You can find out everything about your order via your -> View customer account
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT

Brake Caliper Adapter BMW E92 E93 E91 6-piston Caliper BMW 135i 345x28 Brake Disc BMW E46 CSL

€222.23*

Available
Delivery by Tuesday, 21.05.2024 if you order within the next 4 Hours.
Product number: 967
Weight: 2.2 kg
Einbauort: vorne
Lochabstand Achsschenkel: 122mm
Lochabstand Bremssattel : 202mm
Your benefits
  • Einfache TÜV Eintragung
  • Qualität Made in Germany
  • Faire Preise ohne zwischenhandel du kaufst direkt beim Hersteller und Enwickler des Produktes
  • Weltweit Nr 1 in Sachen Tuning Adapter
  • 15 Jahre Expertenwissen
  • 10 Jahre Garantie

Brake caliper adapter, front axle, on models BMW E92 E93 E91 E90, etc., for conversion to dBMW Performance 6-piston brake calipers, combined with the 345x28mm BMW E46 CLS brake discs.

Suitable for the following vehicles with a hole size of 122mm on the axle mount:

  • BMW E90
  • BMW E91
  • BMW E92
  • BMW E93
  • BMW E82 (anchor plate must be shortened by a few cm on the underside)

Advantages of this brake system:

  • top deceleration, without comparison with conventional brake discs
  • easy assembly
  • better performance
  • supplied material certificate
  • can easily be restored to the original state

Required components:

  • brake caliper: BMW Performance 6-piston135i, reference 34 11 6 786 741
  • Brake pads from the BMW 135i Part No. 34 11 6 786 044
  • brake disc: BMW E46 M3 CSL , front, 345x28mm, reference : 3411 2 282 446

Delivery:

  • 2x brake caliper adapters for  BMW E92 E93 E91 E90, etc.
  • high-strength mounting screws
  • material certificate

Tipps, Infos und Hinweise:

  • Zur besseren Belüftung der Bremsanlage empfehlen wir die Ankerbleche/Bremsstaubbleche zu entfernen.
  • Welche Felgengröße du nach deinem Bremsenumbau fahren kannst, können wir pauschal nicht beantworten. Es gibt einfach zu viele unterschiedliche Felgen. Es kann in seltenen Fällen vorkommen, dass die Felgen am Bremssattel minimal anliegt, dann können einfach Spurverbreiterungen verwendet werden.Jetzt direkt zu >> Spurverbreiterungen nach Wunsch <<
  • Den Adapter mit den benötigten Komponenten zu verbauen um anschließend zu prüfen ob ggf. neue Bremsleitungen benötigt werden, da es je nach Modell sein kann das die alten nicht lang genug sind, oder vom Anschluss her nicht passen. Wir empfehlen durch den deutlich besseren Wirkungsgrad auf Stahlflexleitugen zu wechseln, eigens für diese Funktionsweise haben wir dafür einen Stahlflexkonfigurator entwickelt, indem du diese nach deinen Wünschen zusammenstellen und anschließend verlegen kannst.hier geht’s zum Stahlflexkonfigurator >> Stahlflex-Bremsleitung konfigurieren <<

Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.

Einbauort: vorne
Lochabstand Achsschenkel: 122mm
Lochabstand Bremssattel : 202mm

3 of 3 reviews

5 out of 5 stars


100%

0%

0%

0%

0%


Leave a review!

Share your experiences with other customers.


4 August 2022 20:55

Matthias H

Adapter waren super passgenau und die Schrauben waren auch direkt mit dabei👍 Auch die Eintragung hat ohne Probleme geklappt. So wünscht man sich das, deswegen volle 5 Sterne!

1 July 2021 06:10

Lukas H

Super Verarbeitung, top Passgenauigkeit, sehr zu empfehlen 👌

2 July 2020 21:30

Christian D

sehr sauber verarbeiteter Adapter, sieht alles sehr durchdacht aus. Neue Schrauben sind auch dabei, genauso wie ein Materialzertifikat.

  • Can I also use other brake discs as specified in the required components?
  • No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems

  • Can I also use other brake calipers as specified in the required components?
  • No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:

Questions? Click here for the contact form

Passendes Zubehör

Steel Brake Line Steel Brake Line Custom Configurator

€46.95*
Item number: SF1
2xBMW 3 Coupe M3 E46 brake discs Zimmermann sports 345x28 Z4 Roadster E85 Z4 Coupe E86 150.3422.70
  • ✓ Zimmermann sports brake disc 345x28 Manufacturer number 150.3422.70
  • ✓ BMW 3 Coupe M3 E46 Z4 Roadster E85 Z4 Coupe E86

€681.26*
Item number: ZIM151
EBC Brake Pads Yellowstuff Front BMW 1er E81 1er Cabriolet E88 1er Coupe E82
  • ✓ assembly position: front
  • ✓ suitable for BMW 1er E81 1er Cabriolet E88 1er Coupe E82

€239.62*
Item number: DP41995R
EBC Brake Pads Blackstuff Front BMW 1er E81 1er Cabriolet E88 1er Coupe E82
  • ✓ assembly position: front
  • ✓ suitable for BMW 1er E81 1er Cabriolet E88 1er Coupe E82

€130.98*
Item number: DP1995
EBC Brake Pads Redstuff Front BMW 1er E81 1er Cabriolet E88 1er Coupe E82
  • ✓ assembly position: front
  • ✓ Suitable for BMW 1er E81 1er Cabriolet E88 1er Coupe E82

€206.68*
Item number: DP31995C
You can find out everything about your order via your -> View customer account