Gesucht nach Mercedes-Benz | Vito/Mixto Kasten | 119 | W639
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
- ✓ for front axle: Mercedes W639 Viano / Vito ; Mercedes W447 Viano / Vito
- ✓ brake caliper: Mercedes W219 CLS 55 AMG 8-piston, reference A0034200983 / A003420108 ; Brembo reference 20.7919.01 / 20.7919.02
- ✓ brake disc: Mercedes Benz GL - Klasse 375x36mm, reference 166 421 0912
- ✓ for front axle: Mercedes W639 Viano / Vito, Mercedes W447 Viano / Vito
- ✓ brake caliper: Mercedes C63 AMG W205 6-piston, reference 2054216998 / 2054217098
- ✓ brake disc: Mercedes Benz ML 63 W166 - Klasse 390x36mm, reference A1664210512
- ✓ for e.g. Mercedes W639 W447 Viano / Vito, etc.
- ✓ Connection 1 M10x1 male thread straight
- ✓ Connection 2 M10x1 female thread straight
- ✓ Length 57cm long / transparent sheathed
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 7m
- ✓ bottom length: 20mm
- ✓ top length: 23mm
- ✓ width: 18mm
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ for front axle: Mercedes W639 Viano / Vito ; Mercedes W447 Viano / Vito
- ✓ brake caliper: Mercedes W212 W218 AMG 6-piston, reference A2314212698 ; Brembo reference : 20.A495.04
- ✓ brake disc: Mercedes Benz W205 W213 390x36mm, reference : A2314211812
- ✓ or
- ✓ Brake disc from Mercedes GLS 63 AMG (X166) from the front axle in 390x36mm Part Number: A2304211212 Brembo No: 09.9313.33
- ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston
- ✓ eccentric for article 590 galvanized
Hexagonal nut M08
Thread right
Galvanized
- ✓ eccentric for article 244, galvanized
- ✓ 2x drive shaft adapters for VW Golf MK1
- ✓ spacing plate / bush / bushing for brake caliper adapter
- ✓ hexagon nut: M10
- ✓ thread: right
- ✓ material: stainless steel
- ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line
- ✓ EBC brake disc 334x32 Manufacturer number: GD1153 with bolt circle 4x100 and 5x100 suitable for our brake caliper adapters Article 266
- ✓ Golf 4 R32
- ✓ Zimmermann brake disc 370x32 Manufacturer's ref. 100.3367.70 with bolt circle 5x100 and 5x112 suitable for our brake caliper adapter article 742
- ✓ Audi TT
- ✓ Seat Leon
- ✓ Zimmermann brake disc 330x32 Manufacturer's code: 400.3673.52 with drilled hub bore to 68mm, suitable for our brake caliper adapter article 868
- ✓ Mercedes Benz E Class W210, S210, SLK CLK, Chrysler Crossfire
- ✓ complete brake system for rear axle: all four-wheel drive Golf 4 Bora Vento Audi A3 series
- ✓ Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422
- ✓ original brake calipers with carrier for handbrake from Golf 4 R32
- ✓ Brake disc 310x22 rear from VW Phaeton Manufacturer No.: 3D0 615 601 D
- ✓ 1x inner joint with 108mm diameter and matching gaiter, including fixation material
Hexagonal coupling nut M8x30
Thread right
Galvanized
- ✓ Installation location: front
- ✓ suitable for Lancia, Alfa, Bugatti, Chrysler, Ford
- ✓ high-quality wheel / lug nuts with cone collar 60° M14x1.5 with the best rust protection
- ✓ 1x straight fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ Width: 24mm
- ✓ Height: 47mm
Hexagonal coupling nut M8x30
Thread right
Galvanized
Hexagon nut self-locking M12
Ring non metallic (plastic)
Thread right
Galvanized
Zinc-plated press-in nut M06 with right hand thread
Hexagon thin nut M08
Thread left
Galvanized
- ✓ Zimmermann brake disc 375x36 Manufacturer's code 400.3684.20 with hub bore 68mm for our brake caliper adapters Article 1199
- ✓ Brembo brake disc two-piece 370x30mm Manufacturer number: 09.D482.33
- ✓ Audi A6 C8 A7
- ✓ 1 set of steering knuckle / wheel bearing housing with wheel hub in 5x112 bolt circle for the VW Golf 1, Caddy, Scirocco, Jetta series
- ✓ complete brake system for rear axle: all four-wheel drive Golf 2 3 Syncro VR6
- ✓ Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422
- ✓ original brake calipers with carrier for handbrake from Golf 4 R32
- ✓ Brake disc 310x22 rear from VW Phaeton Manufacturer No.: 3D0 615 601 D
- ✓ Steering knuckle for the front axle of the VW Golf 1, Jetta 1, Scirocco
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- ✓ steering angle limiter / turning angle reducer suitable for many vehicles
Adapter with reduction from M12x1,0 on M10x1,0(inner thread)for connection between brake hose and braking force regulator.
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- ✓ hub centric ring for brake disc
- ✓ internal diameter: 57,10 mm
- ✓ external diameter: 66,90 mm
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- ✓ steering angle limiter / turning angle reducer diameter 24 mm
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles