VW T3 4-wheel Syncro BUS conversion to Porsche brake caliper adapter brake system brake caliper adapter
- ✓ 288x25 4A0615301C 4A0615301D 4A0615301E 8E0615301Q Audi A6 / A4 brake disc
- ✓ 4-piston 996352421 / 996352422 brake caliper
- ✓ front axle
€211.48*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter for front axle brake system for T3 14 Zoll Syncro to fix brake discs typ Audi A4 A6 diameter 288x25mm in combination with Porsche 996 4 Piston brake calipers.
The advantages of this brake system are the perfect deceleration values. Furthermore, the price-performance ratio of the Porsche brake calipers and the brake discs is right.
Required components:
- rear Porsche 996 brake calipers Porsche part number 996.352.421 + 996.352.422 (Only 100% suitable with the specified Porsche calipers)
- Brake discs Audi A6 A4 288x25 OE numbers: 4A0 615 301 C (VAG), 4A0 615 301 D (VAG), 4A0 615 301 E (VAG), 8E0 615 301 Q (VAG) other comparison numbers: V10-80049 (VAICO ), 100.1216.20 (ZIMMERMANN), 100.1216.70 (ZIMMERMANN)
This brake disc system allows the installation of 15” wheel rims.
Click here for the matching adapter for the 16 inch axle article 1143 (click here)
Advantages:
- The remaining fading on the original brake system is gone.
- Significantly better perfomance than the standard brake system.
- Our adaptors do require only small rectifications on your vehicle.Therefore easily transformable in its original condition
- The registration for public road use should be no problem with correct and complete execution of the work.
Scope of delivery:
- 2 brake adapter (see photo)
- Certificate of material (Proves the conformity of our product in Germany and simplifies authorization by authorities)
- High resistant screws for fixation
- Stress analysis
Tips, information and hints:
- For a better ventilation of the brake system, we recommend removing the dust cover plates and brake anchor plates.
- We can generally not answer, which rim size you can mount after your brake conversion. There are simply too many different rims.
- In rare cases it is possible that the rims touch minimal the brake caliper, then you can simply use spacers.
>> Now directly to spacers << - Install the adapter with the necessary components and then check if new brake lines are required. Because, depending on the vehicle, the lines may be too short or the line tips may not suitable. We advise you to change to steel braided brake line because of the quality and technical advantage. Specifically for this, we have developed an online brake line configurator, where you can assemble the type of steel braided brake lines you want. Click here to go to the configurator
>> Configure steel braided brake lines <<
Login
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ Length: 57cm
- ✓ M10x1 curved on the outside
- ✓ M10x1 straight on the inside
- ✓ Registration-free
- ✓ Redstuff ceramic covering
- ✓ temperature up to 750°C
- ✓ 288x25
- ✓ 68mm centering
- ✓ 46.5mm height
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ optimized paste for brake systems
- ✓ correct viscosity
- ✓ no squeaking
- ✓ Racing brake fluid
- ✓ Reduction in brake fading
- ✓ improved pedal feel
- ✓ 288x25
- ✓ 68mm centering
- ✓ 46.5mm height
- ✓ Desired dimensions
- ✓ Quickly configurable
- ✓ Length, color and connections freely selectable
- ✓ Quick assembly
- ✓ delivered ready to install
- ✓ great safety
- ✓ Significantly higher boiling point
- ✓ Better pedal feel
- ✓ Suitable for the race track
- ✓ 5x112 bolt circle
- ✓ Plug & Play
- ✓ VW T3 Bus Syncro