VW Golf 1 Caddy 14d Jetta Scirocco Brake Caliper Adapter Brake System Golf 4 5 GTI Discs 312x25
- ✓ 312x25 8N0615301A Golf 4 GTI brake disc
- ✓ 1-piston 1K0615123E / 1K0615124E Golf 5 GTI brake caliper
- ✓ front axle
€106.42*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter, front axle, for the Golf MK1 models to install the caliper of Golf 5 GTI, combined with the disc of Golf 4 GTI 312x25.
Suitable for the following vehicles:
- Golf 1
- Golf 1 Cabrio
- Jetta 1
- Caddy 14d
- Scirocco
Advantages of this brake system:
- high deceleration, also in conjunction with our rear axle braking system
- thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles
- directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems
- Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling.
Required components:
- Golf 5 GTI brake calipers , reference: 1K0.615.123.E + 1K0.615.124.E
- Brake caliper carrier from the VW Golf 5 GTI. Part number: 1K0 615 125 C
- Brake pad kit , reference: 5K0.698.151
- Golf 4 GTI brake discs , reference: 8N0.615.301.A
- in connection with our 5x100 wheel hubs (article no .: APA102)
- or the brake discs have to be re-drilled (can also be made in-house)
Delivery:
- 2x brake caliper adapters
- high-strength mounting screws
- material certificate
Tips, information and hints:
- For a better ventilation of the brake system, we recommend removing the dust cover plates and brake anchor plates.
- We can generally not answer, which rim size you can mount after your brake conversion. There are simply too many different rims.
- In rare cases it is possible that the rims touch minimal the brake caliper, then you can simply use spacers.
>> Now directly to spacers << - Install the adapter with the necessary components and then check if new brake lines are required. Because, depending on the vehicle, the lines may be too short or the line tips may not suitable. We advise you to change to steel braided brake line because of the quality and technical advantage. Specifically for this, we have developed an online brake line configurator, where you can assemble the type of steel braided brake lines you want. Click here to go to the configurator
>> Configure steel braided brake lines <<
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
25 August 2018 09:04
Carsten K
Erstmal. Der Kontakt mit Epytec ist super. Schnell, freundlich und auch auskunftsbereit Die Träger passen super. Wirkt auch stabil. Einziger Wermutstropfen. Schrauben sind unglücklich gewählt
22 March 2023 17:32
Thorben V
Sehr gute Verarbeitung gerne wieder. 100% Kaufempfehlung
31 December 2019 09:42
Josef H
absolut passgenau leichte montage für jeden zu machen jederzeit gerne wieder guten rutsch mfg josef
15 October 2023 10:37
Christian H
Passt perfekt
5 September 2020 09:19
Achim F
5 Sterne
14 July 2022 20:52
Jan willem H
Brauche ich für die umbauw fon golf 1 bremsen zür golf 5 bremsem
14 January 2020 19:07
Josef H
alles top
15 January 2020 23:44
Josef H
alles super absolut passgenau weiter so daumen hoch
15 October 2023 10:37
Christian H
Passt perfekt
21 October 2020 09:13
Bjoern M
Verarbeitung und Optik zusagend. Dennoch verbesserungsbedarf. Musste mit Unterlegscheiben das Abstandsmaß zwischen Bremsscheibe und Bremssattelhalter anpassen, sodass die Scheibe mittig läuft. Könnte mit einfacher Tasche angepasst werden. Ansonsten einfache Anwendung.
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ Desired dimensions
- ✓ Quickly configurable
- ✓ Length, color and connections freely selectable
- ✓ Racing brake fluid
- ✓ Reduction in brake fading
- ✓ improved pedal feel
- ✓ 312x25
- ✓ 65mm centering
- ✓ 34.4mm height
- ✓ 312x25
- ✓ 65mm centering
- ✓ 35mm height
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ 312x25
- ✓ 65mm centering
- ✓ 35mm height
- ✓ 312x25
- ✓ 65mm centering
- ✓ 35mm height
- ✓ Registration-free
- ✓ Blackstuff Ultimax brake pads
- ✓ temperature up to 400°C
- ✓ Registration-free
- ✓ Greenstuff sports surface
- ✓ temperature up to 650°C
- ✓ Registration-free
- ✓ Redstuff ceramic covering
- ✓ temperature up to 750°C
- ✓ optimized paste for brake systems
- ✓ correct viscosity
- ✓ no squeaking
- ✓ 5x100 bolt circle
- ✓ Plug & Play
- ✓ VW Jetta / VW Caddy / Golf 1
- ✓ 312x25
- ✓ 65mm centering
- ✓ 34.4mm height
- ✓ Significantly higher boiling point
- ✓ Better pedal feel
- ✓ Suitable for the race track
- ✓ 312x25
- ✓ 65mm centering
- ✓ 34mm height
