Wheel hubs 5x100 VW Golf 2 3 Variant Cabriolet Golf 4 Cabriolet Passat Variant Vento Seat Cordoba Ibizia 2 Bolt ircle Adapter Change in Front with ABS Ring Tuning
- ✓ 5x100 bolt circle
- ✓ Plug & Play
- ✓ VW Golf 2 / Corrado / Seat Cordoba
€150.42*
- 30 days money back guarantee
- shipping within 24h
- 15 years expert knowledge
- 2 years warranty
Wheel hubs for conversion to 5x100 bolt circle / PCD for the front axle with ABS ring.
Suitable for
- Golf MK2
- Golf MK3 Variant
- Golf MK4 Cabriolet
- Vento,
- Caddy 2 van
- Corrado
- Seat Cordoba
- Ibizia 2
- Toledo 1
Who wants to finally convert to den 5x100mm bolt circle / pitch circle diameter, is here just right!
Vorteile:
- the VR6 brake system can be mounted
- rims with 5x100 without spacer plates
- including ABS ring
- 100% fitting
- completely galvanized, therefore best corrosion protection
- the 5x100mm hubs are equipped with M14x1,5 thread. Thus, the original wheel bolts for the VW and Audi rims can be used
- is not authorized under the STVO (German Road Licensing Law) However, it is possible to register your purchase even for series vehicles
Delivery:
- 2x wheel hubs with 5 x 100 PCD and M14x1,5 thread for VW Golf MK2 MK3 Variant Cabriolet Golf MK4 Cabriolet Passat Variant Vento Seat Cordoba Ibizia II
- material certificate
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Login
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- ✓ 50-70% Shorter shifting
- ✓ For shift linkage
- ✓ stainless steel
- ✓ -3.0 degrees to +3 degrees camber
- ✓ 8mm thickness
- ✓ suitable for Golf 2 3 Syncro
- ✓ 310x22 240122-02121 A8 brake disc
- ✓ original brake caliper
- ✓ rear axle
- ✓ excellent fit
- ✓ front axle Golf 2 3 Corrado
- ✓ high stability
- ✓ 305x22 6KL615301 Seat Ibiza Cupra R brake disc
- ✓ 4-piston original Seat Ibiza Cupra R brake caliper
- ✓ front axle
- ✓ closure / sealing / lock plate for conversion engine from 2,0l 16V VW to G60
- ✓ gearbox holder
- ✓ Golf 2, Golf 3, Passat, Corrado, Jetta, Vento
- ✓ 02m / R32 V6 1.8T 6-speed gearbox DRP DQB DXW
- ✓ 191498625A Golf 2 Golf 3 Caddy
- ✓ OE quality
- ✓ front axle
- ✓ 312x25 8N0615301A Audi S3 / Golf 4 GTI brake disc
- ✓ 4-piston 996352422 / 996352421 Porsche 996 brake caliper
- ✓ front axle
- ✓ 171407625A Golf 1 Scirocco
- ✓ OE quality
- ✓ front axle