VW Golf MK1 Caddy Scirocco Brake Caliper Adapter Porsche Boxter 986 280x22 15 inch Wheel
- ✓ 280x22 535615301 VW Golf 2 / 3 G60 brake disc
- ✓ 4-piston 986351421 / 986351422 986 Porsche Boxter brake caliper
- ✓ front axle
€181.97*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter, front axle, to install the 280mm G60 brake discs, combined with the 4-pistons Porsche Boxter 986er brake caliper.
Specially developed to be able to continue using 15-inch rims!
Suitable for the following vehicles:
- Golf MK1
- Golf MK1 Cabrio
- Caddy 14d
- Jetta 1
- Scirocco
Advantages of this brake system:
- high deceleration, also in conjunction with our rear axle braking system
- specially developed to be able to continue using 15-inch rims.
- brake discs with 4x100 PCD, Therefore, the original Dolf MK1 PCD can be maintained
- thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles.
- directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems
- Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling.
We recommend the brake pads of the Porsche rear calipers, reference 996.352.421. These fit perfectly into the calipers and are perfect for the 280er brake discs! This allows the pads to fit perfectly to the 280 disc without any modification!
Required components:
- brake caliper: 986er Porsche Boxter, reference 986.351.421 / 422
- brake disc: VW Golf MK2/MK3 G60, 280x22, reference 6KL 615 301 (only 100% fitting to the specified Porsche calipers)
- brake pads: from the rear calipers, 996.352.421 (these are smaller and look like the G60 brake pad surface)
Delivery:
- 2x brake caliper adapters for VW Golf 1MK Caddy Scirocco , conversion to Porsche brake system
- 4x screws (10.9)
- 1x material certificate
The corresponding rear axle adapters for the conversion to 280er internally vented brake discs in combination with S3 brake calipers can be found in our shop.
Tips, information and advice:
- To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
- For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
- We cannot give you a generalised answer as to which rim size you can ride after your brake conversion. There are simply too many different wheel rims. For this reason, we have developed a template with which you can easily check whether the brake system kit fits under your rim. We have included a link to the template in the description. If your rim does not fit, you can simply use wheel spacers. >> Go directly to customised wheel spacers <<
- Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, which you can use to assemble and then install them according to your requirements. Click here for the steel flex configurator >> Configure steel flex brake line <<
- The handbrake cable must always be used from the installed calliper, which means that the new handbrake cable may have to be adjusted slightly. For conversions in which the original calliper is still used and the original handbrake cable can be used, you may have to route it more directly to compensate for the larger disc diameter and longer travel
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
10 July 2021 13:19
golfgti222
Alles bestens, gern wieder!
15 August 2019 07:03
Luciano Filippo B
Top qualität, wie immer passgenau..kann nur weiter empfehlen. Gruß Marilia
13 November 2021 20:40
Dag Ragnar K
Almost a perfect fit for my 288x25 discs with porsche boxster 986 calipers
6 February 2020 15:05
Bernhard W
Perfekte Passgenauigkeit Schnelle Lieferung
6 July 2023 19:55
Luciano Filippo B
Passgenauigkeit ist absolut top, sowie verarbeitung. Sehr empfehlenswert.
7 January 2018 21:41
sofoklis64
Top alles bestens wie Gewont
6 September 2017 15:03
vwxcruiserx85
Alles bestens, gerne wieder :-)
21 October 2020 20:18
Luciano Filippo B
Absolut top Qualität, sehr gute Verarbeitung. Gerne wieder. 😊👍👍
8 December 2018 08:20
tobitobsen1991
Reibungsloser Ablauf sehr schneller Versand gerne wieder
13 December 2021 09:29
Luciano Filippo B
Super Bearbeitung und Passgenauigkeit. Gerne wieder und kann nur weiter empfehlen. Filippo
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ 280x22
- ✓ 65mm centering
- ✓ 40mm height
- ✓ Length: 57cm
- ✓ M10x1 curved on the outside
- ✓ M10x1 straight on the inside
- ✓ Front axle right
- ✓ Golf 4,Audi A3,Audi TT, Audi S3
- ✓ Free registration
- ✓ 280x22
- ✓ 65mm centering
- ✓ 40mm height
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ Racing brake fluid
- ✓ Reduction in brake fading
- ✓ improved pedal feel
- ✓ 280x22
- ✓ 65mm centering
- ✓ 40mm height
- ✓ optimized paste for brake systems
- ✓ correct viscosity
- ✓ no squeaking
- ✓ Registration-free
- ✓ Redstuff ceramic covering
- ✓ temperature up to 750°C
- ✓ Front axle left
- ✓ VW Golf 4 1.8T Audi S3, Seat Leon
- ✓ Free registration
- ✓ Significantly higher boiling point
- ✓ Better pedal feel
- ✓ Suitable for the race track
- ✓ 280x22
- ✓ 65mm centering
- ✓ 39.5mm height
