Gesucht nach BMW | 3er Coupe | 320xd | E92
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
- ✓ for front axle: BMW E92 E93 E91, etc.
- ✓ brake caliper: BMW F30/31 4-piston, reference left: 34116799469 / right: 34116799470
- ✓ brake disc: BMW M2/3/4 , front axle, 380x30mm, referencer: left: 34112284809 / right: 34112284810
- ✓ clutch pin / clutch locking pin made of brass for all common BMW models such as e.g. E30 E46 E81 E88 and much more
- ✓ for front axle: BMW E92 E93 E91 E90 etc.
- ✓ brake caliper: BMW Performance 6-piston135i, reference 34 11 6 786 741
- ✓ brake disc: BMW E46 M3 CSL , front, 345x28mm, reference : 3411 2 282 446
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ eccentric for article 590 galvanized
- ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 7m
- ✓ bottom length: 20mm
- ✓ top length: 23mm
- ✓ width: 18mm
Hexagonal nut M08
Thread right
Galvanized
- ✓ eccentric for article 244, galvanized
- ✓ 2x drive shaft adapters for VW Golf MK1
- ✓ spacing plate / bush / bushing for brake caliper adapter
- ✓ hexagon nut: M10
- ✓ thread: right
- ✓ material: stainless steel
- ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line
Hexagonal coupling nut M8x30
Thread right
Galvanized
- ✓ high-quality wheel / lug nuts with cone collar 60° M14x1.5 with the best rust protection
- ✓ 1x straight fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ Width: 24mm
- ✓ Height: 47mm
- ✓ assembly position: front
- ✓ suitable for BMW E21 E30 E36 E46 E90 F30 F30, F35, F80 E84 F48 320i 320d xDrive18d
Hexagonal coupling nut M8x30
Thread right
Galvanized
Hexagon nut self-locking M12
Ring non metallic (plastic)
Thread right
Galvanized
Zinc-plated press-in nut M06 with right hand thread
Hexagon thin nut M08
Thread left
Galvanized
- ✓ 1x inner joint with 108mm diameter and matching gaiter, including fixation material
- ✓ complete brake system for rear axle: all four-wheel drive Golf 4 Bora Vento Audi A3 series
- ✓ Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422
- ✓ original brake calipers with carrier for handbrake from Golf 4 R32
- ✓ Brake disc 310x22 rear from VW Phaeton Manufacturer No.: 3D0 615 601 D
- ✓ Zimmermann brake disc 370x32 Manufacturer's ref. 100.3367.70 with bolt circle 5x100 and 5x112 suitable for our brake caliper adapter article 742
- ✓ Audi TT
- ✓ Seat Leon
- ✓ Zimmermann brake disc 330x32 Manufacturer's code: 400.3673.52 with drilled hub bore to 68mm, suitable for our brake caliper adapter article 868
- ✓ Mercedes Benz E Class W210, S210, SLK CLK, Chrysler Crossfire
- ✓ EBC brake disc 334x32 Manufacturer number: GD1153 with bolt circle 4x100 and 5x100 suitable for our brake caliper adapters Article 266
- ✓ Golf 4 R32
- ✓ high-quality wheel / lug nuts with cone collar 60° M14x1.5 with the best rust protection
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ high-quality wheel / lug nuts with cone collar 60° M12x1.5 with the best rust protection
- ✓ high-quality wheel / lug nuts with cone collar 60° M12x1.5 with the best rust protection
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ high-quality wheel / lug nuts with cone collar 60° M12x1.5 with the best rust protection
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ cross-head countersunk screw
- ✓ size:M06x16
- ✓ alloy: galvanized
- ✓ strength class 8.8
Hexagonal screw with flange partial thread
Type: M06x20
Galvanized
Class: 8.8
cylinder head bolts with hexagon socket (flat head)
Size: M12x25
thread pitch 1.5
Surface blank
Qualitye 10.9
- ✓ DIN DIN933
- ✓ size: M5-M16
- ✓ length 10-120mm
- ✓ high-strength
Hexagon screw high resistance entirely thread
Type: M12x50
Blank
Quality : 10.9
- ✓ screw wiht hexagon socket
- ✓ dimension: M08x25
- ✓ galvanized
- ✓ quality 10.9
- ✓ DIN DIN933
- ✓ size: M5-M16
- ✓ length 10-120mm
- ✓ high-strength
Hexagonal screw entirely thread
Type: M08x30
Galvanized
Quality: 4.8
Hexagonal socket head cap srew high resistance entirely thread
Type: M12x35
Thread 1.5
Blank
Quality 12.9