Gesucht nach VW | Golf VIII Variant | 2.0 TSI 4motion | CG5
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
- ✓ for front axle with alloy steering knuckle: VW Golf 7 8 Audi A3 Cupra Leon Seat Leon Skoda
- ✓ brake caliper: Porsche Cayenne 958 GTS Panamera, reference 7PP615149J / 7PP615150J (Shank length from the brake caliper for the screws 82mm)
- ✓ brake disc: Mercedes Benz GL - Klasse 375x36mm, reference 166 421 0912
- ✓ for front axle: Golf 7 8 Audi A3 8V Seat Skoda, etc.
- ✓ brake caliper: Porsche Cayenne 958 GTS Panamera / brake caliper 390mm brake system reference: 7PP615149J / 7PP615150J ((brake caliper for the 390mm system)
- ✓ brake disc: Mercedes Benz GL - Klasse 390x36mm reference: 166 421 0512
- ✓ complete brake system for front axle: VW Golf 7 8 Audi A3 Cupra Leon Seat Leon Skoda u.v.m.
- ✓ Brake caliper: Porsche Cayenne 958 GTS Panamera brake caliper part number: 7PP615149J / 7PP615150J (shaft length of the brake caliper for the screws 82mm)
- ✓ Brake Disc: MERCEDES-BENZ ML/GL-KLASSE 375x36mm Part Number: 166 421 0912
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ eccentric for article 590 galvanized
- ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 7m
- ✓ bottom length: 20mm
- ✓ top length: 23mm
- ✓ width: 18mm
Hexagonal nut M08
Thread right
Galvanized
- ✓ eccentric for article 244, galvanized
- ✓ 2x drive shaft adapters for VW Golf MK1
- ✓ spacing plate / bush / bushing for brake caliper adapter
- ✓ hexagon nut: M10
- ✓ thread: right
- ✓ material: stainless steel
- ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line
- ✓ for front axle with aluminium stub axle: VW Golf 7 8 Audi A3 Cupra Leon Seat Leon Skoda
- ✓ Porsche Cayenne 958 GTS Panamera brake calipers part number: 7PP615149J / 7PP615150J (shaft length of the brake caliper for the screws 82mm)
- ✓ Brake discs from Mercedes Benz CLS 500 Coupe 360x36mm part number: A0004211712 / A2184210212
- ✓ 1x inner joint with 108mm diameter and matching gaiter, including fixation material
Hexagonal coupling nut M8x30
Thread right
Galvanized
Hexagon nut self-locking M12
Ring non metallic (plastic)
Thread right
Galvanized
Zinc-plated press-in nut M06 with right hand thread
Hexagon thin nut M08
Thread left
Galvanized
Hexagonal coupling nut M8x30
Thread right
Galvanized
- ✓ high-quality wheel / lug nuts with cone collar 60° M14x1.5 with the best rust protection
- ✓ 1x straight fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ Width: 24mm
- ✓ Height: 47mm
- ✓ complete brake system for rear axle: all four-wheel drive Golf 4 Bora Vento Audi A3 series
- ✓ Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422
- ✓ original brake calipers with carrier for handbrake from Golf 4 R32
- ✓ Brake disc 310x22 rear from VW Phaeton Manufacturer No.: 3D0 615 601 D
- ✓ Zimmermann brake disc 370x32 Manufacturer's ref. 100.3367.70 with bolt circle 5x100 and 5x112 suitable for our brake caliper adapter article 742
- ✓ Audi TT
- ✓ Seat Leon
- ✓ Zimmermann brake disc 330x32 Manufacturer's code: 400.3673.52 with drilled hub bore to 68mm, suitable for our brake caliper adapter article 868
- ✓ Mercedes Benz E Class W210, S210, SLK CLK, Chrysler Crossfire
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
Bushing
Ø ouside 19mm
Ø inside 11mm
Length 12mm
Stainless steel V2A
Fastening bracket for brake hose.
- ✓ 1x pilot bearing / ball bearing for flywheel
- ✓ outer diameter: 32mm
- ✓ inner diameter: 15mm
- ✓ height: 9mm
- ✓ spare bolts for cardan shaft flange
- ✓ 2-part steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- ✓ external diameter: 25mm
- ✓ internal diameter: 10,2mm
- ✓ length: 0,75mm
- ✓ material: steel electrolytically galvanized
- ✓ external diameter: 19mm
- ✓ internal diameter: 11mm
- ✓ length: 9mm
- ✓ material: steel-blank