Brake Caliper Adapter VW T5 T6 Bus Adapter 365x34 Brake Disc Audi RS4 B7 Brake Caliper 8-piston

Brake caliper adapter on VW T5 bus model for conversion to RS4 B7 8-piston Brembo brake calipers, combined with the 365x34 brake dics from Audi RS4 B7. Suitable for following vehicles: VW T5 bus, front axle VW T6 bus, front axle Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: Brake discs from the Audi RS4 B7 365x34 mm part number: 8E0615301AB high 46,5mm brake caliper: Audi RS4 B7 8-piston Brembo (20767502) , reference left 8E0615107 / 3D0615107A , reference right 8E0615108 / 3D0615108A PCD and hub bore hole have to be modified Lieferumfang: 2x brake caliper adapters high-strength mounting screws material certificate

€218.99*

VW Polo 9N Audi S3 335x22 Brake Caliper Adapter Rear Axle

Brake caliper adapter, rear axle, for Polo 9N to convert the 335x22 mm Phaeton brake discs, combined with the original R32 / S3 brake calipers. Suitable for the following vehicles (only 4WD: Polo 9N Advantages of this brake system: high deceleration thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: Audi S3 8L or VW Golf R32 brake disc: internally vented VW Phaeton 335x22mm , reference 4E0615601L (modification of the PCD 5x112 to 5x100 is necessary. This can be modified by us at an avarage price of 59.- € per disc set Delivery: 2x brake caliper adapters high strength mounting screws (10.9) material certificate

€219.00*

VW Golf 4 R32 Audi S3 Polo VW Polo 6R WRC 335x22 brake disc brake caliper adapter rear axle

Brake caliper adapter, rear axle, for the models Golf R32 Audi S3 to install the Phaeton brake dics 335x22 mm, combined with the original caliper R32 / S3 Suitable for the following vehicles (4WD only): VW Golf 4 R32 Audi S3 Audi TT quattro 8N VW Bora 4 Motion VW Polo 6R WRC Seat Leon Advantages of this brake system: High deceleration Thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles Directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling. Required components: internally vented brake discs 335x22 of VW Phaeton, reference: 3D0 615 601 D (the 5x112 PCD must be modified to 5x100, what we can do ourselves in our workshops) rear axle brake caliper with bracket from Audi S3 8L or VW Golf R32 on the handbrake cable, some of the sheathing must be removed in front of the wishbone, then you can pull the cable in a little further Delivery: 2x brake caliper adapters, VW Golf MK4 R32 Audi S3 complete screw kit (10.9) copy of vehicle documents to simplify the registration material certificate

€167.84*

Opel Kadett Astra Omega Porsche Brake calipers Adapter Brake system Brake caliper adapter for front axle

Brake caliper adapter to use Porsche 6-piston calipers from the Porsche Cayenne (18 inch) part number 955.351.421 / 955.351.422, in conjunction with the brake discs from the A8 A6 S8 with the dimensions 347x30 part no. 4F2 4F5 PR 1ZL these only have to be attached to the centering can be adjusted. Perfect fit for all Omega A B. With wheel hub conversion to 5x110 bolt circle on all Opel models e.g. Astra, Calibra, Kadett & Vectra struts to mount. Relatively low conversion effort for enormous braking power Advantages: Extreme deceleration values also in connection with our rear axle brake system The material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles Directly suitable for the above models and can therefore be restored to the original condition at any time without any problems Our EPYTEC brake caliper adapters do not require your standard parts to be sent in, no re-welding - re-milling or re-drilling. tipps und tricks: The Audi brake disc fits despite the different bolt circle of 5x112 because there are M14 holes in the brake disc. The brake disc only has to be turned to the centering diameter from 68mm (Audi) to 70mm (Opel). This means the disc is perfectly centered 8can also be done in-house. Info: The pre-facelift wheel hubs are larger in diameter than the facelift wheel hubs, so they either have to be turned off in the outer diameter or the facelift wheel hubs with wheel bearings must simply be used. The included bushings are optional because there were two different axle types, but in most cases they are not required. Scope of delivery: 2 x caliper adapters Set of high-strength screws materials certificate Stress analysis for better registration

€306.79*

VW Golf MK2 Syncro Golf MK3 VR6 Brake Caliper Adapter Golf MK4 Hub Conversion Porsche R32 Syncro 310x22

Brake caliper adapter to modify the rear axle from Golf MK3 VR6, combined with the Golf MK4 wheel hub.The conversion is combined with the 310x22 mm brake discs from VW Phaeton. The Porsche calipers are connected to the hydraulics of the vehicle and can thus develop an enormous braking force. Since these have no handbrake functions, the rear Audi S3 or Golf 4 R32 is also used as a hand brake caliper adapter. The hydraulic connection is thereby closed with a blind plug / closure cap, thus this serves only as a hand brake caliper. Suitable for the following VW und Seat models (4WD): VW Golf MK3 Syncro VR6 VW Golf MK2 Syncro VW Jetta II Syncro VW Passat Syncro Advantages of this brake system: top deceleration, without comparison with conventional brake discs better performance supplied material certificate Required components: brake caliper: VW Golf R32 V6 or S3 caliper. Left VW reference 8N0615423C, right VW reference 8N0615424C brake caliper support / bracket. Reference : 8N0615425B Porsche brake caliper reference: 996.352.421 + 996.352.422 brake disc: 310x22 rear from VW Phaeton The bolt circle of the disc must be re-drilled 5x100. The re-drilling we also offer you with pleasure (click here) Delivery: 2x brake caliper adapters for Porsche caliper 2x brake caliper adaper for R32 / S3 hand brake caliper 2x centric rings high strength mounting screws material certificate

€599.71*

VW T4 Bus Audi TT TTRS RS3 Audi TT Brake Caliper Adapter 345x30 Brake Disc

Brake caliper adapter, front axle, for VW T4 bus, to convert to TTRS brake calipers, combined with the Golf 5 R32 brake discs. Suitable for the following model: VW T4 Bus Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: original TTRS , reference left 8J0 615 107 , right 8J0 615 108 brake disc: Golf MK5 R32 345x30mm , reference J0615301F ( brake pads: reference 8J0 698 151 bore hole of brakce disc muss be modified to Ø=68mm minimal hub Ø=139mm . Delivery: 2x brake caliper adapters for VW T4 Bus. Conversion to TTRS high-strength mounting screws material certificate

€204.15*

VW Golf 4 Polo 9N Bora VW Polo 6r WRC Audi A3 TT TTRS RS3 Audi TT brake system brake caliper adapter 370x32

Brake caliper adapter, front axle, for Golf MK4 serie to convert to TTRS brake calipers, combined with the original TTRS brake discs. Suitable for following vehicles: Audi A3 (8L) Audi TT (8N) VW Golf MK4 VW Bora VW Beetle VW Polo (9N) VW Polo 6r WRC Seat Ibiza Seat Leon As the TTRS disc could touch the wishbone because of its high height, we have developed spacers of 8mm thickness, which are mounted under the brake disc. The discs are thus pushed outwards. In addition, the disc with the plate is perfectly centered on the axle stub. The spacers are naturally contained in the delivery. Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: original TTRS , reference left 8J0 615 107 Bremssattel , reference right 8J0 615 108 brake pads: reference 8J0 698 151 E brake disc: TTRS 370x32 mm , reference 8J0615301F (RS3 not suitable) modification of the disc PCD from 5x112 to 5x100 (possibility of making it directly from EPYTEC) Delivery: 2x brake caliper adapters 2x spacers under discs scews high-strenghen material certificate

€314.09*

VW Golf MK4 1.8 T Leon Cupra R Jubi GTI Adapter S3 R32 Brake Caliper Adapter

Brake caliper adapter for Golf MK4, rear axle, to install the brake caliper of R32 / S3, combined with the brake disc 310x22 mm Phaeton. Suitable for following vehicles (only front-wheel drive): VW Golf 4 1.8T 180 PS Jubi GTI VW Golf 4 2,3L 170 PS VW Polo 6r WRC Audi TT 8N Audi A1 Seat Leon Cupra R 1.8T 209 PS Seat Leon Cupra R 1.8T 225 PS. Advantages of this brake system: high deceleration thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: internally vented brake discs 310x22 from VW Phaeton, reference: 3D0 615 601 D (PCD 5x112 must be modified to 5x100, which can also be made in our house) brake caliper and brake pads from R32 / S3 part number: 1J0 615 425 D brake support left Bora 1,8t 180HP Golf MK4 jubinot S3/4WDpart numbre: 1J0 615 426 D brake support right Bora 1,8t 180HP Golf MK4 jubinot S3/4WD The adapters are supplied black galvanized, best rust protection and super optics! Delivery: 2x brake caliper adapters VW Golf MK4 Seat Leon Cupra R complete mounting screws set (10.9) material certificate Stress analysis / FEM calculation for entry

€157.09*

VW T5 T6 Bus Audi TTRS Brake Caliper Adapter 348x30 Brake Disc BMW E70

Brake caliper adapter, front axle, for VW T5 Bus to convert to TTRS brake calipers, combined with the 348x30 brake discs of BMW E70. Suitable for the following vehicles: VW T5 Bus, front axle VW T6 Bus, front axle Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles. directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling. Required components: brake caliper: original TTRS , reference left 8J0 615 107 + right 8J0 615 108 brake pads : reference 8J0 698 151 E / EBC reference: DP1908 brake disc: BMW E70 348x30mm , reference 34 11 6 771 986 / EBC reference: USR1521 hub bore holes have to be modified ∅=76 mm (you will also get exactly a brake disc in our shop) Delivery: 2x brake caliper adapters high-strength mounting screws material certificate

€448.18*

VW Golf 4 VW Polo 6r WRC Bora 1.8T Polo Audi A3 adapter Porsche brake caliper rear axle

Brake caliper adapter to convert the rear axle from all 4WD Golf MK4 Bora Vento Audi A3, etc. to Porsche umzubauen. The conversion is combined with the 310x22 mm brake discs from VW Phaeton rear. The Porsche calipers are connected to the hydraulics of the vehicle and can thus develop an enormous braking force. Since these have no handbrake functions, the rear Audi S3 or Golf 4 R32 is also used as a hand brake caliper adapter. The hydraulic connection is thereby closed with a blind plug / closure cap, thus this serves only as a hand brake caliper. With the plates, the track widens by 15mm per side. Suitable for the following VW and Seat models (4WD): Audi A3 8L Audi TT 8N Seat Leon Seat Toledo 1M2 Skoda Octavia 1U VW Golf MK4 VW Bora/Jetta MK4 Polo 6R WRC Advantages of this brake system: top deceleration, without comparison with conventional brake discs better performance supplied material certificate Required components: brake caliper: Porsche reference 996.352.421 + 996.352.422 rear axle, brake caliper with support / bracket from Audi S3 8L or VW Golf R32 brake disc: 310x22 rear from VW Phaeton (must be re-drilled to 5x100, can also be done by us.) Delivery: 2x brake caliper adapters for Porsche caliper 2x brake caliper adaper for R32 / S3 hand brake caliper 2x spacers / track plates under brake discs 4x steel braided brake lines high strength mounting screws material certificate stress analysis

€515.81*

Bremssattel Adapter Audi A4 S4 C6 TTRS Bremssättel TTRS Bremsscheiben 370x32.

Bremssattel Adapter für den Audi S4 C6 auf die TTRS Bremssättel in Verbindung mit den TTRS Bremsscheiben 370x32. Die Adapter passen für folgende Fahrzeuge : Audi S4 C6 Audi A4 C6 Vorteile dieser Bremsanlage: extreme Verzögerungswerte auch in Verbindung mit unserer Hinterachsbremsanlage durch das im Lieferumfang enthaltene Materialzertifikat kann eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werden direkt passend an die oben genannten Modelle und daher jederzeit problemlos wieder in den Originalzustand rückrüstbar unsere EPYTEC Bremssattel Adapter erfordern keine Einsendung von Euren Serienteilen, kein Umschweißen, Umfräsen oder Umbohren. Benötigte Komponenten: Original TTRS Bremssättel Bremssattel links Teile Nr: 8J0 615 107 Bremssattel rechts Teile Nr: 8J0 615 108 Satz Bremsbeläge Teile Nr: 8J0 698 151 E Bremsscheiben vom TTRS 370x32 mm Teilenummer 8J0615301F (RS3 Scheiben passen nicht, andere Topftiefe) Die Nabenbohrung der Bremsscheibe muss auf 68mm augedreht werden. ( auch bei uns im Haus machbar ) Lieferumfang: 2x Bremssatteladapter für den Audi A4 S4 C6 Materialzertifikat KFZ Schein mit Eintragung es sollten mindesten 18 Zoll Felgen gefahren werden.

€269.00*

Brake Caliper Adapter Golf MK1 Rear Axle to 310x22 Phaeton Golf MK4 R32 Caliper

Brake caliper adapter, rear axle, for the mentioned below models to install the Phaeton brake dics 310x22 mm, combined with the original R32 / S3 caliper Suitable for the following vehicles (front WD only): VW Golf MK1 VW Gol MK1 Cabrio Caddy 14d Jetta 1 Golf 2 3 + GTI+ VR6 Corrado Jetta Passat 35i Scirrocco Vento Polo 6N1 Seat Cordoba Seat Ibiza Seat Toledo Advantages of this brake system: High deceleration Thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles Directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling. Required components: internally vented brake discs 335x22 of VW Phaeton, reference: 3D0 615 601 D (the 5x112 PCD must be modified to 5x100, what we can do ourselves in our workshops) brake caliper and brake from R32 / S3 The adapters are delivered black galvanized, therefore best rust protection and great look! Delivery: 2x brake caliper adapters VW Golf MK1 MK2 MK3 Caddy Scirocco Jetta VR6, etc 2x axle stubs, left and right 2x wheel hubs 4x100 or 5x100 PCD 2x suitable centric rings complete screw kit (10.9) material certificate

€286.48*

Details

VW Golf Scirocco Corrado VR6 16V Adapter S3 R32 Brake Brake Caliper

Brake caliper adapter with special wheel hubs to drive the rear brake calipers from Golf 4 V6/R32 Audi S3 8L My.99 in combination with the front 280mm VR6 or G60 brake discs on the rear axle. Suitable for the following VW and Seat models: Golf 1 (only in combination with our Axle Stud -Article No. 313) Golf 2 3 + GTI+ VR6 Corrado Jetta Passat 35i Scirrocco Vento Polo 6N1 Seat Cordoba Seat Ibiza Seat Toledo Technic: With the use of our wheel hub (available in 4 and 5 holes depending on the model) the 280mm brake discs are centred and bolted on.the track becomes wider by approx. 6-8mm per side. The wheel hubs are identical to the original wheel hubs on the inside, so the original wheel bearings can be used. There are 2 different installation positions of the brake caliper adapter, depending on which brake disc is installed. Advantages of this brake system: Top deceleration values, no comparison to the conventional rear brake discs. a musthave for performance upgrades Material certificate is supplied Low-priced spare parts procurement The material certificate included in the scope of delivery enables registration by individual acceptance even for series production cars. With our EPYTEC wheel hubs the original rear Golf 2 3 wheel bearings can still be driven. Suitable for the front axle we offer caliper adapters for a conversion to the Porsche brake system in connection with the R32 brake disc. Look in our shop. Required components: Brake caliper left VW part number 8N0615423C, Brake caliper right VW part number 8N0615424C, brake caliper holder VW part number 8N0 615 425 B or painted blue from R32: 1J0 615 425 F. Brake disc: if 5 hole is used: Golf 3 VR6 brake disc 280x22mm VW part number 1H0615301A pot depth 29mm if 4 hole is used: Golf 2 G60 brake disc 280x22mm VW part number 535615301 pot depth 40mm Scope of delivery: 2 pieces brake caliper adapter 2 pieces wheel hubs for mounting the brake discs Material certificate Stress analysis / FEM calculation for registration

€223.96*

Details

VW Golf 4 Polo 9N VW Polo 6r WRC Bora Audi A3 TT TTRS RS3 Audi TT Brake Caliper Adapter 370x32 Disc

Brake caliper adapter for Golf 4 series, front axle, to install the brake caliper of Cayenne ZR18, combined with the original brake disc of TTRS. Suitable for following vehicles: Audi A3 (8L) Audi TT (8N) VW Golf MK4 VW Bora VW Beetle VW Polo 6R WRC Seat Ibiza Seat Leon As the TTRS disc could touch the wishbone because of its high height, we have developed spacers of 8mm thickness, which are mounted under the brake disc. The discs are thus pushed outwards. In addition, the disc with the plate is perfectly centered on the axle stub. The spacers are naturally contained in the delivery. Important!: The adapter is only suitable for cast wishbones OE: 8N0 407 151 A. These are installed as standard in the Golf 4 R32, Audi S3 8L, and Audi TT 8N 1.8T and the Quattro models. All other models of the Golf 4, Audi A3 series must be converted to this cast wishbone, otherwise no more steering is possible. Article APA100 The stabilizer OE: 1J0411305AF must also be converted in vehicles that do not have the cast wishbone installed as standard. We have the right wishbones in the matching accessories and can be ordered directly. The problem with the wishbone only affects conversions to Z18 and Z17 calipers. With all other adapters that we still have, such as conversion to 4-piston Porsche Boxter, Audi TTRS or 6-piston Porsche Panamera brake calipers for the Golf 4 Audi A3 series, the adapters fit with all wishbones. Advantages of this brake system: high deceleration thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake calipers Porsche Cayenne ZR18 ZL18 , reference 95535142153 / 95535142253 brake pads: we recommend to use the pads from the ZR 17 brake calipers brake discs TTRS 370x32 mm , reference 8J0615301F (The RS3 disks are not suitable, it is another depth) adapters are suitable only with the original ball joints. modification of the disc PCD from 5x112 to 5x100 (possibility of making it directly from EPYTEC) At least 19 inch rims must be used Delivery: 2x brake caliper adapters 2x spacers under discs high-strength mounting screws copy of vehicle documents material certificate Template to check whether the brake system fits under your rim stress analysis

€196.73*

VW Golf 4 R32 Polo VW Polo 6r WRC Audi S3 adapter brake caliper adapter rear axle 310x22 brake disc

Brake caliper adapter, rear axle, for the models Golf R32 Audi S3 to install the Phaeton brake dics 310x22 mm, combined with the original caliper R32 / S3 Fits the following vehicles (4WD only): VW Golf 4 R32 VW Polo 6R WRC Audi S3 (8L) Audi TT 8N Seat Leon Advantages of this brake system: High deceleration Thanks to the material certificate supplied with the order, it is possible to approve your purchase even for series vehicles Directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling. Required components: internally vented brake disc 310x22 of VW Phaeton, reference: 3D0 615 601 D (the 5x112 PCD must be modificated to 5x100, what we can do ourselves in our workshops) rear axle brake caliper with bracket from Audi S3 8L or VW Golf R32 Delivery: 2x brake caliper adapters VW Golf 4 R32 Audi S3 2x centering rings for brake discs complete screw kit (10.9) material certificate Stress analysis for the adapter

€147.12*

VW Golf 4 Polo Bora Audi A3 TT Audi RS4 B5 Brake Caliper Adapter 360x32 Brake Disc

Brake caliper adapter on models Golf MK4 for conversion to Cayenne ZR18 brake caliper, combined with the original Audi RS4 B5 brake discs. Suitable for the following vehicles: Audi A3 (8L) Audi TT (8N) VW Golf 4 VW Bora VW Beetle VW Polo (6R) Seat Ibiza Seat Leon As the TTRS disc could touch the wishbone because of its high height, we have developed spacers of 8mm thickness, which are mounted under the brake disc. The discs are thus pushed outwards. In addition, the disc with the plate is perfectly centered on the axle stub. The spacers are naturally contained in the delivery. Important!: The adapter is only suitable for cast wishbones OE: 8N0 407 151 A. These are installed as standard in the Golf 4 R32, Audi S3 8L, and Audi TT 8N 1.8T and the Quattro models. All other models of the Golf 4, Audi A3 series must be converted to this cast wishbone, otherwise no more steering is possible. The stabilizer OE: 1J0411305AF must also be converted in vehicles that do not have the cast wishbone installed as standard. We have the right wishbones in the matching accessories and can be ordered directly. The problem with the wishbone only affects conversions to Z18 and Z17 calipers. With all other adapters that we still have, such as conversion to 4-piston Porsche Boxter, Audi TTRS or 6-piston Porsche Panamera brake calipers for the Golf 4 Audi A3 series, the adapters fit with all wishbones. Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: Porsche Cayenne ZR18 ZL18 , reference 95535142153 / 95535142253 brake discs: Audi RS4 B5 360x32 mm reference 8D0615302B adapters only fit with original suspension supporting joints PCD modification from 5x112 to 5x100 (also possible in-house, click here) Delivery: 2x brake caliper adapters 2x 8mm spacers under brake discs 2x centric rings high-strength mounting screws Template to check whether the brake system fits under your rim material certificate

€212.70*

VW Golf MK4 Bora 1,8T Polo Audi A3 Brake Caliper Adapter Porsche Cayenne Brake Rear Axle

Brake caliper adapter, rear axle, on all 4WD models Golf MK4 Bora Vento Audi A3, etc, for conversion to Porsche Cayenne caliper, combined with the 310x22 mm VW Phaeton brake discs, rear. The Porsche calipers are connected to the hydraulics of the vehicle and can thus develop an enormous braking force. However, these do not have handbrake functions. The rear axle of Audi S3 or Golf MK4 R32 is additionally used for a handbrake brake caliper adapter. The hydraulic connection is thereby closed with a blind plug / closure cap, thus this serves only as a hand brake caliper. Thanks to the plates, the track is 15 mn wider per side. Suitable for the following VW and Seat models (4WD): Audi A3 8L Audi TT 8N Seat Leon Seat Toledo 1M2 Skoda Octavia 1U VW Golf MK4 VW Bora/Jetta mk4 Advantages of this brake system: top deceleration, without comparison with conventional brake discs better performance supplied material certificate Required components: brake caliper: Porsche Cayenne, rear axle, reference 955.352.421 + 955.352.422 / Brembo reference left 20.7673.03 + right 20.7673.04 brake caliper mounting bracket , rear axle, Audi S3 8L or VW Golf R32 brake disc: 310x22 rear VW Phaeton (PCD of the disc have to be modified to 5x100 - service available from EPYTEC) Delivery: 2x brake caliper adapters for Porsche caliper 2x brake caliper adaper for R32 / S3 hand brake caliper 2x spacers under the discs 4x flexible braided brake lines high strength mounting screws material certificate Stress analysis / FEM calculation for entry Installation instructions (click here)

€495.68*

VW Golf Mk4 Bora 1,8T Polo Audi A3 Brake Caliper Adapter Porsche Cayenne Rear Axle

Brake caliper adapter, including wheel hubs (5x112), rear axle, on models 4WD Golf Mk4 Bora Vento Audi A3, etc., for conversion to the Porsche Cayenne brake caliper. The conversion is combined with the 330x22 mm brake discs from Audi A6, rear. The Porsche calipers are connected to the hydraulics of the vehicle and can thus develop an enormous braking force. However, these do not have handbrake functions. The rear axle of Audi S3 or Golf Mk4 R32 is additionally used for a handbrake brake caliper adapter. The hydraulic connection is thereby closed with a blind plug / closure cap, thus this serves only as a hand brake caliper. With the plates, the track widens by 15mm per side. Suitable for the following VW and Seat models (4WD): Audi A3 8L Audi TT 8N Seat Leon Seat Toledo 1M2 Skoda Octavia 1U VW Golf MK4 VW Bora / Jetta MK4 Polo 6R WRC Advantages of this brake system: top deceleration, without comparison with conventional brake discs better performance supplied material certificate the rear Cayenne calipers are very cheap to get on the market Required components: brake caliper: Porsche Cayenne , rear axle, reference 955.352.421 + 955.352.422 / Brembo reference left 20.7673.03 + right 20.7673.04 rear axle brake caliper with mounting bracket from Audi S3 8L or VW Golf R32 brake disc: 330x22 rear from Audi A6 , reference 4F0 615 601 B ( PCD must be modified to 5x100. This service could be done at EPYTEC) Delivery: 2x brake caliper adapters for Porsche caliper 2x brake caliper adapers for R32 / S3 hand brake caliper 2x spacers / spacing plates under brake discs 4x steel braided brake lines high strength mounting screws material certificate Installation instructions (click here)

€534.17*

VW Golf 2 3 Corrado Passat 35i Jetta Brake Caliper Adapter Porsche Cayenne Brake System

Brake caliper adapter for original Seat Leon Cupra R 323er brake discs, combined with 4-piston Porsche Cayenne Brembo calipers. Suitable for all VW with PCD 4x100mm on the front axle: VW Golf MK2 and MK3 Seat Ibiza Cupra R VW Passat VW Corrado VW Jetta VW Polo Seat Toledo Required components: brake caliper: Porsche Cayenne (rear axle), reference 955.352.421 + 955.352.422/ Brembo reference left 20.7673.03 + right 20.7673.04 brake pads: from original calipers 955.352.421 + 955.352.422 brake disc: Seat Leon Cupra R 323x28, reference 1ML 615 301 brake disc PCD must be modified to 4x100, which can also be made in our factory Advantages of this brake system: top deceleration, without comparison with conventional brake discs better engine performance suitable for 17 inch rims components come from the production series of VW registration is possible if correct assembly including set of mounting screws Delivery: 2x brake caliper adapters, galvanized (see picture) set of high-strength mounting screws material certificate Stress analysis

€155.57*

VW Golf MK4 Bora 1,8T Polo VW Polo 6r WRC Audi A3 Adapter Porsche Cayenne Brake Caliper Rear Axle

Brake caliper adapter, rear axle, in all 4WD Golf MK4 Bora Vento Audi A3, etc. for conversion to Porsche Cayenne brake calipers, combined with the 310x22 mm VW Phaeton brake discs, rear. The Porsche calipers are connected to the hydraulics of the vehicle and can thus develop an enormous braking force. Since these have no handbrake functions, the rear Audi S3 or Golf MK4 R32 is also used as a hand brake caliper adapter. The hydraulic connection is thereby closed with a blind plug / closure cap, thus this serves only as a hand brake caliper. With this adapters, the tracking is wider per side by about 10mm. Suitable for the following VW und Seat models: Audi A3 8L Audi A1 Audi TT 8N Seat Leon Seat Toledo 1M2 Skoda Octavia 1U VW Golf mk4 VW Bora/Jetta mk4 Polo 6R WRC Advantages of this brake system: top deceleration, without comparison with conventional brake discs better performance supplied material certificate Required components: brake caliper: Porsche Cayenne , rear axle, reference 955.352.421 + 955.352.422 / Brembo reference left 20.7673.03 + right 20.7673.04 brake caliper mounting bracket: Audi S3 8L or VW Golf R32, rear brake disc: 310x22 , rear, VW Phaeton the caliper mounting brackets of the hand brake caliper should be slightly filed on the outer edge so that the disc rotates freely Delivery: 2x brake caliper adapters for Porsche caliper 2x brake caliper adapers for R32 / S3 hand brake caliper suitable steel braided brake lines 2x centric rings high-strength mounting screws material certificate Stress analysis / FEM calculation for entry Installation instructions (click here)

€554.80*

VW Polo R WRC Adapter Porsche Cayenne Brake Brake Caliper Rear Axle

Brake caliper adapters, rear axle, on models Polo R WRC, for conversion to the Porsche Cayenne brake system. Combined with the 310x22 mm brake discs from VW Phaeton, rear. The Porsche calipers are connected to the hydraulics of the vehicle and can thus develop an enormous braking force. Since these have no handbrake functions, the original brake caliper is also used as a hand brake caliper adapter. The hydraulic connection is thereby closed with a blind plug / closure cap, thus this serves only as a hand brake caliper.l. The track is wider by about 10mm per side due to the plates. Adapters are suitable for VW Polo R WRC Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system better performance supplied material certificate Required components: brake caliper: Porsche Cayenne, rear, reference 955.352.421 + 955.352.422 / reference Brembo 20.7673.03 + 20.7673.04 original calipers from the WRC are used as handbrakes. brake caliper mounting bracket: Golf 4 R32 or Audi S3 8L brake disc: 310x22, rear, VW Phaeton (must be re-drilled to 5x100, can also be done by us.) Delivery: 2x brake caliper adapters for the Porsche caliper 2x brake caliper adapters for the adaption R32 / S3 handbrake caliper 2x spacers under brake discs 2x centering extension rim centering 4x steel braided brake lines high strength mounting screws material certificate

€506.67*

VW Golf MK2 MK3 VR6 Syncro Brake Caliper Adapter 4-piston Porsche Cayenne brake Caliper 310x22 Phaeton Brake Disc

Brake caliper adapter, rear axle, on models Golf 2 3 VR6 Syncro for conversion to the Porsche Cayenne brake calipers, combined with the 310x22 mm brake discs from VW Phaeton, rear. The Porsche calipers are connected to the hydraulics of the vehicle and can thus develop an enormous braking force. However, these do not have handbrake functions. The rear axle of Golf 4 R32 / Audi S3 is additionally used for a handbrake brake caliper adapter. The hydraulic connection is thereby closed with a blind plug / closure cap, thus this serves only as a hand brake caliper. Suitable for the following VW und Seat models (4WD): VW Golf 2 Syncro VW Golf 3 Syncro Advantages of this brake system: top deceleration, without comparison with conventional brake discs better performance supplied material certificate Required components: brake caliper: Porsche Cayenne, rear axle, reference 955.352.421 + 955.352.422 / Brembo referecne: 20.7673.03 brake caliper mountin bracker: Audi S3 8L or VW Golf R32, rear axle brake disc: 310x22 rear VW Phaeton, referecne: 3D0 615 601 D the bolt circle / PCD of the disc have to be modified (service available from EPYTEC) the caliper mounting brackets of the hand brake caliper should be slightly filed on the outer edge so that the disc rotates freely Delivery: 2x brake caliper adapters for Porsche Cayenne caliper 2x brake caliper adapers for Golf 4 R32 / Audi S3 hand brake caliper 2x centric rings high-strength mounting screws material certificate Stress analysis / FEM calculation for entry Installation instructions (click here)

€384.56*

Germany	€0.00
United Kingdom	€20.60
Italy	€15.84
Spain	€15.84
Andorra	€15.84
Gibraltar	€15.84
Hungary	€15.84
Sweden	€15.84
Slovenia	€15.84
Slovakia	€15.84
San Marino	€15.84

Brake Discs Pitch Circle Diameter Drilling Hub Bore Hole Custome-Made - Additional Modification of the Hub Bore: No

Procedure and scope of delivery:

Brake Discs Pitch Circle Diameter Drilling Hub Bore Hole Custome-Made - Additional Modification of the Hub Bore: No

Procedure and scope of delivery:

Login