VW T5 T6 Bus brake calliper adapter 390x36mm brake disc Mercedes GL 6-piston W204 AMG brake calliper
€309.59*
- Einfache TÜV Eintragung
- Qualität Made in Germany
- Faire Preise ohne Zwischenhandel, du kaufst direkt beim Hersteller und Enwickler des Produktes
- Weltweit Nr 1 in Sachen Tuning Adapter
- 15 Jahre Expertenwissen
- 10 Jahre Garantie
Brake caliper adapter for the VW T5 T6 bus series to the Mercedes AMG 6-piston brake calipers in conjunction with the brake discs 390x36mm from the Mercedes GL.
The adapters are suitable for the following vehicles:
- VW T5 Bus
- VW T6 Bus
Advantages of this brake system:
extreme deceleration values also in conjunction with our rear axle brake system
The material certificate included in the scope of delivery enables registration via individual approval, even for standard vehicles
Fits directly to the above-mentioned models and can therefore be easily retrofitted to the original condition at any time
our EPYTEC brake calliper adapters do not require your standard parts to be sent in, no rewelding, re-milling or re-drilling.
Required components:
- Mercedes W204 AMG 6-piston brake callipers part number: A4634205100 / A4634205200 ; Brembo number: 20.9553.01 / 20.9553.02
- Brake pads, part number: A0074206520
- Brake discs from Mercedes Benz GL 390x36mm part number: 166 421 0512
- The bolt circle must be 5x120 and the hub bore must be 76.00mm (can be done in-house for 149€ for the pair of brake discs click here)
Scope of delivery:
- 2x brake calliper adapter for VW T5 T6 Bus
- 2x track plate 5mm between brake disc and rim
- high-strength screw material
- material certificate
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ Registration-free
- ✓ Redstuff ceramic covering
- ✓ temperature up to 750°C
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ 390x36
- ✓ 67mm centering
- ✓ 54.5mm height
- ✓ brake disc / pitch circle diameter (PCD) drilling / modification / custome-made hub bore hole
- ✓ additional 2nd hole circle / pitch circle drilled in the brake disc
