.png?ts=1749194267)
.png?ts=1749194267)
VW Golf 5 6 Plus Audi A3 Jetta Seat Leon Altea Brake calliper adapter 360x32 disc Audi RS4 B5 Brembo 8-piston brake calliper Audi RS5 brake system
- ✓ 360x32 8D0615302B Audi RS4 B5 brake disc
- ✓ 8-piston 8E0615107 / 8E0615108 RS4 Audi RS4 RS5 brake caliper
- ✓ front axle
£179.48*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter for the front axle of the VW Golf 5, 6, Touran, Audi A3 8P, Seat Leon and many more to the Audi RS4 RS5 8-piston Brembo brake calipers in conjunction with the Audi RS4 B5 360x32 mm brake discs.
The adapters fit the following vehicles with steel axle stubs:
- Audi A3 8P1
- Audi A3 Sportback 8PA
- Audi TT 8J3
- Seat Altea 5P1
- Seat Leon 5F1
- VW Caddy III Großraumlimosine 2CB
- VW Caddy III Kasten 2CA
- VW Golf Plus 521
- VW Golf V 1K1
- VW Golf V Variant 1K5
- VW Golf VI 5K1 517
- VW Golf VI Cabriolet 517
- VW Golf VI Variant AJ5
- VW Jetta IV 162
- VW Scirocco 137
- VW Touran 1T3
- VW Touran 5T1
Suitable for all vehicles listed that have a steel steering knuckle (not suitable for vehicles with an aluminium steering knuckle)
It may be necessary to install steering lock limiters for complete steering lock, these can be found below in the appropriate accessories.
Advantages of this brake system:
- Extreme deceleration values also in conjunction with our rear axle brake system
- the material certificate included in the scope of delivery can also be used to enable registration by individual approval for series vehicles.
- Fits directly to the above-mentioned models and can therefore be easily retrofitted to the original condition at any time
- our EPYTEC brake calliper adapters do not require your standard parts to be sent in, no rewelding, re-milling or re-drilling.
Required components:
- Audi RS4 RS5 8-piston original Brembo brake calipers Brake caliper left part no.: 8E0615107 Brake caliper right part no.: 8E0615108
- Brake disc: Audi RS4 B5 360x32 mm part no. 8D0615302B or RS4 B7 brake disc 365x34mm part no. 8E0615301AB
- (if the 365 disc is fitted, a shim must be fitted to the brake calliper mount to compensate for the brake disc size. )
Scope of delivery:
- 2x brake caliper adapter VW Golf 5 6 Audi A3 series
- Material certificate
- High-strength screw material
Tips, information and advice:
- To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
- For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
- We cannot give you a generalised answer as to which rim size you can ride after your brake conversion. There are simply too many different wheel rims. For this reason, we have developed a template with which you can easily check whether the brake system kit fits under your rim. We have included a link to the template in the description. If your rim does not fit, you can simply use wheel spacers. >> Go directly to customised wheel spacers <<
- Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, which you can use to assemble and then install them according to your requirements. Click here for the steel flex configurator >> Configure steel flex brake line <<
- The handbrake cable must always be used from the installed calliper, which means that the new handbrake cable may have to be adjusted slightly. For conversions in which the original calliper is still used and the original handbrake cable can be used, you may have to route it more directly to compensate for the larger disc diameter and longer travel
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
22 February 2024 16:14
oberpfalz-anderl
+++++ TOP Service+++++ 1A +++++ Alles TOP +++++ Vielen Dank +++++
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ 310x22 1K0615601N Golf 5 R brake disc
- ✓ 4-piston 955352421 / 955352422 Porsche Cayenne brake caliper
- ✓ rear axle
- ✓ 356x22 4G8615601 Audi RS7 brake disc
- ✓ 4-piston 955352421 / 955352422 Porsche Cayenne brake caliper
- ✓ rear axle
- ✓ 310x22 1K0615601N Golf 5 R brake disc
- ✓ 4-piston 955352421 / 955352422 Porsche Cayenne brake caliper
- ✓ rear axle
- ✓ Desired dimensions
- ✓ Quickly configurable
- ✓ Length, color and connections freely selectable
- ✓ 330x22
- ✓ 68mm centering
- ✓ 49mm height
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ 360x32
- ✓ 68mm centering
- ✓ 47mm height
- ✓ Racing brake fluid
- ✓ Reduction in brake fading
- ✓ improved pedal feel
- ✓ Registration-free
- ✓ Redstuff ceramic covering
- ✓ temperature up to 750°C
- ✓ 365x34
- ✓ 68mm centering
- ✓ 46.5mm height
- ✓ optimized paste for brake systems
- ✓ correct viscosity
- ✓ no squeaking
- ✓ 330x22
- ✓ 68mm centering
- ✓ 49mm height
- ✓ 360x32
- ✓ 68mm centering
- ✓ 47mm height
- ✓ Significantly higher boiling point
- ✓ Better pedal feel
- ✓ Suitable for the race track