VW Golf 5 6 Jetta 3 Audi A3 Seat Leon Skoda brake caliper adapter R8 TT brake system ceramic brake disc tuning adapter
- ✓ 356x22 4S0615602A Audi R8/S8 brake disc
- ✓ 1-piston 22827403 Audi R8 brake caliper
- ✓ rear axle
€368.91*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter for aluminium rear axle on all 4WD Golf MK5, MK6, Audi A3, etc, for conversion to R8 brake system.
The conversion is combined with the 356x22 mm brake discs from Audi R8/S8, rear.
The calipers are connected to the hydraulics of the vehicle and can thus develop an enormous braking force.
Adapters are suitable for the following VW and Audi models with aluminum axle OE: 1k0505433/ 1k0505434:
- Audi A1 (8X)
- Audi A3 (8P)
- VW Golf V (1K)
- VW Golf VI (5K)
- VW Golf Variante V (1K)
- VW Golf Variante VI (5K)
- Seat Altéa (5P)
- Skoda Octavia (1Z)
- Skoda Octavia (5E)
- Skoda Superb (3T)
Advantages of this brake system:
- top deceleration, without comparison with conventional brake discs
- better performance
- supplied material certificate
Required components:
- brake caliper: Audi R8
- floating brake caliper rear axle from Audi R8
- brake disc: 356x22 from Audi R8/S8
Delivery:
- 2x brake caliper adapters for Audi R8 caliper
- 2x brake caliper adapers for R8 hand brake caliper
- high strength mounting screws
- material certificate
Tips, information and hints:
- For a better ventilation of the brake system, we recommend removing the dust cover plates and brake anchor plates.
- We can not answer generally, which rim size you can mount after your brake conversion. There are simply too many different rims.
- In rare cases it is possible that the rims touch minimal the brake caliper, then you can simply use spacers.
>> Now directly to spacers << - Install the adapter with the necessary components and then check if new brake lines are required. Because, depending on the vehicle, the lines may be too short or the line tips may not suitable. We advise you to change to steel braided brake line because of the quality and technical advantage. Specifically for this, we have developed an online brake line configurator, where you can assemble the type of steel braided brake lines you want.
Click here to go to the >> configure steel braided brake lines << - Always use the hand brake cable of the installed brake caliper. So sometimes you have to modify / adapt the new handbrake cable. For conversions, where the original caliper is used and the handbrake cable can be used, you may need to pull the cable without any other fittings (ie directly) to compensate for the long distance due to the large diameter of the large brake discs.
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
6 August 2019 21:09
Alexander M
Egal was ich bisher bei euch gekauft habe, ich war immer zufrieden und hätte nie bedenken wegen Qualität oder Passgenauigkeit! Einfach top und nur weiter zu empfehlen!
2 May 2018 20:09
JAVIER L
Das Produkt ist sehr gut entwickelt, um seine Funktion zu erfüllen, es tut weh, dass es sich in meinem Auto nicht gut angepasst hat und es zurückgegeben werden musste. Ich bin glücklich mit dem Epytec Team für ihre gute Kommunikation. Ein herzlicher Gruß. Verkäufer sehr empfehlenswert!
15 January 2020 00:09
Federico C
Prodotto molto buono!
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: