Steel Braided Brake Line VW T5 T6 Bus Transporter Van Front Axle Brake Conversion
- ✓ Length: 30cm
- ✓ M10x1 straight outside
- ✓ M10x1 straight inside
Longer steel braided brake line / steel flexible brake hoses, including material certificate, for conversion to larger brake system with connection M10x1, suitable for 4-piston Brembo
Suitable for the following models:
- VW T5
- VW T6
- VW Golf
- etc
Advantages compared to original brake lines:
- no loss of pressure when braking. Exact pressure point
- easy assembly. The original line is simply replaced by the braided steel line
- no swelling as with rubber lines
- cost savings, because the braided steel lines do not need to be changed every 3 or 5 years
- shorter braking
- protection against the rodents
- including ABE (General Operating Permit), no registration necessary
- great optics
Technical data:
- length: 30 cm
- Connection 1 M10x1 external thread staight
- Connection 2 M10x1 internal thread straight
- 90° flanging our fittings are so-called hermaphrodites, which means that every connection fits regardless of whether concave or convex
Delivery:
- 2x steel braided brake lines VW T5 und T6 bus / transporter
- material certificate
We also manufacture custom made. In our online shop, you can find a "configurator" to compose length, color and connections according to your choice. Then order!
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
11 June 2020 08:16
Alexander S
Top Qualität, lässt sich gut verbauen. Eintragung ohne Probleme
- Does the steel braided brake line also fit other vehicles?
Yes, the brake line can be used in many other vehicles as well. Since almost all car manufacturers use the same size of thread for brake line fittings. Often the only difference is the concave or convex sealing surface. Our fittings are so-called hermaphrodite, which means that each fitting is suitable, concave (valley) and convex (mountain). All you have to do is measure the length and find out the thread size of the fitting you want for your line. So you can see if the line is suitable. You can find the exact details of the brake line in the product description under the technical data.
- There were 2 lens seals supplied with the steel faux lines. Where exactly are these installed?
the lens seals are always included with the orders. They are used to balance the cone, depending on the cone of the steel tube, see picture attached. With flare F you do not need the lens seals, with flare E they must be placed in the internal threads. The direction, which way around, does not matter.
- ✓ 330x22 4H0615601H Audi A4 A5 brake disc
- ✓ 1-piston 7H0615423 / 7H0615424 VW T5 brake caliper
- ✓ rear axle
- ✓ 330x22 4H0615601H Audi S4 A4 A5 brake disc
- ✓ 1-piston 7H0615423 / 7H0615424 VW T5 brake caliper
- ✓ rear axle
- ✓ 356x22 4H0615601F Audi A6 brake disc
- ✓ 1-piston 7H0615423 / 7H0615424 VW T5 T6 brake caliper
- ✓ rear axle
- ✓ Bore 8mm
- ✓ straight
- ✓ For welding/screwing on
- ✓ Bore 7mm
- ✓ straight
- ✓ For welding/screwing on
- ✓ Bore 11mm
- ✓ 90° bent
- ✓ for welding/screwing
- ✓ Bore 7mm
- ✓ 90° bent
- ✓ for welding/screwing
- ✓ Inner diameter 9mm
- ✓ outer diameter 25mm
- ✓ rubber ring
- ✓ Inner diameter 7.5mm
- ✓ outer diameter 24mm
- ✓ rubber ring