Lightened Flywheel VW Polo 6N 1.4 1.6 L 16V Caddy 2 Seat Ibiza Corduba steel facile
- ✓ 1.4l, 1.6l 16V engines
- ✓ 200 clutch
- ✓ lightens 4.4 kg
£147.30*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Lightened high-strength flywheel made of chrome molybdenum.
Suitable for following engines
- 1,4l, 1,6l 16V on models: VW Polo 6N, VW Caddy 2, Seat Arosa, Seat Cordoba, Seat Ibiza
Advantages of our lightened flywheel:
- our flywheel weighs only 4,4 kg, the standard wheel over 6.3 kg
- all our flywheels are made of chrome moly steel with quality G 1.75, extremely suitable for high-speed motors
- recognized for unlimited HP
- significantly better acceleration due to less inertia
- the engine runs faster
- More direct response behaviour
- suitable for motorsports, racing or serial vehicles
- lower fuel consumption
- significant reduction of the turbo lag
- precision balancing, bearings are less affected
- including ring gear
- suitable for either a standard clutch or a high-performance clutch
- Our flywheels are registration-free as they have no direct effect on the actual performance.
Delivery:
- 1x lightened high-strength flywheel made of chrome molybdenum for all 1,4l, 1,6l 16V engines on models VW Polo 6N, VW Caddy 2, Seat Arosa, Seat Cordoba, Seat Ibiza
- Installation instructions
Our lightened flywheels are registration-free and therefore do not need to be registered.
Technical data:
Login
19 October 2022 21:35
southern-autoshine
Arrived quickly and as described many thanks
25 March 2022 16:33
natalserg-6
merci beaucoup
- Which screws can be used?
The original bolts can be reinstalled.
- Which clutch can be used with the Epytec flywheels?
You can continue to use the original clutch or an identical Sport / Performance clutch. Please check with the clutch manufacturer whether these are of the same design as the originals. If this is the case, then it will also fit 100%
- What is the friction coefficient of the flywheel?
In principle, the friction coefficient can be assumed to be at least the same as that of the original cast disc. Due to the higher alloyed steel, our pulleys are slightly better than the original cast pulley. Of course, the material of the friction disk also has a major influence here; this must be checked with the manufacturer of the friction disk
- What material are the flywheels made of?
The flywheel is made of 16MnCr (chromium molybdenum) steel, which means it has a density of 7.76 kg/dm³
- Does the flywheel have a TDC marking and other markings for the ignition?
The flywheel has no TDC marking, only the pin on the back, just like the original flywheel. Tip: To adopt the TDC marking, the original flywheel must be turned to the TDC point before disassembly and the new flywheel must be marked in exactly this position.
- Does the flywheel have the default unbalance or is it balanced to zero?
The flywheel is supplied with the default unbalance. Unbalance can be created as follows! We first balance the pulley to 0, then apply a test mass at the specified point, which corresponds exactly to the unbalance. The pulley is then balanced to 0 again with the test mass. If you now remove the test mass, you have exactly the specified unbalance.
- Do we only sell the ring gear / gearwheel of the flywheels?
No, we can only sell the flywheels complete.
- Why do I have to run in my clutch?
The principle of a clutch is similar to that of a brake system. The different materials / surfaces must first adapt to each other. This happens through friction. With standard clutches or organic linings, this happens relatively quickly, as the lining material is "softer" than with sintered metal linings.
| Motor | Motorcode |
|---|---|
| 1.4 16V | 6K1|75PS(55KW) |
| 1.6i | 6K1|101PS(74KW) |
| 1.4i 16V | 6K2|101PS(74KW) |
| 1.6i | 6K2|75PS(55KW) |
| 1.6i | 6K2|101PS(74KW) |
| 1.4 16V | 6K2|100PS(74KW) |
| 1.4 16V | 6K2|75PS(55KW) |
| 1.6 | 6K2|101PS(74KW) |
| 1.6i | 6K1|75PS(55KW) |
| 1.4i 16V | 6K1|101PS(74KW) |
| Motor | Motorcode |
|---|---|
| 1.6i | 6K5|101PS(74KW) |
| 1.4 16V | 6K5|75PS(55KW) |
| 1.6 | 6K5|101PS(74KW) |
| Motor | Motorcode |
|---|---|
| 1.4 16V | 6H1|100PS(74KW) |
| 1.4 16V | 6H|100PS(74KW) |
| Motor | Motorcode |
|---|---|
| 1.6i | 6K1|101PS(74KW) |
| 1.6i | 6K1|75PS(55KW) |
| 1.4i 16V | 6K1|101PS(74KW) |
| 1.4 16V | 6K1|75PS(55KW) |
| Motor | Motorcode |
|---|---|
| 1.4 16V | 6E1|100PS(74KW) |
| 1.4 16V | 6E1|75PS(55KW) |
| 1.4 16V | 60|100PS(74KW) |
| 1.4 16V | 6X1|100PS(74KW) |
| 1.4 16V | 60|75PS(55KW) |
| 1.4 16V | 6X1|75PS(55KW) |
| Motor | Motorcode |
|---|---|
| 1.6 | 1H2|101PS(74KW) |
| 1.6 | 1H2|75PS(55KW) |
| Motor | Motorcode |
|---|---|
| 60 1.4 | 9K9A|60PS(44KW) |
| 1.4 | 9K9A|75PS(55KW) |
| Motor | Motorcode |
|---|---|
| 1.4 16V | 6N2|75PS(55KW) |
| 1.4 16V | 6N2|101PS(74KW) |
| 100 1.4 16V | 6N1|100PS(74KW) |
| 75 1.6 | 6N1|75PS(55KW) |
| Motor | Motorcode |
|---|---|
| 1.4 16V | 9K9B|75PS(55KW) |
| 1.6 | 9K9B|75PS(55KW) |
| Motor | Motorcode |
|---|---|
| 1.6 | 1H5|101PS(74KW) |
| Motor | Motorcode |
|---|---|
| 1.6 | 1H1|75PS(55KW) |
| 1.6 | 1H1|101PS(74KW) |
| Motor | Motorcode |
|---|---|
| 1.4 16V | 6K1|75PS(55KW) |
| 1.6i | 6K1|101PS(74KW) |
| 1.4i 16V | 6K2|101PS(74KW) |
| 1.6i | 6K2|75PS(55KW) |
| 1.6i | 6K2|101PS(74KW) |
| 1.4 16V | 6K2|100PS(74KW) |
| 1.4 16V | 6K2|75PS(55KW) |
| 1.6 | 6K2|101PS(74KW) |
| 1.6i | 6K1|75PS(55KW) |
| 1.4i 16V | 6K1|101PS(74KW) |
| Motor | Motorcode |
|---|---|
| 1.6i | 6K5|101PS(74KW) |
| 1.4 16V | 6K5|75PS(55KW) |
| 1.6 | 6K5|101PS(74KW) |
| Motor | Motorcode |
|---|---|
| 1.4 16V | 6H1|100PS(74KW) |
| 1.4 16V | 6H|100PS(74KW) |
| Motor | Motorcode |
|---|---|
| 1.6i | 6K1|101PS(74KW) |
| 1.6i | 6K1|75PS(55KW) |
| 1.4i 16V | 6K1|101PS(74KW) |
| 1.4 16V | 6K1|75PS(55KW) |
| Motor | Motorcode |
|---|---|
| 1.4 16V | 6E1|100PS(74KW) |
| 1.4 16V | 6E1|75PS(55KW) |
| 1.4 16V | 60|100PS(74KW) |
| 1.4 16V | 6X1|100PS(74KW) |
| 1.4 16V | 60|75PS(55KW) |
| 1.4 16V | 6X1|75PS(55KW) |
| Motor | Motorcode |
|---|---|
| 1.6 | 1H2|101PS(74KW) |
| 1.6 | 1H2|75PS(55KW) |
| Motor | Motorcode |
|---|---|
| 60 1.4 | 9K9A|60PS(44KW) |
| 1.4 | 9K9A|75PS(55KW) |
| Motor | Motorcode |
|---|---|
| 1.4 16V | 6N2|75PS(55KW) |
| 1.4 16V | 6N2|101PS(74KW) |
| 100 1.4 16V | 6N1|100PS(74KW) |
| 75 1.6 | 6N1|75PS(55KW) |
| Motor | Motorcode |
|---|---|
| 1.4 16V | 9K9B|75PS(55KW) |
| 1.6 | 9K9B|75PS(55KW) |
| Motor | Motorcode |
|---|---|
| 1.6 | 1H5|101PS(74KW) |
| Motor | Motorcode |
|---|---|
| 1.6 | 1H1|75PS(55KW) |
| 1.6 | 1H1|101PS(74KW) |
- ✓ Hydraulic clutch slave cylinder
- ✓ Golf 1, 2, 3, Audi A3, Seat Leon
- ✓ Conversion to 6-speed 02M,/02Q or 5-speed 02A,/02J transmission
- ✓ Length: 57cm
- ✓ M10x1 curved on the outside
- ✓ M10x1 straight on the inside
- ✓ For Golf 2 Corrado
- ✓ On Golf 4 Accelerator Pedal
- ✓ OE:6Q1723503K
- ✓ gearbox holder
- ✓ Golf 2, Golf 3, Passat, Corrado, Jetta, Vento
- ✓ 02m / R32 V6 1.8T 6-speed gearbox DRP DQB DXW
- ✓ Complete KIT
- ✓ length 1.34m
- ✓ OE NR: C357721335E
- ✓ 4x100 to 5x112
- ✓ 20mm per side
- ✓ 57.1 -> 57.1 centering
- ✓ Hydraulic clutch complete conversion kit
- ✓ Golf 2, 3, Corrado, Jetta, Passat 35i
- ✓ Engine conversion from the Golf 4, original pedals are retained
- ✓ VW Golf 2, Golf 3 Passat, Corrado, Jetta, Vento
- ✓ 02a 02j 5 gear
- ✓ 1.8T 16V G60 conversion
- ✓ Suitable for our master brake cylinders
- ✓ plug and play
- ✓ quickly installed
Camber correction plates for installation on rear axle.Allow a perfect camber adjustment on your vehicle.
- ✓ Hydraulic line
- ✓ Golf 1, 2, 3, Corrado, Vento, Scirocco, Caddy
- ✓ Conversion to 6-speed 02M,/02Q or 5-speed 02A,/02J transmission
- ✓ 02M transmission conversion to FWD
- ✓ simple conversion
- ✓ Golf 1, Golf 2, 3, Golf 4 series
- ✓ 020 Gearbox
- ✓ 4&5Gang
- ✓ OE:VAG WZ 3104
Camber correction plates for installation on rear axle.Allow a perfect camber adjustment on your vehicle.
- ✓ Length: 57cm
- ✓ M10x1 curved on the outside
- ✓ M10x1 straight on the inside
- ✓ VW Golf 2, Golf 3 Passat, Corrado, Jetta, Vento
- ✓ Golf 3 16V, 1.8T transverse installation, Golf 4TDI
- ✓ 4 motions
- ✓ No more play
- ✓ High quality brass
- ✓ For all 02m 02q 02a and 02j gearboxes
- ✓ Hydraulic clutch slave cylinder
- ✓ Golf 4, Audi A3, Seat Leon, Skoda Oktavia
- ✓ 1J0721261D
- ✓ Passat, Golf 2, Golf 3, Corrado, Vento
- ✓ DQ250 DSG 6-speed gearbox
- ✓ 2.0TFSI, 1.8T 16V VR6 Turbo or R32 Turbo conversion
- ✓ More direct shifting
- ✓ High-quality aluminum
- ✓ Golf 4 Audi A3 Seat with cable shift