Right drive shaft VW Golf 1 Scirocco 1 Caddy Jetta joint set R32 VR6 axle joint
- ✓ Front axle right
- ✓ VW Golf 1, Caddy, Jetta
- ✓ VR6 or R32 conversion
€218.90*
| Name | Title | Surcharge |
|---|---|---|
| Chassis number: |
- 30 days money back guarantee
- shipping within 24h
- 15 years expert knowledge
- 2 years warranty
Right shorter and thinner drive shaft for VW Golf 1, Scirocco 1, Jetta, Caddy, and many more models to convert them to VR6 or R32 engine. Absolutely necessary when lowering! The shafts are 26mm thick, made of high-strength steel and manufactured in one piece and are a complete drive shaft.
Suitable for the following vehicles when converted to VR6 or R32 with EPYTEC motor mounts/supports:
- Golf Mk1
- Scirocco 1 (53B)
- Jetta
- Caddy
Thanks to our thin and extremely stable transmission / drive shaft, you avoid many problems at the body that usually appear during a chassis lowering
It is important that when installing the new drive shaft, there is no overpressure in the sleeve/gaiter. In our installation instructions you can see how you can prevent this (click here)
With the installation of our drive shaft, you avoid many modifications and you save time.
Delivery:
- 1x thin shorter drive shaft / solid shaft including joint kit / axle joints VW Golf 1, Scirocco 1, Jetta, Caddy, and many more models to convert them to VR6 or R32 engine
Technical data:
Login
- What exactly is the point of having a shorter driveshaft?
As a result of lowering, the axle geometry changes and the shaft presses against the wheel bearing, exposing it to high levels of wear and, in the worst case, destroying it. It is therefore imperative to depressurize the component. This is done by shortening the trees.
- Do reinforced driveshafts also have reinforced ball joints ?
The wheel-side ball joints are also reinforced, but the inner ball joints are like the standard ball joints.
- Why are two bags of grease included in the delivery?
The grease is included in the scope of delivery so that it can be regreased or if the gearbox flange is open at the rear. In this case, grease must still be applied there. If the shaft is supplied completely closed, no grease is required, as this has already been done.
- Why are no shims (OE: 1K0407357D) for the mounting supplied as they are original?
We do not supply the shims, as we install the latest version of the bellows. With these, the shims are no longer required.
| Motor | Motorcode |
|---|---|
| 1.6 | 155|75PS(55KW) |
| 1.6 | 155|72PS(53KW) |
| 1.8 | 155|90PS(66KW) |
| 1.8 | 155|98PS(72KW) |
| 1.8 | 155|111PS(82KW) |
| 1.6 | 155|110PS(81KW) |
| 1.3 | 155|54PS(40KW) |
| 1.8 | 155|112PS(82KW) |
| 1.5 | 155|70PS(51KW) |
| 1.8 | 155|95PS(70KW) |
| Motor | Motorcode |
|---|---|
| 1.3 | 16|60PS(44KW) |
| 1.6 | 16|75PS(55KW) |
| 1.5 | 16|70PS(51KW) |
| 1.6 D | 16|54PS(40KW) |
| 1.1 | 16|50PS(37KW) |
| 1.6 TD | 16|70PS(51KW) |
| 1.8 | 16|112PS(82KW) |
| 1.6 GLI | 16|110PS(81KW) |
| 1.6 | 16|85PS(63KW) |
| 1.5 D | 16|50PS(37KW) |
| Motor | Motorcode |
|---|---|
| 1.6 | 53|75PS(55KW) |
| 1.1 | 53|50PS(37KW) |
| 1.3 | 53|60PS(44KW) |
| 1.6 | 53|70PS(51KW) |
| 1.5 | 53|75PS(55KW) |
| 1.5 | 53|70PS(51KW) |
| 1.6 | 53|110PS(81KW) |
| 1.6 | 53|85PS(63KW) |
| 1.5 | 53|86PS(63KW) |
| Motor | Motorcode |
|---|---|
| 1.6 GTI | 17|110PS(81KW) |
| 1.5 | 17|70PS(51KW) |
| 1.5 D | 17|50PS(37KW) |
| 1.6 | 17|75PS(55KW) |
| 1.3 | 17|60PS(44KW) |
| 1.6 TD | 17|70PS(51KW) |
| 1.8 GTI | 17|112PS(82KW) |
| 1.1 | 17|50PS(37KW) |
| 1.6 D | 17|54PS(40KW) |
| Motor | Motorcode |
|---|---|
| 1.5 | 14|70PS(51KW) |
| 1.8 | 14|95PS(70KW) |
| 1.6 | 14|75PS(55KW) |
| 1.6 D | 14|55PS(40KW) |
| Motor | Motorcode |
|---|---|
| 1.6 | 155|75PS(55KW) |
| 1.6 | 155|72PS(53KW) |
| 1.8 | 155|90PS(66KW) |
| 1.8 | 155|98PS(72KW) |
| 1.8 | 155|111PS(82KW) |
| 1.6 | 155|110PS(81KW) |
| 1.3 | 155|54PS(40KW) |
| 1.8 | 155|112PS(82KW) |
| 1.5 | 155|70PS(51KW) |
| 1.8 | 155|95PS(70KW) |
| Motor | Motorcode |
|---|---|
| 1.3 | 16|60PS(44KW) |
| 1.6 | 16|75PS(55KW) |
| 1.5 | 16|70PS(51KW) |
| 1.6 D | 16|54PS(40KW) |
| 1.1 | 16|50PS(37KW) |
| 1.6 TD | 16|70PS(51KW) |
| 1.8 | 16|112PS(82KW) |
| 1.6 GLI | 16|110PS(81KW) |
| 1.6 | 16|85PS(63KW) |
| 1.5 D | 16|50PS(37KW) |
| Motor | Motorcode |
|---|---|
| 1.6 | 53|75PS(55KW) |
| 1.1 | 53|50PS(37KW) |
| 1.3 | 53|60PS(44KW) |
| 1.6 | 53|70PS(51KW) |
| 1.5 | 53|75PS(55KW) |
| 1.5 | 53|70PS(51KW) |
| 1.6 | 53|110PS(81KW) |
| 1.6 | 53|85PS(63KW) |
| 1.5 | 53|86PS(63KW) |
| Motor | Motorcode |
|---|---|
| 1.6 GTI | 17|110PS(81KW) |
| 1.5 | 17|70PS(51KW) |
| 1.5 D | 17|50PS(37KW) |
| 1.6 | 17|75PS(55KW) |
| 1.3 | 17|60PS(44KW) |
| 1.6 TD | 17|70PS(51KW) |
| 1.8 GTI | 17|112PS(82KW) |
| 1.1 | 17|50PS(37KW) |
| 1.6 D | 17|54PS(40KW) |
| Motor | Motorcode |
|---|---|
| 1.5 | 14|70PS(51KW) |
| 1.8 | 14|95PS(70KW) |
| 1.6 | 14|75PS(55KW) |
| 1.6 D | 14|55PS(40KW) |
- ✓ Hydraulic clutch
- ✓ Golf 1, Golf 1 Cabrio, Caddy 14D, Jetta, Scirocco
- ✓ Expansion tank with hose and clamp
- ✓ Hydraulic clutch slave cylinder
- ✓ Golf 1, 2, 3, Corrado, Vento, Scirocco, Caddy
- ✓ Conversion to 6-speed 02M,/02Q or 5-speed 02A,/02J transmission
- ✓ Brake force regulator 3/15
- ✓ conversion to G60 16V VR6
- ✓ OE NO: 486145
- ✓ Hydraulic clutch slave cylinder
- ✓ Golf 1, 2, 3, Audi A3, Seat Leon
- ✓ Conversion to 6-speed 02M,/02Q or 5-speed 02A,/02J transmission
- ✓ Golf 1, Caddy 14d, Scirroco 1, Jetta 1&2
- ✓ 02A/02J gearbox, 1.8T from Golf 4
- ✓ Golf 1 bearing outer diameter 64mm
- ✓ Complete set of 4
- ✓ Reinforced Shore 65-70
- ✓ Golf 1 Caddy 14D Scirocco Jetta
- ✓ 280x22 535615301 G60 brake disc
- ✓ 1-piston Girling 54 443615124A / 443615123A brake caliper
- ✓ front axle
- ✓ Complete KIT
- ✓ length 1.34m
- ✓ OE NR: C357721335E
- ✓ 4x100 to 5x112
- ✓ 20mm per side
- ✓ 57.1 -> 57.1 centering
- ✓ Registration free
- ✓ For shift linkage
- ✓ stainless steel
- ✓ Hydraulic clutch complete conversion kit
- ✓ Golf 1, Golf 1 Cabrio, Caddy 14D, Jetta, Scirocco
- ✓ Engine conversion from the Golf 4, original pedals are retained
- ✓ VW Golf 2, Golf 3 Passat, Corrado, Jetta, Vento
- ✓ 02a 02j 5 gear
- ✓ 1.8T 16V G60 conversion
- ✓ Suitable for our master brake cylinders
- ✓ plug and play
- ✓ quickly installed
- ✓ Golf 1, Caddy 14d, Scirroco 1, Jetta
- ✓ 02A/ 02J 5-speed, 02M 6-speed gearbox
- ✓ 1.8T, 1.9TDI, G60
Camber correction plates for installation on rear axle.Allow a perfect camber adjustment on your vehicle.
- ✓ For Golf 1 Caddy
- ✓ On Golf 4 Accelerator Pedal
- ✓ OE:VW 1J1721503E
- ✓ mechanical tension roller
- ✓ 1.8T engine conversion
- ✓ Golf 1, Scirocco, Caddy 14d
- ✓ Hydraulic line
- ✓ Golf 1, 2, 3, Corrado, Vento, Scirocco, Caddy
- ✓ Conversion to 6-speed 02M,/02Q or 5-speed 02A,/02J transmission
- ✓ 02M transmission conversion to FWD
- ✓ simple conversion
- ✓ Golf 1, Golf 2, 3, Golf 4 series
- ✓ 020 Gearbox
- ✓ 4&5Gang
- ✓ OE:VAG WZ 3104