 Mercedes CLS 500 brake disc
  • ✓ 6-piston 7PP615149J / 7PP615150J Porsche Cayenne 958 brake caliper
  • ✓ front axle

With our big  brake kitkit for the Golf 7, 7, Audi A3 8V and many other cars, you can convert your front axle to a 6-piston brake system and achieve ideal performance. 

With this high performance brake kit you can use the Porsche  Panamera 6-piston Brembo calipers in combination with the 360x36 mm brake discs from Mercedes ML/GL-KLASSE to Golf 7, Golf 7 and Audi A3 series.

Another advantage of our brake system kit is that it is equipped with the same original brake calipers and brake discs that are installed in series-production cars. These OE parts not only make the replacement of the brakes simple and uncomplicated, but also facilitate the registration with the TÜV.

The big brake kit is not only sporty, but also suitable for everyday use and, thanks to the perforated sports brake discs in conjunction with our ceramic lining, enables ideal performance while reducing brake dust, temperature and wear.

With this high-performance big brake kit, you can get started straight away and have everything you need to convert your front axle to a 6-piston brake system.

The high performance big brake kit is suitable for the following cars with aluminium axle stub:

  • Audi A3 Sportback 8YA
  • Cupra Leon KL1
  • Seat Ateca KH7
  • Seat Leon KL1
  • Seat Leon 5F1
  • Skoda Octavia III 
  • Skoda Octavia IV NX3
  • Skoda Octavia IV Combi NX5
  • VW Golf VII 5G1
  • VW Golf VIII CD1
  • VW Passat 3G2
  • VW Tiguan AD1
  • VW Touran 5T1

Advantages of this big brake kit:

  • our components, such as brake callipers and brake discs, come from series-production cars and are OE parts. This makes replacing the brakes simple and uncomplicated and facilitates registration with the TÜV.
  • The material certificate included in the scope of delivery enables registration by individual acceptance even for series-production cars.
  • High-performance brake pads with longer service life than the original pads
  • extreme deceleration values also in combination with our rear axle brake system
  • directly fitting to the above mentioned models and therefore easily rebuildable to original condition at any time
  • our EPYTEC brake caliper adapters require no sending in of your stock parts, no re-welding, re-milling or re-drilling.

Note:

Please note that these brake calipers come in red with Epytec logo.

Get our high performance brake kit now and experience ideal performance and durability.


Suitable for all listed cars with  aluminium steering knuckle (not suitable for cars with an steel steering knuckle).

Scope of delivery:

  • 2x Porsche Cayenne 958 GTS Panamera brake calipers part number:  7PP615149J / 7PP615150J  (left/right) including complete new brake caliper bracket kit in red with Epytec logo
  • matching set of Brembo Sport brake discs T 350x36mm
  • 2x ceramic brake pads for less brake dust and longer lifetime
  • 2x brake caliper adapter  for  Golf 7, 8, Audi A3 Cupra Leon Seat Leon Skoda and others
  • 2x matching steel braided lines
  • Assembly aid for brake disc assembly
  • high strength bolt material
  • Material certificate
  • Stress analysis / FEM calculation for registration
  • Template to check whether the brake system fits under your rim
  • installation instructions

The original 18-inch rims can be used

Tips, information and advice:

  • To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
  • For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
  • We cannot give you a generalised answer as to which rim size you can ride after your brake conversion. There are simply too many different wheel rims. For this reason, we have developed a template with which you can easily check whether the brake system kit fits under your rim. We have included a link to the template in the description. If your rim does not fit, you can simply use wheel spacers. >> Go directly to customised wheel spacers <<

Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.

Technical data:

Bremssatteltyp: Panamera 82mm Schaft
Einbauort: vorne
Farbe Bremssattel: Rot mit Epytec Logo
Bremssatteltyp: Panamera 82mm Schaft
Einbauort: vorne
Farbe Bremssattel: Rot mit Epytec Logo

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.