VW Golf 4 Bora Audi A3 TT Audi RS Q3 brake system caliper adapter 365x34
- ✓ 365x34 8U0615301A Audi RS Q3 brake disc
- ✓ 8-piston 20767502 Audi RS Q brake caliper
- ✓ front axle
€330.01*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter on Golf 4 series for conversion to Audi RS Q3 8-piston brake calipers, combined with the original Audi RS Q3 brake discs 365x34mm.
Suitable for following vehicles:
- Audi A3 (8L)
- Audi S3 (8L)
- Audi TT (8N)
- VW Golf 4
- VW Golf 4R32
- VW Bora
- VW Beetle
- Seat Leon
Advantages of this brake system:
- high deceleration, also in conjunction with our rear axle braking system
- thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles
- directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems
- Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling
Required components:
- brake caliper: Audi RS Q3 8-piston Brembo reference: 20.7675.02
- brake disc: Audi RS Q3 365x34 mm , reference 8U0.615.301A
- Adapters only fit with original supporting joints.
- modification of the disc PCD from 5x112 to 5x100 (possibility of making it directly at EPYTEC)
Delivery:
- 2x brake caliper adapters
- 2x spacers 8mm
- high-strength mounting screws
- material certificate
- License for easier registration
Tips, information and hints:
- For a better ventilation of the brake system, we recommend removing the dust cover plates and brake anchor plates.
- We can generally not answer, which rim size you can mount after your brake conversion. There are simply too many different rims.
- In rare cases it is possible that the rims touch minimal the brake caliper, then you can simply use spacers.
>> Now directly to spacers << - Install the adapter with the necessary components and then check if new brake lines are required. Because, depending on the vehicle, the lines may be too short or the line tips may not suitable. We advise you to change to steel braided brake line because of the quality and technical advantage. Specifically for this, we have developed an online brake line configurator, where you can assemble the type of steel braided brake lines you want. Click here to go to the configurator
>> Configure steel braided brake lines <<
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
13 April 2019 17:24
Fabio W
Super passgenau 🤙🏼👍🏼
7 April 2019 15:22
Fabio W
Super passgenau 👍🏼 Dass einzige dass optimiert werden könnte ist die Position des Sattels 🙈 Hab nur gutes gehört und konnte mich selbst davon überzeugen 👍🏼
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ Length: 57cm
- ✓ M10x1 curved on the outside
- ✓ M10x1 straight on the inside
- ✓ 280x22 1J0615301P Golf 4 brake disc
- ✓ 4-piston 996352421 / 996352422 Porsche brake caliper
- ✓ rear axle
- ✓ 335x22 4E0615601L VW Phaeton brake disc
- ✓ 1-piston 8N0615423C / 8N0615424C VW Golf 4 R32 / Audi S3
- ✓ rear axle
- ✓ 310x22 3D0615601D VW Phaeton brake disc
- ✓ 4-piston 996352421 / 996352422 Audi S3 8L VW Golf R32 brake caliper
- ✓ rear axle
- ✓ 310x22 3D0615601D VW Phaeton brake disc
- ✓ 1-piston 8N0615423C / 8N0615424C VW Golf 4 R32 / Audi S3 brake caliper
- ✓ rear axle
- ✓ rim centric ring / extension bush, high-strength steel, for VW Golf MK4 Polo 9N Bora Audi A3 TT
- ✓ Hole circle: 5x100 & 5x112
- ✓ Thickness: 8mm
- ✓ Centering 57.1->64.8