VW Golf 3 Brake Caliper Adapter Porsche Vr6 GTI Passat 35 16V ZR17 ZL17 Front axle Brake System 334x32
- ✓ 334x32 1J0615301AA 1J0615302 A Golf 4 brake disc
- ✓ 6-piston 7L6615123T / 7L6615124T Porsche Cayenne/ VW Tuareg brake caliper
- ✓ front axle
Brake caliper adapter for front axle brake disc system to fix Porsche /Brembo ZR17 6 piston brake calipers with R32 brake disc,diameter 334 x 32mm on all VW with bolt circle connection 5x100 on the front axle. Installed in e.g
- VW Golf 3 2,0l 16V und VR6 GTI
- VW Passat 2,0l 16V 35i und VR6 GTI
- VW Corrado 2,0l 16V und VR6 GTI
- Seat Toledo
Required material for installation:
- Brake calipers from the Porsche Cayenne or VW Tuareg (17 inch variant) part number: 7L6 615 123 T and 7L6 615 124 T
- Brake pads are used by the 18 inch calipers Item No: 7L0 698 151 J
- Brake discs from the Golf 4 R32 334x32 mm part number 1J0 615 301AA and 1J0 615 302 A
Advantages:
- Best possible deceleration values and performance, also indispensable for performance increases
- 17 inch rims can be driven
- Components come from series production by VW
- The material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles
- Including complete with screw material
Scope of delivery:
- 2 high resistant adapter-plates allowing the installation of the brake calipers and disc(see photo)
- 1 Complete set of high resistant srews
- Template to check whether the brake system fits under your rim
- Certificate of material;proves the conformity of our product in Germany and simplifies authorization by authorities.
- Stress analysis / FEM calculation for entry
Tips, information and advice:
- To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
- For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
- We cannot give you a generalised answer as to which rim size you can ride after your brake conversion. There are simply too many different wheel rims. For this reason, we have developed a template with which you can easily check whether the brake system kit fits under your rim. We have included a link to the template in the description. If your rim does not fit, you can simply use wheel spacers. >> Go directly to customised wheel spacers <<
- Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, which you can use to assemble and then install them according to your requirements. Click here for the steel flex configurator >> Configure steel flex brake line <<
- The handbrake cable must always be used from the installed calliper, which means that the new handbrake cable may have to be adjusted slightly. For conversions in which the original calliper is still used and the original handbrake cable can be used, you may have to route it more directly to compensate for the larger disc diameter and longer travel
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Login
23 September 2025 08:38
aldun-6389
Delivered as described
15 October 2025 15:36
Christian N
Kann man bedenkenlos weiterempfehlen!
20 September 2023 08:09
Mustafa Kemal A
Top Qualität, ab jetzt bestelle ich immer bei epytec.👍
21 November 2016 20:48
g.matthias93
Perfekt! :-)
28 February 2018 13:43
golf1racing-2009
Alles perfekt , sehr passgenau
14 March 2025 08:16
passatb3-2008
Excellent product thank you 👍
16 July 2018 13:22
shauncycle
Great shopping with you. Thanks again.
21 November 2017 15:28
oktay31oktay
Perfekt!!!
9 November 2023 14:45
wpharrigan
Quick reply. Great quality
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
| Motor | Motorcode |
|---|---|
| 2.8 VR6 | 3A5|174PS(128KW) |
| 2.9 VR6 Syncro | 35I|184PS(135KW) |
| 2.8 VR6 | 35I|174PS(128KW) |
| 2.9 VR6 Syncro | 3A5|184PS(135KW) |
| Motor | Motorcode |
|---|---|
| 2.8 VR6 | 35I|174PS(128KW) |
| 2.8 VR6 | 3A2|174PS(128KW) |
| Motor | Motorcode |
|---|---|
| 2.9 VR6 | 53I|190PS(140KW) |
| Motor | Motorcode |
|---|---|
| 2.8 VR6 | 1H1|174PS(128KW) |
| 2.9 VR6 Syncro | 1H1|190PS(140KW) |
| Motor | Motorcode |
|---|---|
| 2.8 VR6 | 1H2|174PS(128KW) |
| Motor | Motorcode |
|---|---|
| 2.9 VR6 Syncro | 1H5|190PS(140KW) |
| Motor | Motorcode |
|---|---|
| 2.8 VR6 | 3A5|174PS(128KW) |
| 2.9 VR6 Syncro | 35I|184PS(135KW) |
| 2.8 VR6 | 35I|174PS(128KW) |
| 2.9 VR6 Syncro | 3A5|184PS(135KW) |
| Motor | Motorcode |
|---|---|
| 2.8 VR6 | 35I|174PS(128KW) |
| 2.8 VR6 | 3A2|174PS(128KW) |
| Motor | Motorcode |
|---|---|
| 2.9 VR6 | 53I|190PS(140KW) |
| Motor | Motorcode |
|---|---|
| 2.8 VR6 | 1H1|174PS(128KW) |
| 2.9 VR6 Syncro | 1H1|190PS(140KW) |
| Motor | Motorcode |
|---|---|
| 2.8 VR6 | 1H2|174PS(128KW) |
| Motor | Motorcode |
|---|---|
| 2.9 VR6 Syncro | 1H5|190PS(140KW) |
- ✓ Length: 52cm
- ✓ M10x1 outside 45° curved
- ✓ M10x1 inside straight
- ✓ 310x22 3D0615601D VW Phaeton brake disc
- ✓ 4-piston 996352421 / 996352422 Porsche 996 brake caliper
- ✓ rear axle
- ✓ Length: 50cm
- ✓ M10x1 curved on the outside
- ✓ M10x1 straight on the inside
- ✓ 310x22 3D0615601D VW Phaeton brake disc
- ✓ 1-piston 8N0615423C / 8N0615424C VW Golf R32 V6 / S3 brake caliper
- ✓ rear axle
- ✓ gearbox holder
- ✓ Golf 2, Golf 3, Passat, Corrado, Jetta, Vento
- ✓ 02m / R32 V6 1.8T 6-speed gearbox DRP DQB DXW
- ✓ 334x32 1J0615301AA 1J0615302 A Golf 4 R32 brake disc
- ✓ 6-piston 7L6615123T / 7L6615124T Porsche Cayenne / VW Tuareg brake caliper
- ✓ front axle
- ✓ 334x32 1J0615301A 1J0615302A Golf 4 R3 brake disc
- ✓ 6-piston 95535142150 / 95535142250 Porsche Cayenne/ VW Tuareg brake caliper
- ✓ front axle
- ✓ 288x221H0615301 Passat 35i VR6 VW brake disc
- ✓ 1-piston 8N0615423C / 8N0615424C VW Golf R32 V6 / S3 brake caliper
- ✓ rear axle
- ✓ for rear axle: Golf MK1, Golf MK1 Cabrio, MK2, MK3, GTI, VR6, Caddy 14d,Jetta, Corrado, Passat 35i, Scirrocco, Vento, Polo 6N1, Seat Cordoba, Ibiza,Toledo
- ✓ brake caliper: Porsche , reference: 996.352.421 + 996.352.422
- ✓ rear axle: brake caliper with mounting brackets from Audi S3 8L or VW Golf R32
- ✓ brake disc: Passat 35i 280mm
- ✓ More direct shifting
- ✓ High-quality aluminum
- ✓ Golf 4 Audi A3 Seat with cable shift
- ✓ No more play
- ✓ high-quality aluminum
- ✓ Golf VR6 cable shifters
- ✓ 5x100 bolt circle
- ✓ Plug & Play
- ✓ VW Golf 2-3 / Passat / Corrado
- ✓ Hydraulic line
- ✓ Golf 1, 2, 3, Corrado, Vento, Scirocco, Caddy
- ✓ Conversion to 6-speed 02M,/02Q or 5-speed 02A,/02J transmission
- ✓ 310x22 3D0615601D VW Phaeton brake disc
- ✓ 1-piston 8N0615423C / 8N0615424C R32 / S3 brake caliper
- ✓ rear axle
- ✓ For Golf 2 Corrado
- ✓ On Golf 4 Accelerator Pedal
- ✓ OE:6Q1723503K
- ✓ Hydraulic clutch slave cylinder
- ✓ Golf 1, 2, 3, Audi A3, Seat Leon
- ✓ Conversion to 6-speed 02M,/02Q or 5-speed 02A,/02J transmission
- ✓ 310x22 3D0615601D VW Phaeton brake disc
- ✓ 4-piston 955352421 / 955352422 Porsche Cayenne brake caliper
- ✓ rear axle
- ✓ 330x22 4F0615601B Audi A6 brake disc
- ✓ 4-piston 955352421 / 955352422 Porsche Cayenne brake caliper
- ✓ rear axle
- ✓ Length: 50cm
- ✓ M10x1 curved on the outside
- ✓ M10x1 straight on the inside