Gesucht nach BMW | Z3 Roadster | 1.9i | E36
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
- ✓ Adapter for conversion to single ignition coils for BMW E30 , E36 and Z3 with M42 and M44 engines
- ✓ seat damping for the driver and passenger seat on the BMW E36 Z3 with electronic seat adjustment
- ✓ for front axle: BMW E36
- ✓ brake caliper: BMW Performance 6 piston, reference left 34116786741 + right 34116786742
- ✓ brake disc: BMW E46 M3 Z3 CSL (VA) 345x28mm
- ✓ for BMW E30, E36, or Z3
- ✓ engine: M30 / M5 (S38) from BMW E32 and E34 (3,0 and 3,5l from 5er and 7er)
- ✓ Adapter for conversion to single ignition coils for the BMW E30, E36 and Z3 with M42 and M44 engines
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
- ✓ 1x clutch release lever / fork for BMW series 3 E46 E90
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ eccentric for article 590 galvanized
- ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 7m
- ✓ bottom length: 20mm
- ✓ top length: 23mm
- ✓ width: 18mm
- ✓ Spacer bolt for easy installation of the ignition coil adapter plate Article 257 for the BMW E30, E36 and Z3 with M42 and M44 engines
Hexagonal nut M08
Thread right
Galvanized
- ✓ eccentric for article 244, galvanized
- ✓ 2x drive shaft adapters for VW Golf MK1
- ✓ drift spacer / steering lock spacer in oder to increase steering angle on models BMW E30 E36 E46 Z1 Z3
- ✓ spacing plate / bush / bushing for brake caliper adapter
- ✓ hexagon nut: M10
- ✓ thread: right
- ✓ material: stainless steel
- ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line
Hexagonal coupling nut M8x30
Thread right
Galvanized
- ✓ high-quality wheel / lug nuts with cone collar 60° M14x1.5 with the best rust protection
- ✓ 1x straight fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ Width: 24mm
- ✓ Height: 47mm
Hexagonal coupling nut M8x30
Thread right
Galvanized
Hexagon nut self-locking M12
Ring non metallic (plastic)
Thread right
Galvanized
Zinc-plated press-in nut M06 with right hand thread
Hexagon thin nut M08
Thread left
Galvanized
- ✓ 1x inner joint with 108mm diameter and matching gaiter, including fixation material
- ✓ EBC brake disc 334x32 Manufacturer number: GD1153 with bolt circle 4x100 and 5x100 suitable for our brake caliper adapters Article 266
- ✓ Golf 4 R32
- ✓ Zimmermann brake disc 370x32 Manufacturer's ref. 100.3367.70 with bolt circle 5x100 and 5x112 suitable for our brake caliper adapter article 742
- ✓ Audi TT
- ✓ Seat Leon
- ✓ Zimmermann brake disc 330x32 Manufacturer's code: 400.3673.52 with drilled hub bore to 68mm, suitable for our brake caliper adapter article 868
- ✓ Mercedes Benz E Class W210, S210, SLK CLK, Chrysler Crossfire
- ✓ complete brake system for rear axle: all four-wheel drive Golf 4 Bora Vento Audi A3 series
- ✓ Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422
- ✓ original brake calipers with carrier for handbrake from Golf 4 R32
- ✓ Brake disc 310x22 rear from VW Phaeton Manufacturer No.: 3D0 615 601 D
- ✓ for front axle: BMW E36
- ✓ brake caliper: Porsche 996 series, Porsche original reference 996.351.425/426
- ✓ brake disc: Mercedes Benz 330x28mm W203, reference A2034211312
- ✓ for vehicles with bolt circle / pitch circle: 5x120 and wheel hub centering: 72.5
- ✓ on brake discs with bolt circle / pitch circle: 5x120
- ✓ brake disc centering: 79mm
- ✓ widening/enlarging per wheel: 6mm