VW T4 Bus Audi TT TTRS RS3 Audi TT Brake Caliper Adapter 345x30 Brake Disc
- ✓ 345x30 1K0615301AB Golf 5 R32 brake disc
- ✓ 4-piston 8J0615107 / 8J0615108 TTRS brake caliper
- ✓ front axle
€204.15*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter, front axle, for VW T4 bus, to convert to TTRS brake calipers, combined with the Golf 5 R32 brake discs.
Suitable for the following model:
- VW T4 Bus
Advantages of this brake system:
- high deceleration, also in conjunction with our rear axle braking system
- thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles
- directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems
- Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling
Required components:
- brake caliper: original TTRS , reference left 8J0 615 107 , right 8J0 615 108
- brake disc: Golf MK5 R32 345x30mm , reference J0615301F (
- brake pads: reference 8J0 698 151
- bore hole of brakce disc muss be modified to Ø=68mm
- minimal hub Ø=139mm .
Delivery:
- 2x brake caliper adapters for VW T4 Bus. Conversion to TTRS
- high-strength mounting screws
- material certificate
Tips, information and hints:
- For a better ventilation of the brake system, we recommend removing the dust cover plates and brake anchor plates.
- We can generally not answer, which rim size you can mount after your brake conversion. There are simply too many different rims.
- In rare cases it is possible that the rims touch minimal the brake caliper, then you can simply use spacers.
>> Now directly to spacers << - Install the adapter with the necessary components and then check if new brake lines are required. Because, depending on the vehicle, the lines may be too short or the line tips may not suitable. We advise you to change to steel braided brake line because of the quality and technical advantage. Specifically for this, we have developed an online brake line configurator, where you can assemble the type of steel braided brake lines you want. Click here to go to the configurator
>> Configure steel braided brake lines <<
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
26 November 2019 08:07
Re-Suspension H
Ich habe die Adapter leider aus Zeitgründen noch nicht einbauen können. Was ich aber sagen kann: die Fertigungsqualität ist hervorragend, das Oberflächenfinish ebenfalls Die galvanisierte Oberfläche macht einen sehr wertigen Eindruck. Erfreulich ist auch, daß alle nötigen Schrauben dabei sind. Die angegebene Lieferzeit hat gestimmt, ich empfehle das Produkt ausdrücklich weiter und würde es wieder kaufen.
8 May 2021 09:57
Riccardo F
Sieht super aus und ist passgenau wird nächste woche montiert. Gruß
22 May 2021 10:37
Riccardo F
Hallo, ich bin sehr zufrieden mit den Adaptern Alles passt sehr gut.
13 June 2018 16:36
Christoph B
Die von euch empfohlenen Bremsscheiben haben nicht auf die Narbe gepasst musste die narbe um 2mm im Durchmesser abdrehen und den zentrierrand um 3mm an der Bremsscheibe ausdrehen . der Warnkontakt der Bremsverschleißanzeige hat einen anderen stecker, sonst hat alles super gepasst.
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: