Audi RS6 RS5 RS4 A4 B5 B4 R8 Brembo 8-piston Brake Caliper Adapter A4 B5
- ✓ 360x32 8D0615302B 8E0615301AB Audi RS4 brake disc
- ✓ 8-piston 8E0615107 / 8E0615108 Audi R8 brake caliper
- ✓ front axle
€207.90*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter, front axle, for Audi RS4 RS5 B5 to convert to die 8-piston brake calipers from RS4 B7 RS6, combined with the original Audi A4 RS4 B5 brake discs (360x32 ).
Suitable for the following vehicles:
- AUDI A4 Avant (8D5, B5)
- RS4 RS5 B5 Quattro Kombi
Advantages of this brake system:
- high deceleration, also in conjunction with our rear axle braking system
- thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles
- directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems
- Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling
Required components:
- brake caliper: Audi R8 8-piston / Brembo caliper reference left 8E0615107 , right 8E0615108
- brake disc: Audi RS4 B5 360x32 mm , reference 8D0615302B /or RS4 B7 disc 365x34mm reference 8E0615301AB
- (when the 365x24mm disc is installed, it is necessary to place washers on the brake caliper mount so that the brake disc size is compensated)
Delivery:
- 2x brake caliper adapters (see picture)
- 4x matching washers for 365mm
- Stress analysis / FEM calculation for entry
- material certificate
- high strength mounting screws
Tips, information and advice:
- To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
- For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
- We cannot give you a generalised answer as to which rim size you can ride after your brake conversion. There are simply too many different wheel rims. For this reason, we have developed a template with which you can easily check whether the brake system kit fits under your rim. We have included a link to the template in the description. If your rim does not fit, you can simply use wheel spacers. >> Go directly to customised wheel spacers <<
- Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, which you can use to assemble and then install them according to your requirements. Click here for the steel flex configurator >> Configure steel flex brake line <<
- The handbrake cable must always be used from the installed calliper, which means that the new handbrake cable may have to be adjusted slightly. For conversions in which the original calliper is still used and the original handbrake cable can be used, you may have to route it more directly to compensate for the larger disc diameter and longer travel
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
2 June 2018 09:22
Enrico S
Zu aller erst möchte ich mich für die super schnelle Lieferung bedanken und die kompetente Beratung am Telefon Die halter sind hochwertig und optisch perfekt Ich kann es nur jedem weiter empfehlen der keine Adapter für seine sättel hat einfach top Das Ergebnis ist mega
22 May 2022 17:11
Kurevija D
Sehr guter Support und exzellente beratung. Teile sind hervorragender Qualität.
25 June 2018 06:58
Oliver N
5sterne für die große Auswahl an Adaptern, Beratung ,Passgenauigkeit,Preis leistung und wer später bremst fährt länger schnell 👍🏼
7 May 2023 08:52
Norman W
Top Qualität Passt wie angegossen. Ich bin begeistert. An meinem 2ten Projekt kommt nur Epytec in Frage
27 March 2019 19:01
Manuel A
FARBGEBUNG schwarz wäre noch ganz gut. Habe diesen Adapter gewählt weil es die Originahalter nicht mehr käuflich gibt irgendwo. Eingebaut habe ich noch nicht. Sind jetzt erst lackiert worden.
13 March 2024 14:24
Bert K
Sieht professionell gefertigt aus und stabil. Ich hab das Teil aus dem Bauch heraus gekauft in der Hoffnung, daß es für meine Anwendung PP paßt. Mit nerckleinen Änderung bekommtvEpytec das bestimmt hin.
15 January 2020 07:33
Danny H
Super Qualität! Passt perfekt! Epytec beste Wahl für Adapter!
5 December 2019 12:40
Frederic D
trés bon produit rien a dire
9 April 2021 10:21
Christian C
Super good work
5 December 2019 22:10
Frederic D
Très bon matériel et finition parfait 👌
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ Racing brake fluid
- ✓ Reduction in brake fading
- ✓ improved pedal feel
- ✓ Registration-free
- ✓ Blackstuff Ultimax brake pads
- ✓ temperature up to 400°C
- ✓ Registration-free
- ✓ Redstuff ceramic covering
- ✓ temperature up to 750°C
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ optimized paste for brake systems
- ✓ correct viscosity
- ✓ no squeaking
- ✓ 330x22 4F0615601B Audi A6 brake disc
- ✓ 4-piston 955352421 / 955352422 Porsche Cayenne brake caliper
- ✓ rear axle
- ✓ 360x32
- ✓ 68mm centering
- ✓ 47mm height
- ✓ 360x32
- ✓ 68mm centering
- ✓ 47mm height
- ✓ 356x22 4G0615601 RS6 brake disc
- ✓ 1-piston 4B3615424 Audi S4 B6 brake caliper
- ✓ rear axle
- ✓ Desired dimensions
- ✓ Quickly configurable
- ✓ Length, color and connections freely selectable
- ✓ 5mm spacer bushing / spacer plate for brake systems for 4-6 piston brake calipers
- ✓ 5x112 bolt circle
- ✓ Plug & Play
- ✓ Audi A4
- ✓ excellent fit
- ✓ rear axle Audi RS4 / RS2 / A4
- ✓ high stability
- ✓ 365x34
- ✓ 68mm centering
- ✓ 46.5mm height
- ✓ Audi engines
- ✓ 240 clutch
- ✓ lightens 8.6 kg
- ✓ Significantly higher boiling point
- ✓ Better pedal feel
- ✓ Suitable for the race track
- ✓ Racing brake fluid
- ✓ Reduction in brake fading
- ✓ improved pedal feel
- ✓ Registration-free
- ✓ Blackstuff Ultimax brake pads
- ✓ temperature up to 400°C
- ✓ Registration-free
- ✓ Redstuff ceramic covering
- ✓ temperature up to 750°C
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ optimized paste for brake systems
- ✓ correct viscosity
- ✓ no squeaking
- ✓ 330x22 4F0615601B Audi A6 brake disc
- ✓ 4-piston 955352421 / 955352422 Porsche Cayenne brake caliper
- ✓ rear axle
- ✓ 360x32
- ✓ 68mm centering
- ✓ 47mm height
- ✓ 360x32
- ✓ 68mm centering
- ✓ 47mm height
- ✓ 356x22 4G0615601 RS6 brake disc
- ✓ 1-piston 4B3615424 Audi S4 B6 brake caliper
- ✓ rear axle
- ✓ Desired dimensions
- ✓ Quickly configurable
- ✓ Length, color and connections freely selectable
- ✓ 5mm spacer bushing / spacer plate for brake systems for 4-6 piston brake calipers
- ✓ 5x112 bolt circle
- ✓ Plug & Play
- ✓ Audi A4
- ✓ excellent fit
- ✓ rear axle Audi RS4 / RS2 / A4
- ✓ high stability
- ✓ 365x34
- ✓ 68mm centering
- ✓ 46.5mm height
- ✓ Audi engines
- ✓ 240 clutch
- ✓ lightens 8.6 kg
- ✓ Significantly higher boiling point
- ✓ Better pedal feel
- ✓ Suitable for the race track