With our big brake kit for the Passat B8, VW Arteon, Skoda Supherb series and many other cars, you can convert your rear axle to a 4-piston brake system in conjunction with the VW Golf 5R/ 6R handbrake caliper and achieve ideal performance.
With this high performance brake kit / Big Brake Kit you can drive the Porsche Cayenne 4-piston Brembo brake callipers and the VW Golf 7R handbrake caliper in conjunction with the 356x22 mm brake discs from the Audi A6 A7 on the Passat B8, VW Arteon, Skoda Supherb series and many other vehicles.
Another advantage of our brake system kit is that it is equipped with the same original brake calipers and brake discs that are also installed in series-production cars. These OE parts not only make the replacement of the brakes simple and uncomplicated, but also facilitate the registration with the TÜV.
This set includes a parts certificate for simple registration in accordance with §19.3 StVZO, so that trouble-free approval by TÜV, DEKRA, KÜS or GTÜ is possible.
The big brake kit is not only sporty, but also suitable for everyday use and, thanks to the perforated sports brake discs in conjunction with our ceramic lining, enables ideal performance while reducing brake dust, temperature and abraison.
With this high-performance big brake kit you can get started straight away and have everything you need to convert your rear axle to a 4-piston brake system.
The big high-performance brake system kit/Big Brake Kit is suitable for the following VW and Seat models with aluminium axle OE: 3Q0 505 436M / 3Q0 505 435M
- VW Passat B8 Limousine
- VW Passat B8 Variant
- VW Passat B8 Alltrack
- VW Arteon
- VW Arteon Shooting Brake
- Skoda Supherb III Schrägheck
- Skoda Supherb III Kombi
Advantages of this big brake kit:
- Simple TÜV registration with parts certificate
- our components, such as brake callipers and brake discs, come from series-production cars and are OE parts. This makes replacing the brakes simple and uncomplicated and facilitates registration with the TÜV.
- The material certificate included in the scope of delivery enables registration by individual acceptance even for series-production cars.
- High-performance brake pads with longer service life than the original pads
- extreme deceleration values also in combination with our rear axle brake system
- directly fitting to the above mentioned models and therefore easily rebuildable to original condition at any time
- our EPYTEC brake caliper adapters require no sending in of your stock parts, no re-welding, re-milling or re-drilling.
Save money on registration:
- A normal individual TÜV approval for brake systems often costs more than €600. Thanks to our TÜV-approved parts certificates, you usually only pay around €90 for the registration of the brake system*!
Note:
Please note that these brake callipers are supplied in the colour of your choice, according to your specifications.
Get our high performance brake kit now and experience ideal performance and durability.
Suitable for all listed cars with a alloy steering knuckle (not suitable for cars with an steel steering knuckle).
VW Golf 7R handbrake caliper is not included in delivery. If not already fitted originally, this must still be obtained:
- original brake callipers with carrier for handbrake from Golf 7R part number:
- Part number brake caliper: 5Q0615424 / 5Q0615424
- Part number brake calliper carrier: 5Q0615425 / 8V0615425B
Scope of delivery:
- 2x Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422 (left / right)Brembo 20.7673.03/20.7673.04(left / right) including complete new brake calliper bracket kit in the colour of your choice
- matching set of Rotinger Sport brake discs Audi A6 A7 part no.: 4H0 615 601 F
- ceramic brake pads for less brake dust and longer lifetime
- 2x brake caliper adapter for Passat B8, VW Arteon, Skoda Supherb series
- 2x matching steel braided lines
- Assembly aid for brake disc assembly
- high-strength bolt material
- Material certificate
- incl. parts certificate for registration with TÜV, DEKRA, KÜS or GTÜ
- Stress analysis / FEM calculation for registration
- Installation instructions (click here)
*The indicated price of €90 refers only to the registration of the braking system. Additional charges may apply for additional registrations, such as wheel and tyre combinations.
FAQ: Häufige Fragen
Sollte ich die Anker- bzw. Staubbleche entfernen?
Wir empfehlen das Entfernen der Bleche, da sie die Belüftung einschränken. Ohne diese Barriere wird die Bremse effizienter gekühlt und bleibt auch bei starker Beanspruchung leistungsfähig.
Wie erleichtere ich mir die Felgenmontage?
Mit Radmontagehilfen gelingt das Ausrichten und Aufsetzen der Felge einfacher und präziser. Das schützt Gewinde und Felge und spart Zeit.
Radmontagehilfe ansehen
Benötige ich Spurverbreiterungen nach dem Umbau?
Welche Felgengröße passt, lässt sich pauschal nicht sagen. Streift die Felge minimal am Bremssattel, schaffen Spurverbreiterungen den nötigen Abstand.
Spurverbreiterungen ansehen
Brauche ich neue Bremsleitungen?
Für optimale Passform und stabile Bremswirkung empfehlen wir Stahlflex. Diese sind konfigurierbar und liefern konstantere Ergebnisse als Gummileitungen.
Stahlflex konfigurieren
Warum unsere Adapter die beste Wahl sind
Wusstest du, dass sich dein EPYTEC-Adapter oft schon nach dem ersten Verschleißteilwechsel komplett bezahlt macht?
Das liegt daran, dass du mit unseren Adaptern auf OE-Bremsscheiben und -Sättel setzt, die wir bewusst bei der Entwicklung der Adapter ausgewählt haben. Diese Komponenten sind nicht nur in höchster Qualität gefertigt und in Serienfahrzeugen im Einsatz, sondern durch ihre Großserienproduktion auch günstig und jederzeit verfügbar.
Für dich bedeutet das: erstklassige Bremsleistung ohne Abhängigkeit von teuren Speziallösungen anderer Hersteller.
Und selbst beim TÜV hast du es leichter, denn unsere OE-Komponenten sind bereits offiziell abgenommen – der Prüfer kann sich direkt darauf beziehen, sodass deine Eintragung unkompliziert und sicher abläuft.
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.