Bolt circle adapter VW 4x100 on 5x112 Mercedes 20mm Wheel plates
- ✓ 4x100 to 5x112
- ✓ 20mm per side
- ✓ 57.1 -> 66.6 centering
£115.37*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
High resistant bolt circle adapter.Tailor-made for all VW with 4x100mm bolt circle and centering hole of 57,1mm.
Fits for any kind of Mercedes wheel rim with 5x112mm fixaton.
- Enlargement on each wheel : 20mm
- Enlargement of lane on axle : 40mm
- Mesure inner centering on bolt circle VW : 57,1mm
- Mesure outer centering on bolt circle Mercedes : 66,6mm
- Thread in adapter plate for wheel bolts: M12 x 1.5
All our delivered pieces are made in high quality alluminum and steel alloy and all screws supplied are high-strength (10.9).
Technical information for installation:
Fix the delivered adapter with 3 screws on the wheel hub.The eccentric has to be fixed in the 4th hole and then adjusted in the right position to adapt it on bolt circle. To finish fix the wheel rim with the 5 screws.This will give stability to the whole installation.
In the installation instructions, you see how the whole thing is mounted. (click here)
With the TÜV certificate (technical report) included in the scope of delivery, an entry can be made for individual acceptance of series vehicles.
Scope of delivery:
- 2x high resistant adapter for bolt circle conversion on one axle
- 2x high resistant eccentric
- 1x complet high resistant screw kit 10.9
- TÜV - certificate for registration
- Installation instructions
All our delivered pieces are made in high quality alluminum and steel alloy.You will receive bolt circle adapters for one axle. If you want your vehicle to be fully equipped, please buy the item twice. Please find in our shop the same product with thickness 25mm.
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
29 January 2019 18:21
rolfsteuer
Alles bestens, Danke.
26 March 2017 22:46
riemchen09
Einfach perfekt!alles super gelaufen
14 August 2018 10:34
Johann Müller D
Super schneller Versand, Produkt passt zu 100%. Klare weiterempfehlung, immer wieder gerne....
16 March 2020 18:52
cap.-chaos
Top Ware und schneller Versand! Gerne wieder!
30 December 2016 07:11
deanandleanne
Great item, as described and arrived promptly. Thanks.
3 June 2019 11:27
claudia.r1988
Alles bestens. Top Ebayer. Gerne wieder
4 September 2016 19:42
gaalliance
5 Stars for super Service and Quality
30 May 2019 14:23
dries.kevin
Alles Top. Gerne wieder !!!
28 October 2017 20:39
borstel-ostharz
Schnelle Lieferung und guter Kontakt
10 August 2016 09:48
holla-die-waldwurst
echt weiterzuempfehlen, schnell, zuverlässig, einfach gut
- How often do I have to pay the express surcharge if I have several products in one order or place several orders?
You only have to pay the express surcharge once per order. However, if you complete the order and place a new order, an express surcharge will apply again. The express surcharge therefore applies per order, not per product.
- With which torque are our Epytec bolt circle adapters screwed tight?
To attach the bolt circle adapters to the wheel hub, the same torque is used as original, this is usually between 120 and 140NM.
If you are not sure, it must be asked at the vehicle manufacturer.
The rim is always attached to the bolt circle adapter with the torque that the rim manufacturer specifies. There is a data sheet for each rim, which specifies the tightening torque.
If the data sheet is no longer available, the values must be requested from the rim manufacturer.