Thin drive shaft VW Golf 4 Bora Audi A3 Seat Leon Toledo Skoda Octavia joint set axle joint
- ✓ Front axle right
- ✓ Golf 4, Bora, Audi A3, Seat Leon, Skoda Octavia
- ✓ Registration free
€197.18*
Name | Title | Surcharge |
---|---|---|
Chassis number: |
- 30 days money back guarantee
- shipping within 24h
- 15 years expert knowledge
- 2 years warranty
10mm shorter and thinner drive shaft for many VW, Skoda and Seat models. Absolutely necessary when lowering! The shaft is made of high-strength steel, 30mm thick and manufactured in one piece and is a complete drive shaft. Thus also suitable for high-performance engines
Thanks to our thin and extremely stable transmission / drive shaft, you avoid many problems at the body that usually appear during a chassis lowering
It is important that when installing the new drive shaft, there is no overpressure in the sleeve. In our installation instructions you can see how you can prevent this (click here)
With the installation of our drive shaft, you avoid many modifications and you save time.
If you have the VW Golf MK4 Jubi, you also need the right wheel hubs so that you can install this thinner drive shaft. Article APA126 Click here
Technical data:
assembly side | front axle right |
length | 796,0 mm |
thread | M20x1.5 |
drilling-Ø | 10,2 mm |
PCD-Ø | 94 mm |
joint diameter, gear side | 108 mm |
number of drill holes | 6 |
external toothing wheel side | 36 |
chassis | for vehicles with low-profile chassis |
joint diameter wheel side | 98,0 mm |
Delivery:
- 1x fine thin drive / transmssion shaft, 1 cm shorter, inclusive axle joint, wheel hub and wheel bearing, for Golf Bora, Audi A3, Seat Leon, Toledo
Technical data:
Login
16 May 2020 07:57
Moritz Z
Sehr stabile dünne Antriebswelle! Perfekt für Tieffahrer.
9 April 2021 21:06
Max W
Perfeckte passgenauigkeit! Produkte sind Top und die Qualität auch ! Meinung zu allen drei Produkten Einfach nur Top !
24 April 2023 13:26
Daniel R
Top Qualität. Alle benötigten Schrauben dabei. Leider keine unterlegplättchen für die Schrauben Getriebeseitig dabei.
27 January 2019 13:40
Thorsten M
Es hat alles gepasst. Guter und schneller Service.
24 April 2018 21:15
Shasa J
Passgenau und das Getriebe ist nicht mehr so belastet
22 August 2019 07:14
Marc L
Sehr zufrieden mit der Welle. Passgenau !! Bei Tieferlegungen ab 50mm genau die richtige Welle, um den Stabi nicht zu berühren !!Problem gelöst. Top
6 August 2020 14:16
Dennis B
Verarbeitung könnte etwas besser sein aber im großen und ganze ein gutes Produkt vergleichsweise teuer aber ok
3 January 2019 11:04
Vanessa T
Artikel wurde schnell geliefert und entspricht den Erwartungen meines Freundes. Über das Ergebnis vom Einbau kann ich leider noch nichts sagen, da er im Moment keine Zeit zum Einbau hat. War auf jeden Fall ein gutes Weihnachtsgeschenk
- What exactly is the point of having a shorter driveshaft?
As a result of lowering, the axle geometry changes and the shaft presses against the wheel bearing, exposing it to high levels of wear and, in the worst case, destroying it. It is therefore imperative to depressurize the component. This is done by shortening the trees.
- Do reinforced driveshafts also have reinforced ball joints ?
The wheel-side ball joints are also reinforced, but the inner ball joints are like the standard ball joints.
- Why are two bags of grease included in the delivery?
The grease is included in the scope of delivery so that it can be regreased or if the gearbox flange is open at the rear. In this case, grease must still be applied there. If the shaft is supplied completely closed, no grease is required, as this has already been done.
- Why are no shims (OE: 1K0407357D) for the mounting supplied as they are original?
We do not supply the shims, as we install the latest version of the bellows. With these, the shims are no longer required.