VW Golf 4 VW Polo 6r WRC Bora 1.8T Polo Audi A3 adapter Porsche brake caliper rear axle
- ✓ 310x22 3D0615601D VW Phaeton brake disc
- ✓ 4-piston 996352421 / 996352422 Audi S3 8L VW Golf R32 brake caliper
- ✓ rear axle
£439.78*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter to convert the rear axle from all 4WD Golf MK4 Bora Vento Audi A3, etc. to Porsche umzubauen.
The conversion is combined with the 310x22 mm brake discs from VW Phaeton rear.
The Porsche calipers are connected to the hydraulics of the vehicle and can thus develop an enormous braking force. Since these have no handbrake functions, the rear Audi S3 or Golf 4 R32 is also used as a hand brake caliper adapter. The hydraulic connection is thereby closed with a blind plug / closure cap, thus this serves only as a hand brake caliper.
With the plates, the track widens by 15mm per side.
Suitable for the following VW and Seat models (4WD):
- Audi A3 8L
- Audi TT 8N
- Seat Leon
- Seat Toledo 1M2
- Skoda Octavia 1U
- VW Golf MK4
- VW Bora/Jetta MK4
- Polo 6R WRC
Advantages of this brake system:
- top deceleration, without comparison with conventional brake discs
- better performance
- supplied material certificate
Required components:
- brake caliper: Porsche reference 996.352.421 + 996.352.422
- rear axle, brake caliper with support / bracket from Audi S3 8L or VW Golf R32
- brake disc: 310x22 rear from VW Phaeton (must be re-drilled to 5x100, can also be done by us.)
Delivery:
- 2x brake caliper adapters for Porsche caliper
- 2x brake caliper adaper for R32 / S3 hand brake caliper
- 2x spacers / track plates under brake discs
- 4x steel braided brake lines
- high strength mounting screws
- material certificate
- stress analysis
Tips, information and advice:
- To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
- For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
- We cannot give you a generalised answer as to which rim size you can ride after your brake conversion. There are simply too many different wheel rims. For this reason, we have developed a template with which you can easily check whether the brake system kit fits under your rim. We have included a link to the template in the description. If your rim does not fit, you can simply use wheel spacers. >> Go directly to customised wheel spacers <<
- Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, which you can use to assemble and then install them according to your requirements. Click here for the steel flex configurator >> Configure steel flex brake line <<
- The handbrake cable must always be used from the installed calliper, which means that the new handbrake cable may have to be adjusted slightly. For conversions in which the original calliper is still used and the original handbrake cable can be used, you may have to route it more directly to compensate for the larger disc diameter and longer travel
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
12 January 2021 22:37
daflow2010
Schneller Versand, freundlicher Service und super Qualität. Danke nochmal.
7 August 2018 00:11
rodrigue8099
Livraison rapide,vendeur sérieux ðð
24 July 2017 20:11
polotuner40
Die Alles Super. Gerne wieder.
2 February 2021 10:21
karleinzs3
Livraison retardé à cause de la poste (covid-19)sinon vendeur au top
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
| Motor | Motorcode |
|---|---|
| 1.8 T quattro | 8N9|190PS(140KW) |
| 3.2 VR6 quattro | 8N9|250PS(184KW) |
| 1.8 T quattro | 8N9|180PS(132KW) |
| 1.8 T quattro | 8N9|224PS(165KW) |
| Motor | Motorcode |
|---|---|
| 1.9 TDI quattro | 8L1|130PS(96KW) |
| S3 quattro | 8L1|224PS(165KW) |
| 1.8 T quattro | 8L1|180PS(132KW) |
| S3 quattro | 8L1|210PS(154KW) |
| 1.8 T quattro | 8L1|150PS(110KW) |
| Motor | Motorcode |
|---|---|
| 1.8 T quattro | 8N3|245PS(180KW) |
| 1.8 T quattro | 8N3|224PS(165KW) |
| 1.8 T quattro | 8N3|180PS(132KW) |
| 3.2 VR6 quattro | 8N3|250PS(184KW) |
| 1.8 T quattro | 8N3|190PS(140KW) |
| Motor | Motorcode |
|---|---|
| RSI 3.2 4motion | 9C1|224PS(165KW) |
| RSI 3.2 4motion | 1C1|224PS(165KW) |
| Motor | Motorcode |
|---|---|
| 1.9 TDI 4motion | 1J1|90PS(66KW) |
| 1.9 TDI 4motion | 1J1|130PS(96KW) |
| 1.9 TDI 4motion | 1J1|115PS(85KW) |
| 2.8 V6 4motion | 1J1|204PS(150KW) |
| 1.9 TDI 4motion | 1J1|101PS(74KW) |
| 1.8 4motion | 1J1|125PS(92KW) |
| 3.2 R32 4motion | 1J1|241PS(177KW) |
| 2.3 V5 4motion | 1J1|150PS(110KW) |
| 1.9 TDI 4motion | 1J1|150PS(110KW) |
| 2.0 4motion | 1J1|115PS(85KW) |
| 2.3 V5 4motion | 1J1|170PS(125KW) |
| 2.8 VR6 4motion | 1J1|204PS(150KW) |
| Motor | Motorcode |
|---|---|
| 1.9 TDi Syncro | 1M1|150PS(110KW) |
| 1.8 T Cupra R | 1M1|225PS(165KW) |
| 2.8 Cupra 4 | 1M1|204PS(150KW) |
| 1.8 T Cupra R | 1M1|209PS(154KW) |
| Motor | Motorcode |
|---|---|
| 1.8 T 4x4 | 1U2|150PS(110KW) |
| Motor | Motorcode |
|---|---|
| 1.8 T quattro | 8N9|190PS(140KW) |
| 3.2 VR6 quattro | 8N9|250PS(184KW) |
| 1.8 T quattro | 8N9|180PS(132KW) |
| 1.8 T quattro | 8N9|224PS(165KW) |
| Motor | Motorcode |
|---|---|
| 1.9 TDI quattro | 8L1|130PS(96KW) |
| S3 quattro | 8L1|224PS(165KW) |
| 1.8 T quattro | 8L1|180PS(132KW) |
| S3 quattro | 8L1|210PS(154KW) |
| 1.8 T quattro | 8L1|150PS(110KW) |
| Motor | Motorcode |
|---|---|
| 1.8 T quattro | 8N3|245PS(180KW) |
| 1.8 T quattro | 8N3|224PS(165KW) |
| 1.8 T quattro | 8N3|180PS(132KW) |
| 3.2 VR6 quattro | 8N3|250PS(184KW) |
| 1.8 T quattro | 8N3|190PS(140KW) |
| Motor | Motorcode |
|---|---|
| RSI 3.2 4motion | 9C1|224PS(165KW) |
| RSI 3.2 4motion | 1C1|224PS(165KW) |
| Motor | Motorcode |
|---|---|
| 1.9 TDI 4motion | 1J1|90PS(66KW) |
| 1.9 TDI 4motion | 1J1|130PS(96KW) |
| 1.9 TDI 4motion | 1J1|115PS(85KW) |
| 2.8 V6 4motion | 1J1|204PS(150KW) |
| 1.9 TDI 4motion | 1J1|101PS(74KW) |
| 1.8 4motion | 1J1|125PS(92KW) |
| 3.2 R32 4motion | 1J1|241PS(177KW) |
| 2.3 V5 4motion | 1J1|150PS(110KW) |
| 1.9 TDI 4motion | 1J1|150PS(110KW) |
| 2.0 4motion | 1J1|115PS(85KW) |
| 2.3 V5 4motion | 1J1|170PS(125KW) |
| 2.8 VR6 4motion | 1J1|204PS(150KW) |
| Motor | Motorcode |
|---|---|
| 1.9 TDi Syncro | 1M1|150PS(110KW) |
| 1.8 T Cupra R | 1M1|225PS(165KW) |
| 2.8 Cupra 4 | 1M1|204PS(150KW) |
| 1.8 T Cupra R | 1M1|209PS(154KW) |
| Motor | Motorcode |
|---|---|
| 1.8 T 4x4 | 1U2|150PS(110KW) |
- ✓ 370x32 8J0615301F TTRS brake disc
- ✓ 6-piston 95535142153 / 95535142253 Porsche Cayenne ZR18 / ZL18 brake caliper
- ✓ front axle
- ✓ Rear axle
- ✓ Audi A3 8L, Audi S3 8L, TT 8N, Golf 4, Golf 4 R32, Bora, Beetle, Seat Leon
- ✓ camber adjustment
- ✓ Length: 60cm
- ✓ M10x1 curved on the outside
- ✓ M10x1 straight on the inside
- ✓ 35% better braking performance
- ✓ 75% more service life
- ✓ low dust generation
- ✓ 35% better braking performance
- ✓ 75% more service life
- ✓ low dust generation
- ✓ 35% better braking performance
- ✓ 75% more service life
- ✓ low dust generation
- ✓ Length: 57cm
- ✓ M10x1 curved on the outside
- ✓ M10x1 straight on the inside
- ✓ rim centric ring / extension bush, high-strength steel, for VW Golf MK4 Polo 9N Bora Audi A3 TT
- ✓ 334x32 1J0615301AA 1J0615302 A Golf 4 R32 brake disc
- ✓ 6-piston 7L6615123T / 7L6615124T Porsche Cayenne / VW Tuareg brake caliper
- ✓ front axle
- ✓ No more play
- ✓ High quality brass
- ✓ For all 02m 02q 02a and 02j gearboxes
- ✓ More direct shifting
- ✓ High-quality aluminum
- ✓ Golf 4 Audi A3 Seat with cable shift
- ✓ 256x22 8L0615601 VW / Audi brake disc
- ✓ 1-piston 8N0615423C / 8N0615424C R32 / S3 brake caliper
- ✓ rear axle
- ✓ 350x32 A1644210512 Mercedes W164 brake disc
- ✓ 6-piston 955351421 / 955351422 Z18 brake caliper
- ✓ front axle
- ✓ cast noses
- ✓ engine mounting
- ✓ Repair sheet metal
- ✓ 1.8 T 20V engines
- ✓ 240 clutch
- ✓ lightens 5.0 kg
- ✓ 310x22 3D0615601D VW Phaeton brake disc
- ✓ 1-piston 8N0615423C / 8N0615424C VW Golf 4 R32 / Audi S3 brake caliper
- ✓ rear axle