Bushing Ø outside 19; Ø inside 11; length 12 Stainless steel V2A

Reinforcement / reinforcing plate made of 10mm high quality laser-cut steel. Thanks to our plate, the block becomes much more stable. The boost pressure and the engine performance are considerably improved. Recommended for better performance and for engine conversion to a turbocharger. For the conversion, the chain for the oil pump must be longer than the originals. You can order these directly from the accessories for this article.For all VW / Audi 2,0l TFSI and turbo  CCZ, CCZB. mounted on following vehicles: Audi A3  Audi TT Seat Altea XL, Leon  VW Eos  VW Golf MK5 and MK6 VW Passat, Tiguan, Scirocco  Delivery: 1x reinforcing plate made of high quality steel for Audi A3, TT, Seat Altea XL, Leon VW Eos Golf MK5, MK6,  Passat,  Tiguan, Scirocco  All required screws in high quality 12.9 and spacer sleeves / bushs. material certificate

Brake caliper adapter to convert the rear axle from the Golf Mk7, Audi A3 series to Porsche Cayenne brake calipers.Combined with the Audi A6 A7 brake discs 356x22 mm. The Porsche calipers are connected to the hydraulics of the vehicle and can thus develop an enormous braking force. However, these do not have handbrake functions. The rear axle of Golf Mk7R is additionally used for a handbrake caliper adapter. The hydraulic connection is thereby closed with a blind plug / closure cap, thus this serves only as a hand brake caliper. Suitable for the following VW and Seat models with aluminium axle - manufacturer number: 5Q0505435J / 5Q0505436J , 5Q0505435G / 5Q0505436G, 5Q0505435H / 5Q0505436H VW Golf 7 VW Golf 7R Audi A1 8X Audi A3 8V Seat Leon ST 5F Skoda Octavia III 5E Advantages of this brake system: top deceleration, without comparison with conventional brake discs better performance supplied material certificate Required components: brake caliper: Porsche Cayenne, rear xale, reference 955.352.421 + 955.352.422 / Brembo reference 20.7673.03 + 20.7673.04 original brake calipers with carrier for handbrake from Golf 7R part number: Part number brake caliper: 5Q0615424 / 5Q0615424 Part number brake caliper carrier: 5Q0615425 / 8V0615425B brake disc: Audi A6 A7 356x22 mm, reference 4H0 615 601 F Delivery: 2x brake caliper adapters for Golf Mk7 Audi A3 series, rear axle 2x centric rings high strength mounting screws material certificate Stress analysis / FEM calculation for entry Installation instructions (click here)

With our high-performance brake system kit for the VW Golf 7, Golf 7R, Audi A1 8X, Audi A3 8V, Seat Leon ST 5F, Skoda Octavia III 5E and many other cars, you can convert your rear axle to a 4-piston brake system in conjunction with the VW Golf 7R handbrake caliper and achieve ideal performance. With this high performance brake system kit you can drive the Porsche Cayenne 4-piston Brembo brake calipers and the VW Golf 7R handbrake caliper in combination with the 356x22 mm brake discs from the Audi A6 A7 on the VW Golf 7, Golf 7R, Audi A1 8X, Audi A3 8V, Seat Leon ST 5F, Skoda Octavia III 5E and many other cars. Another advantage of our brake system kit is that it is equipped with the same original brake calipers and brake discs that are also installed in series-production cars. These OE parts not only make the replacement of the brakes simple and uncomplicated, but also facilitate the registration with the TÜV. The brake system kit is not only sporty, but also suitable for everyday use and, thanks to the perforated sports brake discs in conjunction with our ceramic lining, enables ideal performance while reducing brake dust, temperature and abraison. With this high-performance brake kit you can get started straight away and have everything you need to convert your rear axle to a 4-piston brake system. The high-performance brake kit is suitable for the following cars with alloy steering knuckles (OE: 5Q0505435J / 5Q0505436J) VW Golf 7 VW Golf 7R Audi A1 8X Audi A3 8V Seat Leon ST 5F Skoda Octavia III 5E Advantages of this brake system: our components, such as brake callipers and brake discs, come from series-production cars and are OE parts. This makes replacing the brakes simple and uncomplicated and facilitates registration with the TÜV. The material certificate included in the scope of delivery enables registration by individual acceptance even for series-production cars. High-performance brake pads with longer service life than the original pads extreme deceleration values also in combination with our rear axle brake system directly fitting to the above mentioned models and therefore easily rebuildable to original condition at any time our EPYTEC brake caliper adapters require no sending in of your stock parts, no re-welding, re-milling or re-drilling. Note: the kit includes new brake calipers with Epytec logo as standard. For an additional charge, we can also supply the brake calipers in the colour of your choice and without the logo, in which case the delivery time is about 2-3 weeks longer. Get our high performance brake kit now and experience ideal performance and durability. Suitable for all listed cars with a aloy steering knuckle (not suitable for cars with an steel steering knuckle). VW Golf 7 R handbrake caliper is not included in delivery original brake calipers with carrier for handbrake from Golf 7R part number: Part number brake caliper: 5Q0615424 / 5Q0615424 Part number brake caliper carrier: 5Q0615425 / 8V0615425B Scope of delivery: 2x Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422 (left / right)Brembo 20.7673.03/20.7673.04(left / right) including complete new brake calliper bracket kit matching set of Rotinger Sport brake discs Audi A6 A7 part no.: 4H0 615 601 F ceramic brake pads for less brake dust and longer lifetime 2x brake caliper adapter for VW Golf 7 VW Golf 7R Audi A1 8X Audi A3 8V Seat Leon ST 5F Skoda Octavia III 5E u.v.m. 2x matching steel braided lines Assembly aid for brake disc assembly high-strength bolt material Material certificate Stress analysis / FEM calculation for registration Installation instructions (click here)