VW Golf MK2 Jetta 2 Corrado Steel Strut Bar Brace Front Axle Tuning

Who wants to finally drive with 5x100 rims, is here just right. Complete conversion kit, front and rear axle, to convert to G60 VR6 brake with bolt circle / pitch circle 5x100 and rims with 5x100 on Golf MK2 MK3.his is probably the best alternative to our bolt/pictch cirle adapters, because the track does not become wider. Suitable for all Golf MK2 MK3, Corrado, Jetta 2, Passat, with the narrow axle and ABS Advantages: no bolt circle adapter necessary simple installation: no drilling of the brake discs is necessary, etc. suitable for ABS the wheel arches do not necessarily have to be removed (of course, depending on the installed rim width) Delivery: complete conversion kit to G60 brakes with 5x100 bolt circle / pitch circle, front and rear axle, on models VW Golf MK2 MK3, Corrado, Jetta II, Passat mit ABS (see pictures)

Brake caliper adapter, rear axle, for the mentioned below models to install the Phaeton brake dics 310x22 mm, combined with the original R32 / S3 caliper Suitable for the following vehicles (front WD only): VW Golf MK1 VW Gol MK1 Cabrio Caddy 14d Jetta 1 Golf 2 3 + GTI+ VR6 Corrado Jetta Passat 35i Scirrocco Vento Polo 6N1 Seat Cordoba Seat Ibiza Seat Toledo Advantages of this brake system: High deceleration Thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles Directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling. Required components: internally vented brake discs 335x22 of VW Phaeton, reference: 3D0 615 601 D (the 5x112 PCD must be modified to 4x100 or 5x100, what we can do ourselves in our workshops) brake caliper: VW Golf R32 V6 oder S3 ,  VW reference left  8N0615423C + right 8N0615424C brake caliper mounting bracket: reference 8N0615425B The adapters are delivered black galvanized, therefore best rust protection and great look! Delivery: 2x brake caliper adapters VW Golf MK1 MK2 MK3 Caddy Scirocco Jetta VR6, etc 2x axle stubs, left and right 2x wheel hubs 4x100  2x suitable centric rings complete screw kit (10.9) material certificate

Brake caliper adapter for front axle brake disc system to fix Porsche /Brembo Panamera 6 piston brake calipers with R32 brake disc,diameter 334 x 32mm on all VW with bolt circle connection 5x100 mm, VR6 engine.Suitable for the narrow VR6 axle and Golf 2 axle when converting to 5 holes, e.g.: Golf 2,3 Corrado  Passat VR6 These calipers are used as standard for Porsche Cayenne, VW Touareg, and Q7. Required material for installation: brake caliper: Porsche Cayenne 958 GTS Panamera, reference 7PP615149J / 7PP615150J (Shaft length from the caliper must be 82mm, see yellow mark on the last picture) brake pads 95835193910 Brake discs Golf 4 R32 334x32 mm part no: 1J0 615 301A and 1J0 615 302 A Advantages: Best possible deceleration values ​​and performance, indispensable even for performance increases Suitable for the narrow VR6 axle and Golf 2 axle when converting to 5 holes, e.g.: Components come from mass production of VW With correct mounting registration with the TÜV possible Including complete screw material Scope of delivery: 2x caliper adapter complete galvanized for Golf 2.3 Passat VR6 Complete screw set high-strength material certificate

Rear axle, wheel offset plate for lowering up to 70 mm.The plates are made of high-strength steel, anti-corrosive protection, including mounting screws Suitable for the following VW and Seat models: Golf MK1 (only with our axle pivot pin, Epytec, item number 313) Golf MK2 MK3 + GTI+ VR6 Corrado Jetta Passat 35i Scirrocco Vento Polo 6N1 Seat  Cordoba Seat Ibiza Seat Toledo Technical description: Thanks to our axle offset plates which are fixed on the original axle, the axle pins can be simply be screwed 70 mm higher. The wheel is then 70mm higher in the wheel arch / house. The plates are manufactured and dimensioned in high-strength steel, but they are only made for show & shine. Delivery: 2x axle wheel offset plates for lowering high-strength mountig screws material certificate

Brake caliper adapter on models VW Golf MK2 MK3 G60 Passat Scirocco Polo Corrado Jetta, for conversion to the TTRS brake calipers, combined with the original R32 brake dics from Golf 4 R32 ( 334x32 bolt circle/PCD 5x100) Suitable for following vehicles: VW Golf MK2 and MK3 VW Passat VW Corrado VW Jetta VW Polo Seat Toledo Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Minimum rim size: from 17 inch rim can be used. Depending on the rim shape and type, the minimum size of the inner diameter can vary Required components: brake caliper: TTRS, reference left 8J0 615 107 + right 8J0 615 108 brake pads: reference 8J0 698 151 E brake disc: Golf MK4 R32  334x32mm, reference  1J0 615 301AA + 1J0 615 302 A Delivery: 2x brake caliper adapters for VW Golf 2 3 G60 Passat Scirocco Polo Corrado Jetta high strength mounting screws material certificate

Brake caliper adapter for 996 Porsche 4-piston brake calipers in connection with the 305x28 Cupra R brake disc suitable for all VW with bolt circle connection 4x100 on the front axle, e.g.: VW Golf 2 und 3 VW Passat VW Corrado VW Jetta VW Polo Seat Toledo  Required components: Brake calipers Porsche 996 Porsche .: 996.351.426 + 996.351.425 (a successful conversion is only possibile with the before  mentioned pieces) brake pads from Porsche 996 Brake discs typ Seat Ibiza Cupra R diameter 305x28mm Nr.: 6KL 615 301  Advantages: Significantly better perfomance than the standard brake system. Components come from series production by VW The material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles Including complete screw material  Scope of delivery: 2 high resistant adapter  galvaniced(see photo) High resistant screws for fixation Certificate of material

Brake caliper adapter for front axle brake system to fix brake discs typ G60 diameter 280mm in combination with Porsche /Brembo 4 Piston brake calipers with bolt circle 4x100 on the following VW vehicles: VW Golf 2 und 3 VW Passat VW Corrado VW Jetta VW Polo Seat Toledo Required components:  Brake calipers Porsche 986 Porsche or Porsche 996 part nr.: 986.351.422 + 986.351.421 or oder 996.351.421+ 996.351.422 (written   on the caliper) (a successful conversion is only possibile with the before mentioned pieces!!!)  Brake discs typ Golf 2/3 G60 diameter 280x22mm  Advantages: Significantly better perfomance than the standard brake system. Furthermore wheel rims size 15" can be driven on some vehicles Components come from series production by VW The material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles Including complete screw material  Scope of delivery: 2x brake caliper adapter completely galvanized (see photo) Complete screw set high-strength. Certificate of material Stress analysis for better registration

Brake caliper adapter on Golf MK2 G60 models for conversion to Porsche 996 brake caliper, combined with the Golf MK4 R32 brake discs, 334x32mm. Suitable for the following vehicles with 4x100 hub PCD: Golf MK2 Golf MK3 Passat 35i Corrado Advantages: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake calipers: Porsche 996 turbo , reference left 996.351.429 + right 996.351.430 brake discs: Golf 4 R32  334x32 mm , reference 1J0 615 301A and 1J0 615 302 A modification of the disc PCD to 4x100 (possibility of making it directly from EPYTEC) Delivery: 2x brake caliper adapters high-strength mounting screws material certificate Notes/tips: For a better ventilation of the brake system, we recommend removing the dust cover plates and brake anchor plate. For brake conversion on the rear axle, we recommend that you generally proceed as follows: install the adapter with the necessary components and then check if new brake lines are required. Because, depending on the vehicle, the lines may be too short or the line tips may not suitable. We advise you to change to steel braided brake line because of the quality and technical advantage. Specifically for this, we have developed an online brake line configurator, where you can assemble the type of steel braided brake lines you want. Click here to go to the configurator >> Stahlflex-Bremsleitung konfigurieren << always use the hand brake cable of the installed brake caliper. So sometimes you have to modify / adapt the new handbrake cable. For conversions, where the original caliper is used and the handbrake cable can be used, you may need to pull the cable without any other fittings (ie directly) to compensate for the long distance due to the large diameter of the large brake discs.

Brake caliper adapter for conversion to the brake calipers from Porsche 996, combined with the brake discs 312x25mm from Audi S3/Golf 4 GTI. Suitable for the following vehicles, for example: VW Golf MK2 and MK3 VW Passat VW Corrado VW Jetta VW Polo Seat Toledo Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: Porsche 996 (rear axle), reference 996.352.422 + 996.352.421 (only 100% suitable with the specified Porsche calipers) brake disc: Audi S3 (8L) /Golf MK4 GTI 312x25mm, reference  8N0 615 301 A The bolt circle must be re-drilled to 4x100 (with us in house feasible for 99€ for the pair of brake discs click here) It can be used with from 16 inch Delivery: 2x brake caliper adapters (see pictures) complete high-strength screw kit (10.9) material certificate