BMW E39 5 series adapter Brembo E38 caliper with E46 M3 325x28 brake discs
- ✓ 325x28 34112282801 34112282802 BMW E46 M3 brake discs
- ✓ 4-piston 34111163757 / 34111163758 BMW E38 brake caliper
- ✓ front axle
€151.30*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapters for the front axle of BMW E39 to install the large Brembo 4 piston brake calipers from E38 BMW, combined with the E46 M3 325x28 mm brake discs.
The rims must have at least 17 inch.
If the original BMW Styling 65 rims (original E39 M5 rims, with 245 / 40 / 18 tires) are used, 25mm track plates must be installed.
Advantages:
- high deceleration
- rims have 17 inch
- thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles
- directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems
- Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling
- screws are supplied
Required components:
- brake discs: BMW E46 M3 325x28 mm reference : left 34 11 2 282 801 ; right 34 11 2 282 802
- brake calipers: BMW E38 Brembo 4 piston reference : left 34 11 1 163 757 ; right 34 11 1 163 758
- brake pads: BMW E38 Brembo 4 piston reference : 34 11 6 761 254
Delivery:
- 2x brake caliper adapters (see picture)
- high strength mounting screws
- material certificate
- stress analysis
- Fitting instructions
Tips, information and advice:
- To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
- For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
- We cannot give you a generalised answer as to which rim size you can ride after your brake conversion. There are simply too many different wheel rims. For this reason, we have developed a template with which you can easily check whether the brake system kit fits under your rim. We have included a link to the template in the description. If your rim does not fit, you can simply use wheel spacers. >> Go directly to customised wheel spacers <<
- Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, which you can use to assemble and then install them according to your requirements. Click here for the steel flex configurator >> Configure steel flex brake line <<
- The handbrake cable must always be used from the installed calliper, which means that the new handbrake cable may have to be adjusted slightly. For conversions in which the original calliper is still used and the original handbrake cable can be used, you may have to route it more directly to compensate for the larger disc diameter and longer travel
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
7 April 2020 05:51
Erik V
Super Verarbeitung
23 November 2023 23:01
Elio R
Super product!!! Perfect fitting and very good packaging.
12 May 2017 22:13
33bella33
Alles super für das Geld
14 June 2019 11:48
sanja89
Alles bestens, gerne wieder!
28 August 2018 20:53
Martin L
Passung perfect. Artikel sich hochwertig hergestelt
27 November 2018 10:05
Dominik T
Produkt ist sehr hochwertig verarbeitet, würde ich sofort weiter empfehlen. Ich habe euch gewählt weil euer Unternehmen für solche Adapter bekannt ist. Einziger Kritikpunkt, es wäre schön wenn sechs schrauben mitgeliefert werden, weil so muss man zwei alte schrauben wiederverwenden. Aber sonst Top.
20 October 2017 14:46
karosselandwirt
Super
24 December 2019 00:03
vecks910
Passt perfekt, netter Kontakt und schneller Versand, gerne wieder
2 October 2018 11:13
Thomas S
Gute Qualität!!
8 April 2021 19:04
Pascal V
Emballé au top photo avant de partir suivi complet de l'envoi des pièces, pièce conforme et solide reste plus qu'à posé encore merci de votre rapidité je recommande Le seule point négatif et le prix je trouve sa un poil cher
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ Desired dimensions
- ✓ Quickly configurable
- ✓ Length, color and connections freely selectable
- ✓ optimized paste for brake systems
- ✓ correct viscosity
- ✓ no squeaking
- ✓ Length: 42cm
- ✓ M10x1 straight outside
- ✓ M10x1 straight inside
- ✓ Racing brake fluid
- ✓ Reduction in brake fading
- ✓ improved pedal feel
- ✓ 325x28
- ✓ 79mm centering
- ✓ 52mm height
- ✓ Registration-free
- ✓ Greenstuff sports surface
- ✓ temperature up to 650°C
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ Registration-free
- ✓ Redstuff ceramic covering
- ✓ temperature up to 750°C
- ✓ BMW E39 - 6 cylinders
- ✓ N54 N54B30 engine, manual transmission GS6-53BZ
- ✓ simple engine conversion
- ✓ Significantly higher boiling point
- ✓ Better pedal feel
- ✓ Suitable for the race track
