Gesucht nach VW | Golf II | 1.6 | 19E, 1G1

• ✓ for VW Golf MK 4 Audi A3 Polo, etc 
• ✓ connection 1 M10x1 external thread bent
• ✓ connection 2 M10x1 internal thread straight
• ✓ lenght: 57cm / transparent covered

Gearbox cradle for gearbox exchange.For installation of gearbox typ 02M with 6 gears on Golf 2 3 Passat Corrado Jetta Vento.

• ✓ nipple adapter for conversion VW Golf MK1 MK2 MK3 Corrado, Vento, Scirocco, Caddy, to hydraulic line/cable

• ✓ setting / adjust gauge to adjust the 4 and 5 speed 020 gearbox on VAG Golf MK1 MK2 MK3 models, gear shift linkage

• ✓ gas pedal / accelerator pedal adapter / throttle control adapter for Golf 2, Corrado. Conversion to Golf MK4 engine

• ✓ for Golf MK2 and MK3 for exeample Corrado Jetta Passat
• ✓ conversion to mechanical clutch

• ✓ conversion kit to hydraulic clutch Golf MK4 Audi A3 TT
• ✓ suitable for Golf MK2, VW Jetta, Corrado and Passat 35i

• ✓ for Golf 1 series, e.g. Cadyy 14d Corrado Scirocco Jetta.
• ✓ Engine: base Golf 3, Golf 4 Audi A3 etc..
• ✓ Gearbox: 5-speed 02A/02J and CDA from base Golf 3 and 4

• ✓ 6 speed 4Motion 4WD gearbox conversion kit to convert into a 2WD front-wheel drive. Thus, the 6 speed 02M gearbox can be installed on any front-wheel drive vehicle.

• ✓ reinforced engine mounting bracket for VW Golf MK2, MK3, Passat, Corrado, Jetta, Vento

Camber correction plates for installation on rear axle.Allow a perfect camber adjustment on your vehicle.

• ✓ for e.g VW Golf MK1 MK2 MK3 G60 Passat Scirocco Polo Corrado Jetta, etc
• ✓ connection 1 M10x1 external thread bent
• ✓ connection 2 M10x1 internal thread straight
• ✓ length 57cm  / transparent covered

Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9

• ✓ engine and gearbox mounting bracket kit for conversion to 02M/ R32 V6 1,8T 6-speed transmission, combined with the VR6 R32 engine in Golf MK2, MK3, Vento

• ✓  sliding piece / slide for all 02M, 02Q 6 speed 02A and 02J  5 speed manual gearbox, e.g on VW Golf MK4 R32 models

Bolt circle adapter pour conversion from 4x100mm on 5x112mm.Allows use of Audi wheel rims on your vehicle VW.

Original VW gearbox pull cable. For the installation of a cable pull gearbox typ 02 A equipping G60 VR6 1,8T. Allows its installation with mechanical operation on VW Golf 1 Golf 2 Caddy und Scirocco 1.

• ✓ conversion kit to hydraulic clutch from Golf MK4
• ✓ suitable for Golf MK2, VW Jetta, Corrado and Passat 35i

• ✓ for rear axle: VW Golf MK2, MK3, GTI, VR6, Corrado, Jetta, Passat 35i, Scirocco, Vento, Polo 6N1, Seat Cordoba, Ibiza, Toledo
• ✓ brakce caliper: Audi R32 S3 rear
• ✓ brake disc: Audi R32/S3 rear 256x22mm

• ✓ gearbox nounting bracket for conversion to DQ250 DSG 6-speed gearbox into the Golf MK2 MK3 Passat Corrado

• ✓ for Golf MK2, MK3, for example Passat Corrado Jetta
• ✓ gearbox: 6 spedd 02M, based on Golf MK4 R32 / V6

• ✓ getriebe / engine mounting bracket for Golf 4 VR6 R32 engion on model Golf MK2  MK3, Vento

Short shifter in stainles steel. Tailor-made for VW Golf 2/3 Cabrio,Jetta ,Vento,Passat and Seat Toledo.
50-70% reduction of gear shift distance.

Original VW clutch bracket. For the installation of a cable pull gearbox typ 02 A equipping G60 VR6 1,8T. Allows its installation with mechanical operation on VW Golf 1 Caddy und Scirocco 1.

• ✓ for e.g VW T5 T6 bus / transporter
• ✓ connection 1 M10x1 external thread bent
• ✓ connection 2 M10x1 internal thread straight
• ✓ length 60cm  / transparent covered

• ✓ engine mounting bracket / support for Golf MK2 MK3 Passat Corrado Vento to install the VR5 engine

• ✓ clutch slave cylinder from VW Golf 4, Audi A3, Seat Leon and Skoda Octavia

• ✓ nipple adapter for conversion VW Golf MK1 MK2 MK3 Corrado, Vento, Scirocco, Caddy, to hydraulic line/cable

• ✓ Front sheet metal support  VW Golf MK2 MK3 VR6 G60 Jetta Passat Corrado to get more space to install a larger radiator

• ✓ for vehicle with PCD : 4x100 and hub diameter / hub centric : 57,1,5
• ✓ to rims with PCD : 4x108
• ✓ brake disc diameter : 57,,1
• ✓ enlargement per wheel : 20mm

• ✓ 1x steel strut bar / brace for front axle on models VW Jetta 2, Golf MK2 and Corrado

• ✓ 1x reinforced engine mount set for VW Golf 3 Vento VR6 16V GTI
• ✓ shore hardness 68

• ✓ for rear axle: Golf MK1, Golf MK1 Cabrio, MK2, MK3, GTI, VR6, Caddy 14d,Jetta, Corrado, Passat 35i, Scirrocco, Vento, Polo 6N1, Seat Cordoba, Ibiza,Toledo
• ✓ brake caliper: Porsche , reference: 996.352.421 + 996.352.422
• ✓ rear axle: brake caliper with mounting brackets from Audi S3 8L or VW Golf R32
• ✓ brake disc: Golf G60 5-hole  280mm VR6

• ✓ universal suitable for all vehicles with track rod ends / heads which have a M14x1,5 internal thread
• ✓ the reverse direction of installation of the head allows a deeper lowering of the vehicle

• ✓ front engine mounting bracket / support for Golf MK2 MK3 Passat Corrado Vento to install the VR5 motor

• ✓ reinforced gearbox mounting bracket / support for VW Golf Mk2, Passat, Corrado, Jetta, Vento to install the 5-speed gearbox 02A / 02J

Brake caliper adapter for front axle brake system to fix brake discs typ G60 diameter 280mm in combination with Porsche 986 Brembo 4 Piston brake calipers on VW vehicles.

• ✓ 2x brake caliper carrier and brake calipers for the front axle of the VW Golf 1, Caddy, Golf 1 Cabriolet, Jetta 1, Scirocco, Polo and many more to convert to the G60 brake system.
• ✓ 857615125, BDA168

• ✓ for Golf MK2, MK3 series, e.g. Passat Corrado Jetta
• ✓ gearbox: 6 speed 02M , based on Golf 4 R32 / V6

• ✓ adapter ring for the  Polo 9N wheel hub
• ✓ ABS Sensor ring Mark 20 from Golf MK4 can be taken over

• ✓ for vehicle with PCD : 4x100 and hub diameter / hub centric: 57,1
• ✓ rims with P.C.D. : 5x130
• ✓ rims diameter : 71,6
• ✓ enlargement per wheel: 20mm

• ✓ for front axle: Golf MK1, MK2, Mk3, Passat, Corrado, Jetta, Polo, Seat Toledo
• ✓ brake caliper: Porsche Cayenne or Tuareg, reference  7L6 615 123 T + 7L6 615 124 T
• ✓ brake disc: Golf MK4 R32 334x32mm , reference 1J0 615 301AA + 1J0 615 302 A

• ✓ axle journal VW Polo 6N2 GTI

• ✓ for e.g. VW Golf 1 2 3 G60 Passat Scirocco Polo Corrado Jetta, and many more.
• ✓ Connection 1 M10x1 male thread bent 45°
• ✓ Connection 2 M10x1 female thread straight
• ✓ Length 52cm long / Transparent sheathed

• ✓ for front axle: VW Golf MK2 MK3, Seat Ibiza Cupra R, VW Passat, Corrado, Jetta, Polo, Seat Toledo
• ✓ brake caliper: Porsche Cayenne (rear axle) , reference  955.352.421 + 955.352.422/  Brembo reference left 20.7673.03 + right 20.7673.04
• ✓ brake disc: Seat Leon Cupra R 323x28 reference 1ML 615 301